I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s
i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s
Did you fix the problem? I have the same problem and it has been pain in the neck.
Similar Messages
-
IPhone 6, problems with volume, automatically goes to the max when listening to the music
iPhone 6 iOS 8.1, sometimes when I'm trying to increase volume by 1 bar, it goes to the max and there is no way to decrease it without reboot. Had same problem before updating to iOS 8.1... I've never had that problem with my 5S, which is also on iOS 8.1. I'm using Beats Mixr headphones with remote. I've tried to restore the phone, didn't helped.
Yesterday I was listening to the music on iPhone 6 for about 4 hours and this happened 5 times, today I listened music from iPhone 5S for almost 5 hours and it didn't happended even once... I was using the same headphones... Any ideas?
THanks in advanceMy phone is not on mute, the volume is up to the max, there are no blue tooth connections, the phone will not ring only vibrate with the ringer on. I cannot hear any music through the phone either.
-
Hi,
i bought iphone 4s in london but now return to india . right now i can not access wifi option because wifi on/off grayed out or dim . and also battery got problem to retain power it automatically loose power even not in use. i went to local apple service centre they said could not repair in india.they said talk to uk apple centre. so what i do now please any one give guidence .You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.
1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware -
Having problem with siri on calling someone
Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number "
Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same!
whats wrong with that?i"m from Mauritius also having the same problem when calling someone using siri.
i think its because, of the 8 digits number. -
I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?
Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP -
Hi all, I got problem with my Safari!?
Hi all, I got problem with my Safari, same with Google Chrome, when trying to block pops-up. It's already ticked on BLOCK but everytime i click on new link, an annoyed pop-up appeared (game online, Mackeeper ...), any advice?
There is no need to download anything to solve this problem.
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Malware is always changing to get around the defenses against it. In addition to, or instead of, the files listed in the support article, you may need to remove the following items:
/Library/Application Support/dot
/Library/LaunchAgents/com.dot.agent.plist
/Library/LaunchDaemons/com.dot.daemon.plist
/Library/LaunchDaemons/com.dot.helper.plist
/System/Library/Frameworks/v.framework
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
G20 - Problems with volume wheel
My volume wheel isn't working as it should, when i'm trying to turn the volume down, it jumps up again. same when turning up, it's jumping down. To turn it up or down i have to turn and turn and turn before it moves. If I'm turning the sound up its like it's moving 1 up, 1 down, 1 up, 1 down, 2 up, 1 down... and so on.
Does anyone have any solution for this problem? It's like this in Qosmio player and Windows.
TrulsHi again
I am not technician but according to your explanation I believe that there is mechanical problem with volume control dial. On this way we can just speculate but just intensive check can give you an precise answer.
In my opinion you should contact Toshiba service partner in your country and explain them the situation. Sorry but I dont see any other solution.
If the warranty is still valid the repair will be for free. If you need ASP address you can find it under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Bye and good luck! -
CS5.5 Design Premium / Problems with "Apply today for its unique advantages"
English
Problems with "Apply today for its unique advantages," by clicking on any of the options available to redeem the link does not work.
Spanish
Problemas con "Solicite hoy sus ventajas exclusivas", al hacer click en cualquiera de las opciones disponibles para poder canjear no funcionan los link.Pat76 wrote:
Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on launch. I de-installed and re-installed the entire CS5 Suite on my iMac, but Indesign and Illustrator still keep on crashing while launching. I already rang the Adobe tech support but they are not very helpful at all... Its quite frustrating.
No problems here with CS5. After I upgraded to Lion I did update to 5.5 and still did not experience any problems. There are some handy articlles on Adobe's web site relating to compatability with Lion, but I have experienced none. Have you checked the third party plug-ins in Illustrator and InDesign for compatability if you have any installed?
Pete -
Problem with ProductWS_ProductInsertOrUpdate_Input api call
Hi All,
There seems to be an issue with siebel's ProductWS_ProductInsertOrUpdate_Input api call on release 14 of CRM OnDemand.
The api call is failing if I am trying to update and insert the product records in a same call based on the IntegrationId.
