I had a problem with connection with wireless printer, I had to delete. But I cannot install back. Printer HP officejet 6700

Please anybody can help me with installation of HP officejet 6700 on MacBook Air.
It stopped working, I could not find printer to connect, therefore I had to delete but I cannot install back again.

So the printer is no longer shown in the System Preferences > Print & Scan window? If you haven't already, you can power the printer off and on, then try to set up the wireless connection again and see if MBA recognizes the printer.
You'll need to provide us with more info so we can try to help.

Similar Messages

Problem with Wireless Printing on Officejet 6500

I just bought an HP Officejet 6500 E709n and it will not print wirelessly.

Please read this post then provide some details. What operating system? What error messages?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Connection problems with wireless printer

Unable to connect my hp officejet wireless printer to my computer now.

What is your Cisco / Linksys home device? What steps have you undertaken to troubleshoot the issue? What errors have you encountered?
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Problems with wireless printing to an HP-3845

This HP-3845 printer works when connected directly to our PC (XP w/SP2) and Acer laptop with VISTA. When it is connected to our Apple Airport Extreme, you can print from the PC (Ethernet wired)with no problem, but you cannot print wirelessly from the laptop. Sometimes on the laptop, when a Word document is selected, it seems to either not print, or print several hours later. When you print a "Test Page" from the LT printer control panel, it will usually start to print immediately, but will hang-up at the end of the text, and not eject the page. I have read a lot of the threads and went to tech.ifekix.net for a new driver, but could not find one. Is this printer supported by the airport extreem?

differnet problems (i occasionally get gibberish or PS errors), but seems to have correlated w installing 10.5.2

Problem with wireless printer HP photosmart by using iPad

How can I use my wireless printer HP photosmart D 7460 with my iPad?
jacques

I don't see your printer on the list of AirPrint capable printers: http://support.apple.com/kb/ht4356. If it isn't AirPrint capapble, the options are as follows:
HP may have an app in the App store that will allow your printer to have limited capabilities (not AirPrint).
One or more of the 3rd party printer apps in the Apps Store may work with your printer (again not AirPrint).
Download a 3rd party program to your PC/MAC that will allow you to use shared printers as if they were AirPrint capable. Your iPad will see the printer as an AirPrint cabable printer, but the PC/MAC the software is installed on must be up and running. A few such programs are Printopia, AirPrint Activator, FingerPrint by Collobos.

HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED

My printer displays error message - opening raster file failed. Has anyone had this happen?

Lightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Problems with wireless printer set up for Macbook Air and iMac

I'm not having success in setting up my Macbook Air (2012 ML version) and iMac wirelessly to a new Epson 837 printer. I've tried darn near everything and am coming to the conclusion that perhaps it's a router issue. Are there known issues with the Netgear N600? It's supposed to be Airprint compatible but yet my ipad and iphone doesn't recongnize either.
Any thoughts would be appreciated!

Yup, and since all your devices can probably access the Internet and other services over the router, you may want to study the printer's manual or use other Epson resources to figure out why that thing can't be talked to.
Oh, did I mention that already...?

TS4009 HI I have a problem with my ipad, its locked ans says ' this ipad cannot be backed because there isnt enough storage avaulable, manage your storage in stting' when I click on setting, it wont work. it has been jambed on this screen all day.

i have increased my storage too

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.

When I updated to 10.4.10, had problems with wireless. Able to fix problem

I have a mac mini G4 since Sep 06. I had no problems with wireless until I updated to 10.4.10. My problem was I could only connect to the internet for about 10 minutes then it would not respond. I had to turn off airport then turn it back on then it would work for about 10 more minutes. I have AT&T DSL, speed stream 4100 modem, and D Link 524 router. I went to D Link web site and found out when I use encryption WEP,WPA,ETC. it has to be hexadecimal key with dollar sign ($) before the hex key (Apple computers only). Before the update, I only used password with no problems for about 9 months. Instead of using a password use 64 bit encryption its 10 hexadecimal key or 128 bit encryption its 26 hexadecimal key. Valid hexadecimal characters are 0-9 and A-F. Example of 64 bit key is $0123456789 instead of password. After I did this, I been on the internet for hours with no problems. I hope this info can help out.

