I had a data migration done from old iMac to new iMac, how do I use that file to find my old email contacts, Safari bookmarks, etc ?

I recently had a data migration from old iMac to new iMac 11.2
How do I use that data file to get old email contacts, Safari bookmarks, etc ?

FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

Similar Messages

I am about to upgrade my eMac to the latest iMac. What can I do to transfer PPC software so the iMac can use my data such as email contacts, safari bookmarks, etc.?

I am about to upgrade from my eMac to the latest iMac. The eMac has given up the ghost at 10 years of age.
I have a full backup of my eMac so could use old email and safari contact/bookmarks,etc.
What is simplest way to do this?
Will the iMac distinguish between old PPC software and new Intel if I try to do a migration from old to new?
Can I use a flash drive to copy and paste required items from old to new?
All advice gratefully received.

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
2. Screensavers written for the PowerPC System Preference add-ons
3. All Unsanity Haxies Browser and other plug-ins
4. Contextual Menu Items
5. Applications which specifically require the PowerPC G5 Kernel extensions
6. Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
1. Intel In Macs
2. Apple Guide to Universal Applications
3. MacInTouch List of Compatible Universal Binaries
4. MacInTouch List of Rosetta Compatible Applications
5. MacUpdate List of Intel-Compatible Software
6. Transferring data with Setup Assistant - Migration Assistant FAQ
7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake
      or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and
       registration screens, but do NOT migrate data over. Get to your
       desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
      Late 2008) - What to do if migration is unsuccessful;
b. MacBook Air - Migration Tips and Tricks;
c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
      wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Hi, I am using USB 8476s to communicate to a slave unit in LIN network using LabVIEW7.1. Can anyone tell me how i can send a header file plus 1 byte of data to the slave in a LIN network. or how do i use ldf file. i want to read responses from the slave

Hi, I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format.
And I have Lin Description File. Can you suggest me how to use ldf file.
I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank you

you may use the LDF Starter Kit to use LDF informations in your application
http://joule.ni.com/nidu/cds/view/p/id/665/lang/en

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

Hello Bethanygrace_m7,
Thank you for contacting Apple Support Communities. You can take a look at this article about transferring content from your old iPhone to a new one:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Here is another thread from the Communities about migrating data from an old iPhone to a new one:
Migrating data from old to new iPhone?: Apple Support Communities
https://discussions.apple.com/thread/2038778
Regards,
Jeff D.

Migrating info from old Macbook Pro to new Macbook Pro and old laptop loses charge midway and transferring stops. After recharging how do I get things going again?

Migrating info from old Macbook Pro to new Macbook Pro and original laptop loses charge midway thru. After charging again how do I get things going, do I start from the beginning?

Agreed. Don't even think about starting a long, disc-intensive process like that without both machines powered by AC.

I've had an Apple ID under an old email address. I have a new Apple ID under my current email. Is there a way to link or merge the two together? I don't remember the old password and that email address is no longer active.

I've had an Apple ID under an old email address. I have a new Apple ID under my current email. Is there a way to link or merge the two together? I don't remember the old password and that email address is no longer active. If I cannot link or merge the two, how can I activate the old ID on the new computer if that email account is no longer active?? Any advice would be great. Thanks in advance!!

You cannot merge accounts.
You need to sign into the old account on your computer.
iTunes Store: Retrieving and changing passwords (Apple ID)

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

How do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though

how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though

A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.

How do I trnsfer my data and applictions from old to new ipad, how to trnsfer my data and applictions from old to new ipad?

How do I trnsfer my data and applictions from old to new ipad, how to trnsfer my data and applictions from old to new ipad?

If you have been syncing your old iPad regularly with your computer you can sync the new iPad to the same computer and transfer your stuff easily that way.

How to migrate cc from old to new computer

how to migrate cc from present iMAC to new iMAC?

Just install the same way you did originally. Download/install the desktop application, sign in, install the subscription application(s). You are allowed to have two working installations so you can keep the original intact if you like. If you prefer not to then you should sign out of the old installation as a minimum.
Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Migrating desktop from old Windows XP Pro system to new laptop with Windows 7

I have been happily running Palm desktop software 4.2.0 w/ HotSync 6.0.1 for a long time on an old system with XP Pro. Now I need to move everything over to a new laptop that has Windows 7.
Bluetooth is available if I want it but don't know how to decide. I've been happy with the cradle that has the USB connection and charge power.
So my question is how to set up on the new machine while retaining all my data and information (contacts, appointments, bookmarks, etc.) that I have now.
Should I download new versions of software etc?
Any advice will be much appreciated!
Post relates to: Palm TX

Please look at this link: http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=53678
During the setup of Palm Desktop enter a username of 'test'. This way when you hotsync it will pull your data down to the PC.

During an aborted migration attempt from old Macbook Pro to new machine running Yosemite my recently installed apps and settings have been placed in a deleted user folder. How do I reinstate them?

During an aborted migration attempt from old Macbook Pro to a new machine running Yosemite my recently installed apps and settings have been placed in a deleted user folder. How do I reinstate them?

I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'

I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup

I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup

Once again, KP is correct, but I just want to add that if you don't see the backup in the drop down menu on the summary page of iTunes when you choose the restore from backup option, then the backup is unfortunately gone. If you backup your computer, the iPad backup should probably be in that computer backup. I use Time Machine with my MacBook Pro and can access backups from months ago.
On a side note, I also archive backups from time to time. If you right click on a backup name in iTunes>Edit>Preferences>Devices (Windows) or iTunes>Preferences>Devices (Mac) you can save that backup or archive it. It will be date and time stamped. I have no idea why I do this to the degree that I do it, but I probably have 12-14 iPad backups archived in iTunes.

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created?

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created? I tried exporting them, but it loses all info. Also, how do I move the quicktime movies from one iphoto library to another? They were exported as jpgs

Add both libraries to iPhoto Library Manager. Then select the events or albums that you want to copy from library A and drag them to library B in iPLM.
This video shows the process:
OT

I had a data migration done from old iMac to new iMac, how do I use that file to find my old email contacts, Safari bookmarks, etc ?

Similar Messages

Maybe you are looking for