I got tis ipad 4g from ireland recently and i brought it to india with me and i got tis micro sim from a local service provider and it was activated 3 days later and show the name service provider at the top but no internet signal.pls help

pls help

agil123 wrote:
wud u not be able to get internet without signing up for data service
Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service.

Similar Messages

I got tis ipad 4g from ireland recently and i brought it to india with me and i got tis micro sim from a local service provider and it was activated 3 days later and show the name of service provider at the top but no internet connection.pls help

pls help

agil123 wrote:
wud u not be able to get internet without signing up for data service
Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service.

I got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage so i want to know the steps u take to activate the micro sim in the ipad .

i got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage as i dont have wifi in the place tat i am staying so i want to know the steps involed to activate the micro sim in my ipad.

What roaming charges? If you have a local plan there are no roaming charges. This is a major reason for using a local plan.
Contact, or visit the website, whatever local provider you are considering and get their plan details.

Last month I was 1 day late paying my bill, so I tried to pay the full amount. But the website would only allow me to pay the current bill amount. Now, I show a past due amount. If I tried paying it and Verizon didn't allow me, how is it past due?

Last month I was 1 day late paying my bill, so I tried to pay the full amount. But the website would only allow me to pay the current bill amount. Now, I show a past due amount. If I tried paying it and Verizon didn't allow me, how is it past due?

I'm confused - If I go online to pay my bill, and it's one day after the due date, the current bill and full amount due would be the same? If the current bill is not the "full amount due", then what is the extra amount that's snow showing past due?
Also, when I go in to pay my bill, I show the Current bill amount, total amount due (which are the same), and then a box where I can type in the amount I am paying, with the default amount being already filled in with the total amount.
Is this a pre-paid or a post-paid (contract) account?

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

I am using the big date calendar template and when I submit it to apple for printing I lose the name of two months. These names are not text boxes. I see the names when I send it in but something happens during the transmission to apple. It was suggested

I am using the big date calendar template in iPhoto. I am on Lion 10.7.2, macbook air. The names of the months are on each calendar page but something happens when I send the data to Apple. The names are part of the template. They are not text boxes. I lose two names on the calendar after it is sent to Apple. Apple suggested I make a pdf file of my calendar before sending it in and check to make sure every name shows. I did this with a calendar I just sent in. The calendar was correct. All names of the months were showing. After sending the data two month names disappeard because when it arrived by mail, it was incorrect. Apple looked at my calendar via a pdf file and it was incorrect. This is second time this has happened. I called Apple and they had me delete several folders in the Library folder, some preferences and do a complete reinstall of iPhoto. I have not yet remade the defective calendar. I am wondering if anyone else has had this problem?
kathy

Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
You can also save the pdf as a file to compare to the printed calendar. If the two names are visible in the pdf file then the printed copy should show them. Contact Apple for a refund. Apple Print Products - Apple Store (U.S.)

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone

I have a uk ipad2 with 3G and am going to the USA I want to get a micro sim from AT

I have a UK ipad2 with 3G and am going to the USA. I want to get a micro sim from AT&T so that I can use 3G in the USA. My question is that I know that I will need to sign up for an AT&T account on my Ipad.
Do AT&T accept foreign credit cards so that I can do this? I only have a european Visa/Amex credit card.
If they don't, is there any way that I can purchase a dongle in the USA and use a USB adaptor on my ipad2?
I appreciate any feedback - i have spoken to loads of people from Apple and AT&t but noone seems to know the answer.
thanks

You need a US credit card with a US address.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Everytime I come to purchase neverwinter nights 2 it won't let me, and brings the following error message up; 'There was an error in the App Store. Please try again later (100). It is later, days later, and still nothing is working. Help!?!

Everytime I come to purchase neverwinter nights 2 it won't let me, and brings the following error message up; 'There was an error in the App Store. Please try again later (100). It is later, days later, and still nothing is working. Help!?!
Thanks

Try here > Mac App Store: "An unknown error occurred (100)" when purchasing

"Unable to verify the name or password of the account" (Twitter account Mountain Lion OSX)

I recently installed Mountain Lion OS X (10.8 actually) and have been trying to configure my Twitter account to integrate it on my iMac, the problem is that when I type my Username and Password it won't let me add the specified account, it always appears the following message below the Username/Password fields: "Unable to verify the name or password of the account".
I know it may be that I type wrong my password or username, but I have checked and double-checked both password and Username and STILL get this message it has become rather annoying what does it mean? Do I have a problem with my privacy settings, firewall or something?...any help I would really aprecciate it,
Thanks in advance!

