I got recently the temperature warning and now my iphohe wont charge up completly even with a full night recharge
i got recently the temperature warning and now my iphohe wont charge up completly even with a full night recharge
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. I suspect this is your problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.
Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.
-
Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it
updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried? -
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
-
Recently updated AE CS6 and now mxf canon wont work!
I'm working on several projects that use Canon mxf files in AE CS6 and everything worked just fine. Yesterday I installed the newest update and now it tells me they are unsoppurted or corrupted. I also switched from the trial to a paid version (but I dont think thats too important)
running
Win 7
32gigs of Ram
intel i7-3930K
nvidia quadro 2000D
3tb HD
After Effects 11.0.2.12
Thanks!
Edit: If i dynamic link from premiere, its all ok, but i enjoy having my AE projects be standalone...Undo the update - uninstall everything, run the Creative Suite Cleaner Tool, reinstall from scratch.
Mylenium -
HT4993 I upgraded to the new IOS 7 and now my phone wont charge
I upgraded to the new IOS 7 and now my phone wont charge
I just updated my phone last night while I was sleeping and because of the update my reliable fast charging cable stopped working. Guess what happened...my alarm didn't go off because my phone was dead. I have tried 3 different chargers and they don't work. I was dissapointed with the first IOS 7 update and now I'm mad. I have always been an apple supported for 20 years. They need to fix this IOS now or I will never buy another IPhone again. Just reverse these horrible "updates". Please give advice if anyone can, thanks
-
I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?
I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?
Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer. -
I did the new update and now my music wont play through speakers
help I did the update and now music wont play or text sounds dont work
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
as listed in the title, my phone just flashes on me no start up just flashes from the apple logo to shutting off and back and forth i did the update this afternoon (9-26-2012) and it still wont start up!!!
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
hi, for the last 3 hours i ve been trying to install and update itunes to the lates update....before my itunes would open just like i want it to and ever since i tried updateing to the new software my itunes wont open i get a code 2324....i realy dont want to have to put itunes on a diferent computer....please help on what to do to fix this and get my library back cause it wont open....please desperately need help
Laura BrownThe first step is to try this Microsoft fixit:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
If that doesn't work we will have to try something more complicated. It is a could not open file error message from the installer. -
I downloaded the new OS and now my music in itunes is not syncing with my ipad ideas?
I just downloaded the new version of iTunes. my music is backed up on my MAC but there is no music on my iPad2. Any ideas?
Hi there kmcgrogan,
I would recommend taking a look at the Wi-Fi troubleshooting steps found in the article below.
iOS: Wi-Fi settings grayed out or dim
-Griff W. -
please help!
Are you using iPhoto '11 on a Mac?
Try to print your Card (using the main menu bar "File > Print" or save the printed version to pdf.
Then you can check, which text still is default. The default text will be missing from your print - see for example the screenshot below. Also you can check the measurements on your printed copy. In the print menu you can use the arrow buttons to step through the pages of your card.
Regards
Léonie -
I think a pin inside my ipod has become a bit loose and now my iPod wont charge
Hello There
other the past weeks my iPod has become very unreliable at charging. it was not until today that i considered looking into the charging port! for weeks ive just been blowing in it! a few of the pins inside my ipod charging port (i think 2-3) have become a bit... loose and some seem wonky. i take a great amount of care with my iPod and will apple be able to service it? thanks
PeteNot Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 Gb 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this
You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom) -
So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
Maybe you are looking for
-
Can I retrieve data from a multiple select query?
I recently have been able to consolidate many queries into one large one, or into large compound queries. I found an instance where I am using a select query in a for loop that may execute up to 400 times. I tried building a huge compound query, and
-
I'm on a testing site on my MAC OS 10, but new to Firefox (5.01). I need to disable my pop-up blockers for a specific site. How can I do this? Thanks
-
Checkbox - type of domain in RFC function
Hello I'm dealing with such a problem, I try to bind input parameter (type CHAR1) to checkbox on Webdynpro view, what type of domain should have my input RFC function parameter to be able to bind it to the check box (I know about possibility of defin
-
Error in Clock-In/Out Corrections Application
Hi All, when i try to access the Clock-In/Out Corrections Application i am getting the below error. Can anyone help me to fix the above issue?? Regards, Mahesh
-
When trying to open a file in CC 2014
When we try to open a file in CC 2014 the program does not respond. Anyone out there having the same problem? It is so bad that we went back to InDesign CC. We have 5 PCs running Windows 7. .