I got reception problem in my 4g both gsm and wifi ? in form of very poor signal why*
i got reception problem in my 4g both gsm and wifi ? in form of very poor signal why*?? it was working fine suddenly the signal became bad and when i make phone call the other person on the seceond side doent hear me but when i use face time it is working , and the wifi signal is the same there is no or poor signal , signal improve only when i get closer to the modem that provides wifi at home or any wifi hot spot
is it antenna problem ? or what???
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
Similar Messages
-
i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it
That screen is asking you to connect the device to iTunes to restore it.
tt2 -
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.
Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy -
Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls againThe Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it. -
Video Download Helper does not work after most recent update. I have cleared cache and cookies, uninstalled both Firefox and the helper,that has not corrected.When Firefox does an update are the "vendors notified so they can see if their product needs changes in order to be compatible? This may sound like a stupid ?, but it makes sense tome. Telling me to download something else, in my eyes is not REALLY solving the problem.
Don't uninstall 36. Just download and install 35 over top and you don't lose any data. I already did and everything works just fine. But I did remove VDH first.
-
i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.
Try this.
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
The Wifi and 3G speed is even lower than iPhone 4s even Apple claimed that iPhone 5 is equipped with Ultrafast wireless.
The data shown by Speedtest show that iphone 4s get a 20Mbps download speed while iPhone 5 is 9Mbps, which testing in same area connected to same
wifi.
And 3G connection is not much improve (although safari page load faster, but I believe this is result by A6 chip, it should be faster with normal connection ).
The other problem is there is static line on the virtual keyboard when i key in password in iTunes (not always). One of my friend which is also an iPhone 5 user
facing the same problem.
Hope these are software problem and Apple can fix them in the future iOS update. thanksRead here:
http://support.apple.com/kb/ts1398 -
I have tried two versions of firefox, 4 and 5, but none work.
Thank you.Missing:
# description of problem
# what is it supposed to do
# what does it do instead
Does it work in Firefox Safe Mode (see below)
Also check [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
Restart Firefox in Safe Mode with Help ("Alt+H") > "Restart with Add-ons disabled" to restart immediately (one-time) in safe mode. Do not check-mark any of the items (they are certainly not safe as they make those changes permanent). -
Problems using itunes on both desktop and laptop
i use laptop mainly for itunes but have downloaded softawre onto desktop now, however, the desktop version does not seem aware of my full catalogue of songs. how do i update my desktop to mirror the laptop??
Please helpCopy the songs from one computer to another?
http://docs.info.apple.com/article.html?artnum=93366 -
Problem viewing video in both YouTube and ArtBeats, firefox hangs
when I click a youtube link it registers an error, however, works in safari.
Also, on artbeats site, trying to view their videos actually crashes firefox. I am using mac, osx 1.5.8*For FF*
FF>Preferences>Applications
In the Action section - Change QT plugin to QT player.
I don't use Safari. Maybe you can do the same in its Preferences. If not, hopefully a Safari user will chime in here.
BTW: Any reason why you haven't updated FF to v3.0.2? -
A1430 on the iPad (3rd generation) Wi-Fi + Cellular
I have this model of iPad Above!
I have bought this iPad3 in India
Please tell me if its GSM/CDMA also give the link to restore it to iOS6.1.3
I tried both .ipsw files, but for both the files GSM/CDMA iTunes said Invalid package file
Need help!
Reply ASAP
Thank You! Regards :)Hi
my connection is not good i tried to download ipsw via itunes and few time i lose connection also that file got again zero KB and wanna download that again so for this issue me and other need to download ipsw as direct with download manager or anything wich file will not lose and has resume so need to help more also know which ipsw we could download
please help us more
thanks -
Both headphones and speakers play aloud at the same time, why???
I have just purchased macbook pro... im in windows XP right now. I installed an mp3 player, Winamp, put my headphones on and the music comes through the headphones AND the speakers on the laptop at the same time. Why is this? I thought sound is muted on the computer once you plug the headphones in. Any ideas or suggestions is appreciated!! thanks
-Allison
email me: [email protected]I originally posted in another posting, didn't realize this was posted twice. In case, you didn't realize you posted twice,I'll copy my reply in both messages.
