I got speaker problem on iPad 2 once after I upgraded to iOS 7.3. Any idea? Please help
I got speaker problem once I upgraded my iPad into iOS 7.0.3. Any idea? Please help.
Go into the settings and reset all settings. See if that helps.
Similar Messages
-
Can anyone tell me how to sync my new ipad with my keyboard as it doesn't recognise it even after I put in the code given when trying to pair it. I have tried to reboot the ipad but that didn't work either. Very frustrated. ,
It was given to me by someone that spilt a drink on it and they dried it but went and bought a new one. It finds the ipad but won't sync once I put the code in. I have looked at support etc and they recommend unsnycing from the original computer. But as I have no access for this is there any way I can reset the keyboard to pair my ipad?
Thanks -
No sound in my iPad 3 after I upgrade to iOS 6.0
HElp
If you DO have sound in the Music app, this will probably apply to your problem.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Can anyone advise me how to solve sudden respring of my ipad air after the upgrade to ios 8.
MY ipad Air goes blue and resprings now and then after ios 8 upgrade? Is ios 8 creating this problem? Can anybody advise how to solve this problem? I have tried resetting my device but this did not solve the problrms.
Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
How do I get the location services switch to turn On for my iPad mini after I upgraded the iOS?
I just loaded the google map app into my iPad mini.
How do I turn on the location services switch?
I can touch the switch, but it just does not go On.Settings>Privacy>Location Service>On
-
I can't get 3g signal for my ipad 2 after i upgraded to ios 5.0.1.
it was normal when i was still using ios 4.3.3, but once i upgraded, i cant get any 3g signal anymore.
i tried reset network setting but it doesn't work. help~~
-
I recently upgraded my ipad to update 8 today its gone blank. any ideas, please
my ipad turns on but i only get a blank screen. the code pad is there but hidden behind a blank screen i recently upgraded but now i am regretting it.
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. -
i cannot mirror from ipad or ipad air to a samsung smart tv via appletv.Any ideas please?
I have tried with an Ipad Air and Ipad using Op System 8.0.2 to mirror their contents to the screen of my Samsung Flat Screen Flat TV via the latest make of Appletv.I have spent over 2 hours going through all settings etc with Apple Customer Service Live Chat.They cannot find or replicate the problem and says it is all working fine.My TV screen displays, when i go into mirroring, "ready for connection - on your device launch Allshare Cast".Nothing happens although i have agreed with Apple Support that all settings are on and are correct.Can anyone help please, as Apple Support cannot?
-
hey guys i got a problem connecting with itunes always giving me ox80090318 if u know the answer please let me know thx
Hello Makiaveli,
It sounds like you are getting this error code when you are trying to access the iTunes Store.
I found this article with this error listed in the symptoms section, for you that should help troubleshoot the issue named:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
To find the LSP:
Download Autoruns for Windows from Microsoft
Look for Autoruns.ZIP and open the compressed folder.
After reviewing the contents and the license, drag autoruns.exe to the desktop.
Open Autoruns.
Click on the tab that says Winsock Providers.
A list of items should appear. A column showing the publisher should be available.
For items other than Bonjour, which is from Apple, check with the publisher for updates to resolve the conflict between their software and Apple software.
If the publisher is unfamiliar to you, you may be able to use the table below to find out more information about the origin of the modifications to Windows.
Some of the publishers and programs that are known to have versions with a conflict are listed below:
Product or Publisher
LSP Name
Bigfoot Networks / Killer Gaming
BfLLR over [MSAFD Tcpip [TCP/IPv6]]
Bsecure
Bsecure over [MSAFD Tcpip [TCP/IP]]
Bullguard
BGLsp over [MSAFD Tcpip [TCP/IP]]
Bytemobile, Inc.
