I had an Ipod 5th Gen that died.....it fit my Bose Sounddock perfectly. Now I have an Ipod Nano,16GB....What kind of adapter do I have to buy to play the Nano through the Sounddock????

I had an Ipod 5th Gen. that died.....it fit my Bose Sounddock perfectly. Now I have an Ipod Nano (16GB).
What kind of adapter do I have to buy to play the Nano throught the Sounddock again?

this it?

Similar Messages

I had to reformat my MacBook Pro and I cant find iPhoto any places, do i have to buy it in the appstore now??

My MacBook had to be reformat and everything on the mac disappeared, including Iphoto.
Since Iphoto was on the computer when i bought it i cant understand why. so my cuestion is do i now have to
but Iphoto in appstore or can i find it somewear ? thank you for helping

You should be able to restore the iLife apps, see this support article:
From Accept iLife: OS X: About OS X Recovery
If you erase install OS X Lion or OS X Mountain Lion on a new Mac that shipped with OS X Lion or OS X Mountain Lion installed, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start (up) from OS X.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll?

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll, the applications can be redownloaded and she had no music. Is there any known bug about ipods locking on their own because no one seemed to have tried to bypass the 4 digit code and it is locked for 26 million minutes.So thank you if anyone has any information or help for us.

Your friend may have placed the ipod next to an object that repeatedly pressed the screen. Under certain circumstances this can lead to what appears to the iTouch to be failed attempts to access the system. After repeated failed attempts, the Touch increases the waiting time required for the password and may ultimately lock in the way you describe.
It's been a while since this was posted, but this might be informative to someone else who finds themself in a similar predicament.

I downloaded 2 cds onto my ipod nano through itunes. Recently my itunes account changed and now it doesn't recognize the songs from the cds. How to transfer from ipod back to itunes? I don't have the cds anymore.

I downloaded 2 cds onto my ipod nano through itunes. Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds. The songs are still on my ipod. I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore. How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them?

What you have on your computer is your iTunes library, not your "account." The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store. If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
How are they not "recognized"? Are the songs still listed in your iTunes music library, but grayed out? They no longer appear in your iTunes library at all?
If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files?

I have an old Ipod 5th gen that I have been using for downloading music from my library. Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod. How can I get that option back on my old ipod?

I have an old Ipod 5th gen that I have been using for downloading music from my library. Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod. How can I get that option back on my old ipod?

- iTunes purchases by maybe
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you need a third-party program like one of those discussed here:
newer copy
BTW, this is the iPod touch forum.

If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
They are not listed as devices on the itunes store account...

Hi BradSLane,
Thanks for using Apple Support Communities. This article has one method to find your serial number:
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
Go to My Support Profile*.
Sign in with your Apple ID.
View your purchases in "My Products".
* Currently available only in certain languages.
Note: If you need help remembering your Apple ID(s), go here.
Take care,
- Ari

How retrieve my songs in my ipod touch 5th gen that itunes have deleted. Half of my songs was deleted and i dont know what to do.

How retrieve my songs in my ipod touch 5th gen that itunes have deleted. Half of my songs was deleted and i dont know what to do.

You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music you will have to get them from where you originally got them

HT201365 how do i unlock a ipod 5th gen that has activation on it and i got it with a broken screen and repaired in now it asks for a icloud sign in

how do i unlock a ipod 5th gen that has activation on it and i got it with a broken screen and repaired in now it asks for a icloud sign in

There's no way around activation lock. If you purchased this from someone else you'll have to contact them and have them remove it from their account as explained here: http://support.apple.com/kb/TS4515. Otherwise you won't be able to use it.

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

No. You can turn your 6G Nano in to be recycled at your local Apple Store for a 10% discount towards the purchase of a new one. Otherwise, your only other option would be to sell the iPod on Craigslist or eBay and use the proceeds from the sale towards the purchase of the new 7G nano.
B-rock

I have a 5th gen that won't display any video out

I have a 5th gen that won't display any video out. I've tried 2 different splitter cables out of the earphone jack. I've tried plugging the RCA cables into different colors on the tv. Thought it was just a problem with the cables until tonight when I got a Sonic Impact V55. Video won't display on it either. I have the TV setting to ask. After it asks and I say yes, I get a picture of an Ipod cable connector and a message saying: TV OUT
ENABLED Please Connect Video Accessory.
This message happens on both splitter cables and using the dock connection on the V55. I've restored, reset, nothing has helped.
I did see a couple of posts regarding the V55 and whether the 5th gen would work on it. Does anyone have a v55 that the ipods working with? Heck the box says it works with Ipod 5th gen.

Playercoca wrote:
The video out on an iPod does not go trough the earphonesjack.
It goes trough the place where you put youre dock conector in (on the bottom)
Yes it does, on the 5th generation (pre-Classic) models, the video does indeed feed out the headphone jack (as well as out the dock connector on the bottom).
Patrick

Playing ipod nano through home sound system

I want to play my ipod (nano) through my panasonic dvd player + sound system. Ive tried heaps of leads into every plug socket in the dvd player, but no tunes!
What type of lead do i need?
Where do i plug it into in the player??
Do i just press play to start playing?
Chukka
ipod new nano Windows 2000

Just to expand on what Chris said.
The phono inputs of a stereo amp are designed to accept the inputs of a moving magnet (or sometimes a moving coil) phono cartridge on a turntable. These are low output devices and so the phono input is engineered to amplify the signal.
A line level output such as the iPod doesn't need such amplification and so, if you connect the iPod to the phono input of your stereo you will overload that input. The sound will be distorted and in many instances may cause damage to the speakers. The phono input is for turntables only. Connect the iPod to a line level input as previously mentioned.
The reason you will get a better sound from the iPod when connected to a stereo and using the line out port from the dock (and not the headphone jack on the iPod itself), is that the headhpone socket is powered by a low quality amp. It's meant to drive an easy load like headphones and not the input of a stereo.

TS1389 I have had two previous work MacBooks that died and both were authorized, however, now I can't reauthorize my new laptop. Any suggestions?

I have had two previous work MacBooks that died and both were authorized, however, now I can't reauthorize my new laptop because I have reached my limit of 5 systems authorized when technically, I only have 3 authorized. Any suggestions?

Deauthorize all, then authorize the active computers.

I have had my ipod nano for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?

I have had my ipod nano 7th gen. for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?

Or make an appointment at the Genius Bar of an Apple store
Apple Retail Store - Genius Bar

I had my Ipod nano 7Gen factory restored. Nano touch is working smooth without any song init but after i have any of the songs shifted from itune touch buttons get messed up. They don't work. Help me in over coming this issue

I had my Ipod nano 7th Gen factory restored. Nano touch works smooth without any song in-it but after i have any of the songs shifted from itunes, touch buttons get messed up. They don't work. Help me in over coming this issue.

Hello Rohantm,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) touch screen. I recommend the following steps for the issue you described (you can skip the steps you have already tried):
Touch screen does not accept input
Clean the screen with a microfiber polishing cloth.
Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
Sync with iTunes and restore the iPod.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Find the full article here:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Thank you for using Apple Support Communities.
Best,
Sheila M.

I had an Ipod 5th Gen that died.....it fit my Bose Sounddock perfectly. Now I have an Ipod Nano,16GB....What kind of adapter do I have to buy to play the Nano through the Sounddock????

Similar Messages

Maybe you are looking for