The sound card on the macbook has a combined optical digital audio output/headphone out (minijack). So sound is being piped out both sound outputs in OSX and XP.
The difference comes in because XP and the windows sound drivers for that card, do not know how to handle dual digital audio outputs and instead of shutting down the internal digital speakers(on our Macbook)when say your headphones are plugged in, windows just leaves both digital outputs open.
To resolve this issue, contact Apple or the soundcard vendor to obtain a Windows XP driver that supports digital output on the dual-mode analog/digital capable sound card.
To work around this issue, use analog speakers or headphones.
Hope this Helps!
Mac OS X (10.3)
Mac OS X (10.2.x)
Mac OS X (10.2.x) -
Problems with Safari, Acrobat, Intel Macs, and Life Cycle Form Mgr.
Here is my problem:
A Mac user using 10.4.10, with Acrobat Standard Ed v.7.0.9 installed,
is having to approve purchase forms through Adober Life Cycle Form Manager
through Safari 2.0.4. When trying to approve the PDF forms, it tells her
she needs to have Acrobat v.7 installed, and only shows a white page.
Went back and launched Acrobat 7.0.9, and did the "Detect and Repair"
setting to verify the Adobe PDFViewer plugin was installed.
Said it was, checked the Library/Internet Plugins folder and it was.
Launched Safari, Safari's list of plug-ins does not show it as being installed.
Trashed the Safari .plist file, relaunched Safari, same thing.
Read on the Apple site that people were experiencing similar issues,
Read on Adobe's site that for Intel Macs, should be using v. 8.01.
Downloaded the 8.01 Acrobat Reader and installed it.
re-launched Safari, success, it says the plugin, v.8.01 is installed.
Go back to Adobe Life Cycle Forms Manager, go to view a PDF,
at 100% screen size, PDF shows correctly. Zoom in on details,
PDF goes blank, will not show details. Zoom back out,
PDF goes white page, no info displayed.
My Questions:
1. is it an issue with Adobe Life Cycle Forms Manager and Safari on Intel Macs?
2. Is there a way to get a proper plug in for Safari, so that Acrobat will read the PDFs
instead of the default Preview?
thanks in Advancebump
anybody running ALCFM and Acrobat 8 with an Intel Mac,
are you running into issues with approval of PDF forms? -
Problems uploading files across all browsers and wifi connections?
Hello
I've been having a bit of a strange issue with my MacBook Pro lately, it seems to have problems with uploading images/files onto certain websites. Two recent occasions have been failure to upload image content when signed into the admin area of my business website, as well as failng to upload a .pdf to a business card printing company.
When I try to upload content to certain websites, I get an animated uploading bar from said website's interface, which just stays looping and never finishes the upload, seemingly stuck uploading for all eternity!
I am having this problem on Safari, Firefox AND Chrome. I have cleared the cookies, caches, history etc. on all browsers in an attempt to fix the issue with no luck. I have also tried all three browsers on various wifi networks with no luck.
I know it is not an issue with the websites, since having this problem I have used other computers on the same various wifi networks which have uploaded the content immediately with no problems.
I have performed software update and everything is as up to date as can be! I don't know what else to try, any suggestions?Run a free ClamXav scan on your entire hard drive.
Maybe you are looking for
-
On my IPhone 5s, there is a symbol at the top of the screen and it looks like a circle with a lock inside. What does it mean and how do I remove it?
-
Help me!! Can someone please help?
find out how to authorize a computer for iTunes??? Someone?? Anyone? <Edited by Host>
-
Accessing a network resource via javascript
Hello, we have been using Adobe Reader for linux provided by the yum repository for quite some time, without major issues. Currently, however, we are seeing a mysterious problem with a PDF form which is designed to exchange data with a local server,
-
Gentlemen, good afternoon I have a problem using a Forms Developer 9i database procedure which has created a synonym. Turns out I invoke this procdimiento created a basis other than that I'm using to compile my form. Low elo environment PL / SQL that
-
Errors when changing jbo.ampool.doampooling
Hi. I turned jbo.ampool.doampooling=false to test my app. All objects in the processScope disappears between http requests. I had the same error passivating in the database or in the filesystem. I have put jbo.debugoutput=console and seems to be pass