BMI over [MSAFD Tcpip [TCP/IP]]
CA / Total Defense Internet Security
LAYERED_PROVIDER over [MSAFD Tcpip [TCP/IPv6]]
ContentWatch / Net Nanny
CWALSPSYS CWALSP MSAFD Tcpip [TCP/IP]
Covenant Eyes
Covenant Eyes Monitoring over [MSAFD Tcpip [TCP/IP]]
Dr. Web
DrWebSP.4 over [MSAFD Tcpip [TCP/IP]]
Earthlink Total Access
PropelLSP over [MSAFD Tcpip [TCP/IP]]
Eset
NOD32 protected [MSAFD Tcpip [TCP/IP]]
Fourelle Venturi
VENTURI_TP [MSAFD Tcpip [TCP/IP]]
FoxyProxy
FoxyProxy Service Provider over [MSAFD Tcpip [TCP/IP]]
Hide My IP / My Privacy Tools
My Privacy Tools - LSP over [MSAFD Tcpip [TCP/IP]]
MegaUpload / MegaKey
msadmid over [MSAFD Tcpip [TCP/IP]]
Netintelligence
NIHLSP over [MSAFD Tcpip [TCP/IP]]
Netscape Internet Service
SlipStream LSP over [MSAFD Tcpip [TCP/IP]]
Netsweeper
Liger over [MSAFD Tcpip [TCP/IP]]
Norman/Norman Security Suite
NLF over [MSAFD Tcpip [TCP/IP]]
Panda AntiVirus
PAV_LAYERED over [MSAFD Tcpip [TCP/IP]]
PC Tools / Spyware Doctor
PCTOOLS over [MSAFD Tcpip [TCP/IP]]
PureSight Internet Content Filter
Winsock over MSAFD Tcpip [TCP/IP]
Ratajik Software StationRipper
AVSDA over [MSAFD-Tcpip [TCP/IP]
Safe Eyes / McAfee Family Protection
Internet Content Filter over [MSAFD Tcpip [TCP/IP]]
Sendori
SendoriLSP over [MSAFD Tcpip [TCP/IP]]
SpeedBit Video Accelerator
SBLSP over [MSAFD Tcpip [TCP/IP]]
TellyAbroad
EasyHideIP over [MSAFD Tcpip [TCP/IP]]
Trend Micro
Trend Micro LSP over [MSAFD Tcpip [TCP/IP]]
VMWare
VMCI sockets DGRAM
Wave / Embassy Trust Suite
Wave Systems Kerberos LSP over [MSAFD Tcpip [TCP/IP]]
XFire
Xfire_LSP MSAFD Tcpip [TCP/IP]
Once you've identified the third-party software that installed the LSP, you should check for updates. If the software is your security software, see iTunes: Troubleshooting security software issues for additional information.
Bytemobile is usually associated with cellular data connection software. You may want to check if your provider has instructions to disable or uninstall that portion of the software, such as these instructions from AT&T.
Note: If unsure on the origin of your LSP, you may try to locate vendor information to determine which software is responsible for the non-default value here.
Thank you for using Apple Support Communities.
Cheers,
SterlingD -
First post I have just updated iPad to latest iOS and now I can't sync my music in iTunes form Mac which is running latest version it starts but stops straight away and gives no info I've tried with wifi off and on turned everything off and back on but nothing as any one got any idea please ?
I have the exact same problem! It started this month, I don't know what to do
-
I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones! -
My Iphone got stuck showing a itunes symbol after the download of IOS 7..is there a way i can get it to start apart from restoring...i need to get somewhere and i cannot leave the phone behind however it wont start otherwise?!! any help
Rishitani wrote:
..is there a way i can get it to start apart from restoring...
Nope.
Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766 -
I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated
Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Just got home with my ipad and its asking for a passcode which i haven't set.....any ideas please???
just got home with my new ipad and its asking for a passcode to let me in - haven't set one up, wasn't told about this in store, any ideas please???? Have tried my apple password & my passcode i use with my i-phone but none works.
Was this a used iPad? Try going to Settings > General > Reset > Erase All Content and Settings. This will completely restore the iPad to brand new. It will erase all content, but since the iPad is brand new and you haven't made any changes to it, there is no content that will be erased. Except the passcode, of course
-
Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).
Maybe you are looking for
-
Has anyone else been mislead by Time Machine?
Before I start, I'd like to make a little disclaimer that before the trolls set to work on berrating my naivity for the problem i've suffered, i'd just like to say "I KNOW THAT NOW" and hindsight is such a wonderful thing but unfortunately, the simpl
-
Problem in importing from dmp file
Hi , I am facing problem while importing from dmp file on unix server Error is as follows : Export file created by EXPORT:V08.01.07 via conventional path IMP-00013: only a DBA can import a file exported by another DBA IMP-00000: Import terminated uns
-
Hi!, I'm using Fop to PDF generation from XML file and XSL:FO file, the last one is xsl with namespaces fo. My problem is that, I get, from java class, generatting a PDF file from fo file, but, I want to get a PDF file from XML file and XSL:FO file.
-
hi TO ALL, Can u tell me "regarding TDS" step by step procedure in CIN area? How can i list out TDS vendor? Regards kavi
-
Variant Functions for PP Routings
Hello, is it possible with the "Variant Functions" to call in a super routing a FM to get some values from a ZTABLE to use this values in the object dependency syntax to changes values in the routing? kind regards, Bernhard