Take a look through some of the other threads in this forum. Almost 100% of Safari 3 trouble after the OS X 10.4.11 update is caused by third party plugins, extensions, and input managers. Check in these folders and report back what you have in them.
/Library/Internet Plug-Ins (this is the Library folder in the top level of your hard drive)
~/Library/Internet Plug-Ins (this is the Library folder located in your Home (username) folder)
/Library/Input Managers
~/Library/Input Managers
Or if you know that you have installed some third party stuff along the way try un-installing them. Again, read some of the other threads here to see who the main suspects are. Once you know what is causing your trouble then, if you still want to use the third party plug-in, go to a site like [Version Tracker|www.versiontracker.com] and look for updated versions that work with Safari 3.

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Problems with wireless internet on Imac

I have an IMAC since just over a year (MAC OS X vs. 10.6.6), and I have had over the last couple of months lots of problems with wireless connection.
Sometimes it connects without problem, but mostly I have to follow a 'Diagnostic Info' process: I select Airport, then select the wireless network, then have to restart, and then all lights turn green. I can connect then and only after a minute the pages do not load anymore.
Can anyone give me some troubleshooting tips ?

You could also have look at this thread: http://discussions.apple.com/thread.jspa?threadID=2790214&tstart=0
which has a couple of links I posted that may help troubleshoot your problem.
Rick's suggestion at looking at changing channels seems to be a good starting point.

Huge problems with wireless, would need some help

Sorry for the bad topic, and sorry for my english.
And now the problem.
I have just bought my first laptop, and got almost everything to play nice in arch, except the wireless.
My card is a Intel PRO/Wireless 3945ABG (iwl3945), and i have a Dlink 524 router (abg).
Using WAP, but can change this if its help.
Right now I'am using NetworkManager (0.6.5-3 from rep) and KNetworkManager (from AUR), and it works very very bad.
It can't connect at startup (or atleast it doesn't...), it takes several attempts to get a connection, it drops the connection and dont reconnect when it does, and so on. Its almost unusable and force me to use wired a connection just to be sure to be able to write this.
After what i read in different forums and mailinglists, there seems to be a lot of problems with wireless at the moment?
Anyone got this combination to work fine? Or are there any other way of configuration i should try? Suggestions?
Thanks in advance!

I've had a lot of problems with wireless networking for several weeks recently, ever since I upgraded vanilla kernel26 from v.2.6.22 to v.2.6.23 (see http://bbs.archlinux.org/viewtopic.php?id=40145). I'm using the Windows driver bcmwl5 for the Broadcom 4311 chipset via Ndiswrapper, and I'm using WPA-PSK (TKIP) encryption. I also use a D-Link DI-524 router. What finally cured the problem was to install the new wicd (v.1.3.1) network manager which is now in extra and to set up all networking interfaces in that GUI, abandoning using Arch network profiles and all the detailed setup in /etc/rc.conf.
My /etc/rc.conf now only contains (I'm only showing entries pertinent to networking)
MODULES=(ndiswrapper capability sg acpi-cpufreq cpufreq_ondemand cpufreq_performance cpufreq_powersave)
HOSTNAME="RFDellLT"
DAEMONS=(syslog-ng @nfslock @nfsd @netfs @crond !network hal cpufreq portmap wicd sshd cups alsa @openntpd privoxy)
i.e. no more INTERFACES, not even "lo", gateway, ROUTES, NET_Profiles. Everything is set up through wicd. You only need to put the wicd daemon in the DAEMONS array (after hal which also loads dbus), and the network daemon isn't needed anymore. Also you should uninstall any other networkmanager.
To put the wicd icon in the system tray, create a shell script (give it any name) in the .kde/Autostart/ directory in your home directory (if you use KDE, otherwise do the equivalent thing for any other DE/WM) that contains the command /usr/lib/wicd/tray.py.
You may want to try wicd, perhaps it'll fix your problem. It certainly has gotten good press in this forum.

New 4s connects with bluetooth in my Lexus, but I have intermittent problems with calls. I can hear them, but they can't hear me. Never did this with 3gs. Anyone else have this problem?

New 4s connected to my Lexus bluetooth. Having intermittent problem with calls. I can hear them, but they can't hear me. Never a problem with 3gs phone. Anyone else having this problem?

I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

I had a problem with connection with wireless printer, I had to delete. But I cannot install back. Printer HP officejet 6700

Similar Messages

Maybe you are looking for