Have this issue as well, any info on fix?

How to return the name (or ID) of the Task FLow in Script

Sitaution; two task flows created which can be accessed via Tools > TaskFlows within FDQM
Task Flow "1.1 Multi Load - Import" --> Should run Batch Process Up to Import (enmBatchProcessLevel: 2)
Task Flow "2.1 Multi Load - Import Up To Validate" --> Should run Batch Process Up to Validate (enmBatchProcessLevel: 4)
I have developed one generic script which I would like to use for each task flow.
Only the enmBatchProcessLevel differs between the task flows and therefore I would like to parse this enmBatchProcessLevel as a parameter my generic script.
To be able to do this, the script needs to know on which task flow a user has clicked. So, I am looking for a function or statement which returns the name (or ID) of the task flow. Based on this name (or ID) a conditional statement can be performed in which a variable is dynamically filled. This variable can then be parsed as a parameter to my generic script.
For instance:
Sub GenericRoutine
     Dim strTaskFlow
     Dim intBatchProcessLevel
     '--Get the Task Flow Name
     strTaskFlow = ......<How to return the TaskFlow name or ID?>
     '--Validate the task flow and fill variable intBatchProcessLevel dynamically
     Select Case strTaskFlow
          Case "1.1 Multi Load - Import"
               intBatchProcessLevel = 2
          Case "2.1 Multi Load - Import Up To Validate"
               intBatchProcessLevel = 4
     End Select
     '--Execute generic script
     '--Call Batch script and parse intBatchProcessLevel as a parameter:
     Call sBatchProcess(intBatchProcessLevel)
     '--Execute generic script
End Sub
Sub sBatchProcess(Byval intBatchProcessLevel)
     Dim lngProcessLevel
     Dim strDelimiter
     Dim blnAutoMapCorrect
     '--Use intBatchProcessLevel to fill lngProcessLevel
     lngProcessLevel = intBatchProcessLevel
     strDelimiter = "_"
     blnAutoMapCorrect = 0
     Set BATCHENG.PcolFiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter))
     BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
End Sub
Edited by: user13642656 on Jul 21, 2011 4:55 AM

Hi, thanks for your reply.
The Generic script contains 600+ records, which I would like to maintain once, when having multiple Task Flows for Import, UpToValidate, ValidateOnly, UpToExport, ExportOnly etc.
Is there a central storage in FDQM workbench for script, like a "Module" in Excel VisualBasic environment? Thanks!

I wish to modify the name of one of the field name in the sales order.

HELLO GURRRUS,
i wish to modify teh name of one of the field name in the sales ordder.
what is the procdure,path and steps involved in that.it would be of great help of me if u take some time and suggest me.
bye take care hav a happy and peaceful life

Hi Sameer,
If you want to change the name or description of the field in the Sales order,
you have to use the userexit MV45AFZZ and use the Form USEREXIT_FIELD_MODIFICATION.
Get the help of the ABAPer and decide where do you want to make the change in the Header or the Line items. Accordingly give the requirements to the ABAPer.
He will do it.
Thanks
Augustine Ponraj

Possible to change the name "CurrentVersion.fcpproject" in the Finder ?

All the projects are saved as "CurrentVersion.fcpproject". For backup purposes, I have changed the name in the Finder to "MyProject1.fcpproject" and it seems to work. Anyone has had unwanted consequences to such an operation ?

My problem is that I want to do quick backups of all my projects : the render files included in the project folders are large and take a lot of time to copy.
FCPX has unstable "CurrentVersion.fcpproject" : daily backups are necessary, otherweise you can loose many days of work (which already happened to me). The reder files can always be remade, unlike the project file.
Any other idea about professional backup policy ?

I got tis ipad 4g from ireland recently and i brought it to india with me and i got tis micro sim from a local service provider and it was activated 3 days later and show the name service provider at the top but no internet signal.pls help

Similar Messages

Maybe you are looking for