I got the iphone 5 and it does not show as a device in itunes??

how do i get my iphone 5 to show as a device in itunes?

The iPhone 5 running iOS 6 requires iTunes 10.7. Start iTunes on your computer and use the menu to see About iTunes and determine the version. Is it 10.7? If not you must update iTunes.
Note that iTunes 10.7 requires OSX 10.6.8 or higher on a Mac.
If your iTunes is already at 10.7 then reboot your computer and reset your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Similar Messages

  • How come the song and album does not show up on top of the new iTunes?

    I just downloaded the new iTunes and when I go to play a song, the title and album does not show up on the top of the screen.  The only thing that is there is the Apple logo.  Does anyone know why this is? and how can I get it to show the song title and album.
    The song is playing right now, but it is not showing up where it used to.  (Where the Apple logo is)

    See also:
    *https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Resetting_preferences

  • Ipod touch does not show up under Devices in iTunes, but it does in iPhoto

    My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto.  Can anyone help troubleshoot this problem?
    Thank you for your help.

    try following the info here
    http://support.apple.com/kb/TS3694#error1611
    Error 1611: This error may indicate a hardware issue with your device.  Follow the steps  in this article. Also attempt to restore while connected with a  known-good 30-pin Dock Connector cable, computer, and network to isolate  this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0)  can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611.    To troubleshoot third-party security software, follow these steps.

  • I can't sync my ipod and it's not showing up in devices in itunes

    I bought my son an iPod touch and we are not able to sync it to get our music off the computer. The iPod isn't showing up in devices in iTunes and there are no devices showing up or even the word devices. Please help so we can get our music onto his new iPod. Thank you very much!!

    Alot of us are having the same problem witht he new version of Itunes... Apple needs to fix their own side of the problem cause no support they are giving us is working! Also half of the answers from the community are risky/ waste of time answers that are unsure if they will even work, and to many that try -Don't work!
    Ive been trying since yesterday to get an answer, no one is helping :/
    Similar thread to the problem here:  https://discussions.apple.com/thread/4625288

  • HT1430 if i've tried to reset the iphone and it does not work, what should i do

    I've tried to reset my 3GS iphone and it's does not work.  My son as lock-out the phone and i cannot go into it again

    Needs to do recover mode
    Forgot Passcode use recovery mode to restore
    http://support.apple.com/kb/HT1808

  • Firefox installed version 5. I cannot find the place to change privacy settings. I have searched the Help and it does not show how to edit mine. I have Vista. I urgently need to enable cookies. Help

    I have searched under the Firefox dropdown box and cannot find tools or privacy settings.

    Click the Firefox button, click Options, click Options, from there, everything is the same as before (click Privacy and be sure first item "Firefox will:" is set to "Use custom setting for history" to see all of the settings on that panel).
    You can still use/see the Menu Bar (''File, Edit, View, History, Bookmarks, Tools, Help'') if you prefer it:
    *'''Temporarily display the Menu Bar''': press the ALT key for the F10 key and make your selections from the temporarily displayed Menu Bar
    *'''Toggle between the Menu Bar and Firefox button'''. Do one of the following:
    **NOTE:
    ***Menu Bar '''checked''' = Menu Bar on, Firefox button off
    ***Menu Bar '''un-checked''' = Menu Bar off, Firefox button on
    **keyboard shortcut: HOLD the ALT key while pressing the letters VTM on your keyboard
    **Using the Menu Bar: click View > Toolbars, click Menu Bar
    **Using the Firefox Button: click Firefox Button > Options, click Menu Bar
    **right-click on an empty space in one of the toolbars, click Menu Bar
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *Adobe PDF Plug-In For Firefox and Netscape
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
    #**Use either of the links below:
    #***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
    #***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*After the installation, start Firefox and check your version again.

  • Sound and audio does not show up in device manager hp pavillion dv6500

    No audio output device installed. Sound and audio not listed under device manager hp pavillion dv6500 system bios f.2a-02/22/2008

    Hi @Cynthia0 
    I understand that you have no audio device showing up in device manager.  I am happy to help you with this.
    Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Once I have that, I can find the proper driver and support page for you.
    For now check through this page: Resolving No Sound or Audio Problems (Windows Vista)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • AppleTV does not show up in Devices in iTunes on streaming MacBook Pro

