I had a new hard drive and lost all my website info

HI
I have just had a new HD as my computer just had a spaz attack. I thought I had everything backed up but I am not sure if I have done my iWeb properly as I can't get the info. i have all my website published to a folder and I thought that this was how to keep it sfae but now on my new HD I open iweb and I don't know how to put it all back, if at all possible. It must all be somewhere and I have published to Mac. PPlease help me before I start redoing it.

Yes, it does. But if that folder to which you published is still available, then some of the resources (such as images and text-images) can be dragged & dropped to your second-attempt iWeb site.
Meanwhile, consider regularly backing up via the free "SuperDuper!". It can create a bootable clone from which you can temporarily boot after which you can try to fix your internal HD via Disk Utility. Plus you can recover individual files (such as iWeb's Domain) from that bootable clone.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

Similar Messages

  • Help.......I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS

    I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS.  In the collections i get the messageI then locate the file in the new drive :
    i locate the file and receive this message
    How can i get the Collection to redirect to the new location??   I have about  a LOT of missing pics in Collections. 
    Thank you!  Jamie

    Thank your for responding.......
    To clarify....I moved LIGHTROOM to a new hard drive....including 1) Working catalogs, 2) Working exports, and 3) Working Originals.  I now know i did not follow correct procedure for "moving a catalog".  I dragged  it to the new hard drive. Yikes!!
    (I was at Imaging last week and spoke to Julianne Kost, she recommended that i use the FIND link....but this gave me the same result as i am speaking about above.)
    To Clarify......The Collections are listed. The target path to the images did not change when i moved to the new hard drive.
    There is an exclamation point in the right hand corner of the images in each collection.  When i click on the exclamation mark i get the message....."“JK_120214_7782.NEF” could not be used because the original file could not be found. Would you like to locate it?"  I then locate the file IN THE NEW current DRIVE...at which time i click on it and i receive the message.....
    this file is associated with another photo in the catalog.... each file can only be associated with one photo.  Then if i choose to show in library....it points to the image in the FOLDER  tab...which is in fact where the image is located. 
    Up to this point, when i need one of these older collections i have had to recreate.  i have manually gone to the original.....in the FOLDER tab, found the image and added to the Collections again.  Then i go back and delete all the files with the ! ......a long and tedious task.  I was hoping there was an easier way to recreate my "collections".
    Initially i was going to just MOVE the entire library again ( the correct way) ....which i should've done i believe.  Now i have imported more jobs and have created additional collections , so i'd love to find a short cut!
    I hope this is a bit more clear!!
    Thank you.

  • Upgraded ops and hard drive and lost all my folders in thunderbird. How do I retrieve them?

    I was using windows xp and my computer was hacked so I had to get a new hard drive and I also upgraded to windows 7. After installing thunderbird I noticed that all of my folders were missing. I had folders specifically for emails from my bank, certain cites that included my passwords for those accounts, utility payment records and on and on. Now I can't even find where to make a personal folder for all of my new e-mails that I need to keep. I really want to retrieve my old folders and incorporate them into my thunderbird that I currently have downloaded on this new system.

    Your folders are on your old hard drive is my guess.Did you copy any of your data over when you got the new drive?

  • How do i move a catalog to an new hard drive and keep all of the processed info and collections

    Ive recently purchased a new external hard drive, and was wondering how to i move the files so that they retain my collections aswell as the processed info.?

    There are lots of advice available on the web. The link below is one such source that describes the procedures.
    Moving a Lightroom Catalog - Digital Photography School

  • HELP!!  I partitioned my hard drive and lost all of my pictures!!

    Arrrrrghhh!! I was an idiot and partitioned my HD and reinstalled Mac OS X only to find that I had forgotten to back up my pictures!! Does anyone know the best and most cost efficient software (FOR A MAC) to recover those files? Thanks.

    Try Data Rescue II…
    http://www.prosofteng.com/

  • New hard drive and now all my licenses on Adobe products have stopped working

    Dreamweaver and Photoshop affected, running 10.8.2

    Katy, In other odd license situations like this, Abode has required a phone call to work it out. As they should be aware of the Apple HD replacement programs and if you have the Adobe disks and/or serial numbers, I think you can walk through it with them on the phone.
    Your profile doesn't have the Geographic location field filled in so I having to make the provincial and possibly incorrect assumption that you are in N. America. If you're not, I don't know the Adobe options elsewhere.