The Siebel CRM on demand URL we used is:
https://secure-ausomxapa.crmondemand.com/Services/I ntegration
The sample soap request used is:
<?xml version="1.0" encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/enve lope/" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:prod="urn:/crmondemand/xml/product" xmlns:ns="urn:crmondemand/ws/product/10/2004">
<soapenv:Body>
<ns:ProductWS_ProductInsertOrUpdate_Input>
<prod:ListOfProduct>
<prod:Product>
<prod:IntegrationId>AAPA-KYTAR</prod:IntegrationId >
<prod:Description>desc nk_test3</prod:Description>
<prod:Orderable>Y</prod:Orderable>
</prod:Product>
<prod:Product>
<prod:ExternalSystemId>nk_test4</prod:ExternalSyst emId>
<prod:PartNumber>nk_test4</prod:PartNumber>
<prod:Name>nk_test4</prod:Name>
<prod:Description>desc nk_test4</prod:Description>
<prod:Orderable>Y</prod:Orderable>
</prod:Product>
</prod:ListOfProduct>
</ns:ProductWS_ProductInsertOrUpdate_Input>
</soapenv:Body>
</soapenv:Envelope>
The response error is:
<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/env elope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instanc e" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server</faultcode>
<faultstring>Multiple matches found for instance of integration component 'Internal Product' using search specification '' in the business component 'Internal Product', based on user key 'Product User Key: 2'.(SBL-EAI-04390)</faultstring>
<detail>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault">
<siebelf:error>
<siebelf:errorsymbol>IDS_ERR_EAI_SA_MULTIPLE_MATCH </siebelf:errorsymbol>
<siebelf:errormsg>Multiple matches found for instance of integration component 'Internal Product' using search specification '' in the business component 'Internal Product', based on user key 'Product User Key: 2'.(SBL-EAI-04390)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Also the same soap request was passing when we are using old siebel crm on demand release 12 urls:
https://secure.crmondemand.com/Services/Integration or
https://siebel.crmondemand.com/Services/Integration
Also note that same API call works on release 14 if I perform all updates at one go and all inserts at one go.
So my doubt is:
1) Is there any change in handling of ProductWS_ProductInsertOrUpdate_Input api call for release 14 (or)
2) do we need to do some setup/configuration at siebel end?
Please help us in resolving this issue.
Thanks,
Nitesh KAlex,
Thanks for the reply. I can understand the same with the response error that there are multiple records with the same user key exists. But why the same error is not getting thrown if I submit the same SOAP request for those two products individually? I am able to submit multiple products which are new in one SOAP request and multiple products which needs to be updated(i.e i already have there ProductId and IntegrationId) in another SOAP request using the same InsertOrUpdate api call. But when I submit one product which is new(i.e. to insert) and one which already exists(i.e to update) in a single SOAP request, then its giving me that error.
One more strange thing is(as mentioned earlier) this same single SOAP request works in R12 of CRM OnDemand.
Anyways please find below how I tested my investigation:
I created two products in our BigMachines application "nk_11111_part" and "nk_22222_part" to integrate with siebel. Now I first generated SOAP request for nk_22222_part as below:
<soapenv:Envelope>
<soapenv:Body>
<ns:ProductWS_ProductInsertOrUpdate_Input>
<prod:ListOfProduct>
<prod:Product>
<prod:ExternalSystemId>nk_22222_part</prod:ExternalSystemId>
<prod:Name>nk_22222_part</prod:Name>
<prod:PartNumber>nk_22222_part</prod:PartNumber>
<prod:Orderable>Y</prod:Orderable>
<prod:Description>desc nnk_22222_part</prod:Description>
<prod:DealerInvoicePrice>454</prod:DealerInvoicePrice>
</prod:Product>
</prod:ListOfProduct>
</ns:ProductWS_ProductInsertOrUpdate_Input>
</soapenv:Body>
</soapenv:Envelope>
Then I submitted the request and got ProductId and IntegratinId as "AAPA-LF3CR" in SOAP response. This we will store in our DB and use it for updating the same product for subsequent calls.
Then I generated SOAP request for both the products nk_11111_part(not integrated) and nk_22222_part(integrated product) as below:
<soapenv:Envelope>
<soapenv:Body>
<ns:ProductWS_ProductInsertOrUpdate_Input>
<prod:ListOfProduct>
<prod:Product>
<prod:ExternalSystemId>nk_11111_part</prod:ExternalSystemId>
<prod:Name>nk_11111_part</prod:Name>
<prod:PartNumber>nk_11111_part</prod:PartNumber>
<prod:Orderable>Y</prod:Orderable>
<prod:Description>desc nk_11111_part</prod:Description>
<prod:DealerInvoicePrice>324</prod:DealerInvoicePrice>
</prod:Product>
<prod:Product>
<prod:ProductId>AAPA-LF3CR</prod:ProductId>
<prod:IntegrationId>AAPA-LF3CR</prod:IntegrationId>
<prod:ExternalSystemId>nk_22222_part</prod:ExternalSystemId>
<prod:PartNumber>nk_22222_part</prod:PartNumber>
<prod:Orderable>Y</prod:Orderable>
<prod:Description>desc nk_22222_part</prod:Description>
<prod:DealerInvoicePrice>454</prod:DealerInvoicePrice>
</prod:Product>
</prod:ListOfProduct>
</ns:ProductWS_ProductInsertOrUpdate_Input>
</soapenv:Body>
</soapenv:Envelope>
Now when I submit this request I am getting the above mentioned error. Note that both the products are newly created products in our application. So only user key ExternalSystemId with "nk_22222_part" for our integrated product exists
in siebel. So logically the InsertOrUpdate api call should insert the first product "nk_11111_part" and update the
second product "nk_22222_part". As mentioned earlier, the same flow works in R12 of Siebel CRM OnDemand.