    My setup:
    - AppleTV connected wirelessly to the wireless router (Apple Extreme N Base Station).
    - Windows PC wired to the router and set up as machine that is sync'd to the ATV.
    - MacBook Pro connected wirelessly to the router and set up as a streaming machine.
    - All machines run iTunes 7.3.
    The AppleTV appears as a device on the Windows PC. No problem there.
    However, the ATV does not appear in the Devices list on the MacBook Pro 99% of the time and so I am not able to select it and change the photo albums I want to link. It occasionally appears. But I have not found a pattern to why it appears and disappears. Even when it does not appear in the Devices list, streaming from the MacBook Pro works just fine. So even as I am streaming, say, a podcast from my MacBook Pro, the ATV never appears as a listed Device.
    I can make the ATV temporarily appear by unlinking the MBP from the ATV and relinking it. During the link process, the ATV appears in the Device list. But it disappears as soon as the code is entered in the MBP.
    Confounding problem.

    how would
    it be if your mac continued to show every network
    device, firewire/usb drive that it had ever connected
    to whether they were still connected or not.
    Yes, it would be annoying if EVERY device that my Mac had ever connected to did show up all the time even after they were disconnected.
    However, there are some classes of devices that you do want your Mac to remember and show as available if they are detected active on a network. An example would a Bluetooth device that you have deliberately paired and designated in the Favourites list. If it was subsequently decided that this device should no longer appear, then removing it from the Favourites list does that.
    In my opinion, the AppleTV should fall in the same category. Since pairing is required and subsequent dissociation is possible by removing it from the iTunes list of allowed AppleTV units, then it should appear on iTunes' list of Devices as long as it is detected on the network. If the ATV is unpowered or if the PC moves onto a different network, that that ATV should not appear in the Devices list. There is an advantage for the logic to be implemented this way for the reason I have mentioned in an earlier post (i.e. being able to change the list of photo albums designated as available for streaming without having to go to the ATV, select the source PC, then going back to the PC to change the list).
    But again, just my opinion. It's always good to discuss these things so that others can see different opinions on an issue.

  • IPad does not show up in devices under itunes, cannot synch

    The initial time I plug my mom's iPad into her laptop her iTunes does not auto launch like it should, so if I launch it, it doesn't show me devices so I cannot mannually start to synch.  Help!

    Two things: if Preferences have been changed in iTunes to not sync automatically upon connecting the iPad then iTunes will/should not launch. You have to do it manually. I suspect the setting is not the problem so see here-
    1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    2. Try all the other ports on your computer, even a number of times.
    3. Make sure your lead /connections are not faulty.
    4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    5. Make sure you have the latest version of iTunes installed.
    6. If using Widows, make sure all Windows Updates are installed.
    7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://support.apple.com/kb/HT1808

  • HT1386 iphone and ipad no longer show up as devices in itunes

    my ipad and my i phone no longer show up as devices in I tunes. I have so far shut down and restarted the PC, ipad, iphone, uninstalled and reinstalled the itunes program, done the ''reset all" in settings on my ipad, changed USB ports. Any suggestions?

    On your computer, try going into your control panel, add/remove programs and uninstall iTUnes, apple mobile device service, apple application support. THen redownload and reinstall iTunes and see if it works.

  • My iPhone and iPod do not show up on iTunes when connected to my mac.

    iPhone and iPod do not show up when connected to iTunes.

    See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

  • Just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password

    just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password.

    If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
    http://iforgot.apple.com
    If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
    If that's not the "password" you meant, please post back and clarify.
    Regards.

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the  same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

    I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

    This is covered in the basics section.
    A restore loses nothing.
    A restore does.  If you are using the iphone as designed, then everything should be on your computer.

  • HT4972 My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

    My IPad 2, IPhone 3GS ans iPod  no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

Maybe you are looking for

  • PC and Windows 8.1 used mark illustrator error: 16

    I have a PC and Windows 8.1 used mark illustrator error: 16 Perform reinstallation of the program and the error continues .

  • Imessage is on but message is being sent as text and phone is not recieving imessages

    Over the past month since the ios 7.1 update I have been having imessage problems. With imessage enabled and utilizing wifi and cellular data, the phone will send out messages as texts to other iphones and not as imessages and i am not receiving imes

  • RE: Enhancement

    Hi Experts, in 2lis_04_p_arbpl datasource not having field IGMNG in both extract structure & commnication structure but backend table AFKO is having this field if can i enhance this to datasource i need to write ABAP code or not let me know this . Re

  • Two issues with HP5514 wireless printer

    I have 2 issues that I've had since I installed the Photosmart 5514 a year ago... I get giberesh on my printouts.  Seems to be narrowed down to sending a 2nd doc to the printer while it is printing the first doc.  When it gets the 2nd doc, the first

  • T code for a menu path

    Hi I know the menu path and when I check  for T -code , I did not find one. How do I get tcode . that really helps me to go directly to transaction rather than going menth path every time regards Kumar