  • I lost my hard drive and lost all my iTunes purchases, well now it keeps saying my computer is not authorized to make purchases. Help I'd like to get all my past purchases back and I want to know why I cannot make purchases now. I have money in my account

    I cannot make purchases, as well as it says my computer is not authorized to make purchases

    Open iTunes, select Authorize this computer from the Store menu.
    You may be able to recover from your iPod Touch with a third-party utility such as Phone to PC.

  • HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

    I recently had to replace my hard drive and lost my iTunes library.  When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

    Recover media from iPod
    See this post for options on moving your iPod data back to your computer.
    tt2

  • Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

    I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
    The meta data for each image is missing.
    I have over 2,000 images. I don't want to go back through each image and add meta data.
    Is there some way to move everything?

    No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
    Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

  • I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

    Greetings everyone
    as the title says, ive had to install a new hard drive  and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
    The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating  8500 music files individually!
    Thankyou for taking the time to read my post, any help will be greatly appreciated.

    Ah, my reply was based on the assumption that you had a default installation of iTunes.
    i.e you had all your music in the iTunes media folder inside your iTunes folder.
    If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
    This complicates you situation considerably.
    iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
    Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
    Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
    Step 1
    Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
    Now open the copy of iTunes Library.xml with WordPad.
    Look for lines starting:
    Location
    These contain the paths to tracks.
    You will need to use a find/replace to change the drive letter so that it is correct.
    Make sure that you include enough in the "find" so that you only change the right thing.
    Maybe /c:/ and replace with /d:/ or whatever.
    After that, tell iTunes to use the library on the old drive with a shift key start.
    Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
    Then use the method in the following article to rebuild your library;
    http://support.apple.com/kb/HT1451
    Unfortunately the date added will be today for all tracks.
    If iTunes works correctly after this, consolidate your library
    File>>Library>>Organize>>consolidate
    This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
    Check that iTunes works OK and then use the first method.
    Message was edited by: polydorus

  • I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark.

    I had to get a new hard drive and some of my pictures show up but when I go to click on them to open them there is a triangle with an exclamation mark. Did I loose those pictures or is there a problem with iphoto

    How about the most likely occurance - something incorrect about how the iPhoto library was transfered
    What version of iPhoto '11 (9.4.3 is the latest)?
    exactly how was your iPhoto library transfered to your new hard drive
    This indicates that there is a problem in the iPhoto database - a possible solution to try is Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
    Why did you get a new hard drive? What kind of backup do you have?
    LN

  • I've had a new hard drive installed and reloaded all my stuff via time capsule and now can't connect to the internet although it say Airport is connected. How can I fix this problem ?

    Just had a new hard drive for my iMac and reloaded all my stuff via time capsule, all works fine apart from Safari which won't connect to internet. Airport is connected but each time Safari comes back saying there is no connection....any help gratefully recieved.

    So you have the apple rotuer called a time capsule  and you have complete the frist time machine back up? but there is not internet access ?
    If so.
    Opem airport utiltiy on your Comptuer :
    What is the IP ? > if its 169.254.xx.xx > its a self assigned
    Try power cycling the Internet source  for up to 1 mintue and make sure all the lights  turn off.
    In Airport Utility Version 5.5.3 / 5.6.1
    Gi > Intenret > conncetiong sharing > Is it off  bridge mode change it to share a public Ip address
    In airport Utility  version 6.0/6.1
    Edit > network > rotuer mode : Should be DHCP and NAT unless you use PPPoE to conecnt to the internet then this is automatically invoked.

  • I purchased elements 9 for iMac as a paid download 10/23/2012, recently I had to replace my hard drive and lost the program. I had read that purchased downloads were available for three years but the link  with my past order information is no longer click

    I purchased elements 9 for iMac as a paid download 10/23/2015, recently I had to replace my computer's hard drive and lost elements. I had read that downloaded purchases would be available for 3 years but, when I click onto the serial number of that order it isn't active. By clicking onto the link it should take me to the site where I can re download the elements 9 but, it doesn't do anything.  Unfortunately calling Adobe did not help, they will not address any elements questions over the phone, there's a recording directing all elements questions to this forum.  Any suggestions would be greatly appreciated.  Thank you.       Diana

    Try here:
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

  • My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to d

    My HP computer's hard drive crashed.  I have replaced the hard drive and reinstalled all of the software.  I have copied my I tunes library from my backup hard drive to the new one.  How do I restore the permissions?  This is the 3 rd time I have had to do this.  THe share screen says you are limited to 5 ??

    No backup is not good.
    You can transfer itunes purchases from an ipod.  File>Transfer Purchases

  • I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

Maybe you are looking for