We are struck with this issue. Please help us and reply asap.
Thanks,
Nitesh K -
HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number with out name pls what is the solution
When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Ok so first sorry for my english, Im not American.
2 months ago i bought a new Iphone 4 device from my phone company, after a month something happened to the home butten, when i pressed it it felt like something stuck in it.. like sand or dirt.. but the home butten worked perfectly. so i went to the phone company and they told me that it is a problem and they replaced it with a new one. but after a week my iphone fell and something happened to him so i sold it to someone i know, and with that money i bought a new one from privet store (unlike the last time, when i bought my iphone in a big phone company) and in the begining it felt new, i didnt had any problems, but 2 days ago when i woke up i pressed the butten and i noticed that the problem with the home butten is back.. and i dont know what to do.. i mean like its not a big deal or something, it just that when i buy something new, i excpet it to be new, and i want to ejnoy it while its new.
so i went to some guy i know and he told me that he will see what he can do, i paid him 130 Shekels (35$) and he told my that he replaced the butten with new one, but still it makes problems. it bothers me alot, because i pay almost 300 shekels per month (75$) and i expect from this device to be new.. and its killing me.
now, i cant go to the phone company because thats not their device, and i know what the people in the privet store will tell me.. that its my fault and bla bla bla.. so what can i do? i cant spend any more money on this..
its new.. for some reason this always happenes to me.. 3 devices, problems problems and problems..You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
IE problem with img tag calling stored procedure
I have an img tag in my JSP which looks like this (it has a very long src value):
<img src="http://www.enetrix.com/cores/net_charts.display_temp_chart?vChartDef_in=ChartType%20=%20DIALCHART;Chart
. . . and so on and so on . . .
26,%2075.0);&vChartType_in=PNG&vChartURL_in=http://333.333.33.333/j2ee/servlet/chart"/>
In short, the img calls a stored procedure and passes it a servlet among many other things. The procedure passes back an image to the browser.
The image shows up in Firefox but not IE 7. I don't think its an issue with the stored procedure but I can't understand why IE doesn't show the image. Is there something I'm missing? I've tried both jpeg and png.
Thanks
EricAs the related posts suggest, you will need to use direct JDBC code for this.
Also I'm not sure JDBC supports the RECORD type, so you may need to wrap your stored functions with ones that either flatten the record out, or take OBJECT types. -
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
Sounds like you need to contact skype.
Maybe you are looking for
-
Using Jar file images with READ_IMAGE_FILE built-in
Hello, I was wondering if it is possible to utilize images in a JAR file with the READ_IMAGE_FILE built-in. The Oracle Forms Configuration guide seems to indicate that I should be able to do this by using 'URL' with READ_IMAGE_FILE but no success so
-
Config settings for making Inbound delivery instead of TR
Hi, Scenario- Plant to plant stock transfer from Non WM plant to WM enabled Plant. Material document is posted and quant lies in st type 920. In the current system settings it creates TR automatically (Path - WM-interfaces-IM-define MVT - LE WM inter
-
Customer Account Statement sent by Email
Is there a procedure to send Account Statement by Email, at the moment, we can only Print.
-
Two-step verification is not available in "Passwords and Security" as it should be
In order to activate two-step verification for my apple account I was told to log in at appleid.apple.com, go to "Passwords and Security" and locate "Two step verification". It is not there. I answer the security questions, I can change my password,
-
CodedUI with MTM as a datasource no longer displays Errors on test failures
Alright, I have 2 simple automated test cases. One, TC1, uses MTM as a data source and the other, TC2, does not. Both are programmed to fail. When the TC1 fails no errors are displayed in MTM Test result but is available in the iTrace. When TC fails,