I had backed up my music files, and then my hard disk died and was replaced. I replaced the files on the new drive, but get the Itunes message that I don't have proper authorization to open my own files.
"Need proper authorization" to have ITunes acknowledge my own music files which have been reintroduced on a new hard drive from a back up hard drive.
Hello there, PE James.
The following Knowledge Bsae article offers up some great recommendations for troubleshooting permissions issues with iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
A Web site that I used to go to via Firefox I must now access using Internet Explorer. I can get to the site's home page, but when I try to sign in it says that I don't have 'proper authorization'. I contacted the site and their rep say that I must make it a trusted site in Firefox, but I can find no option to do that.
Can you tell me how to solve the problem? I would much rather use Firefox.
Thank you.
FranGSA Web site that I used to go to via Firefox I must now access using Internet Explorer. I can get to the site's home page, but when I try to sign in it says that I don't have 'proper authorization'. I contacted the site and their rep say that I must make it a trusted site in Firefox, but I can find no option to do that.
Can you tell me how to solve the problem? I would much rather use Firefox.
Thank you.
FranGS -
I'm trying to rip a CD to iTunes and am getting an error message that I don't have privileges to make changes to the song. Suggestions on how to fix the problem?
Hey mprangle,
Thanks for the question. The following resources may help to resolve your issue:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
How can I delete files that are waiting to be downloaded? I no longer want them and they won't all fit.
If downalods won't fit on yrou computer, ou should clear up your drive by removing unsed programs and documents.
As a general rule, you should keep 10%-15% free drive space on your boot drive. -
I discovered that when I restored my harddrive a few weeks back, not all of my music in iTunes was restored. Now when I go back to an earlier date in my Time Capsule, I get a message that I don't have permissiom to see the files. What do I need to do to access these files?
Pondini might have some help for you..
I think it depends how you restored.
http://pondini.org/TM/E10.html
http://pondini.org/TM/15.html
Look at 14-17 of FAQ.. of which I have only selected 15. -
My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again? I have CD's on my phone that i no longer have the physical copies of so i can't just re-download them all, plus it would take forever! I just want to know if there is a way to get all of what is still on my phone, back over to my iMac with it's new drive and restore my full iTunes library to the iMac with playlists, CD downloaded music, and my iTunes bought stuff, so i can go back to synching the 2 devices without losing everything that's on my phone that used to be on both devices?
iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music -
I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result
What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues -
I cannot play music from my itunes library. I keep getting an itunes message that says, “The song could not be used because the original file could not be found.” Is there a fix for this? Has this happened to anyone else? Is there a fix for this? Thank you.
Hello Turintest2,
I am having a similar problem. I have over 4000 songs giving me this error. I certainily don't want to go in one by one and find them. I know you wrote a script for Windows but I am a Mac user. Is there a fix for me? Here is the info on where the song is currently (used by doing the get info)
Here's a shot of my preferences:
Just FYI, I know that apparently iTunes is looking for this music in the trash. However, if I go here:
Then I find the music there as well. (Which is where it is in my preferences.)
Please help! I don't want to have to go through over 4000 songs and update them one by one. -
Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanksget an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks
First of all, are you using the OS native screen capture?
If not, make sure the application you're using has been update for Lion. I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier. -
My iphone does not connect to my email provider and fetch my email. I have been getting emall ok previously, this occurred when I changed my password on my email account. I have "set up a new account" but get the message "server is unavailable". I have tried several things but to no avail. Does anyone have the solution?
ThanksDid you ever fix this problem? The same thing happened when I just changed my kids passwords and now can't access their mail on their iPods or my iPad but I use the same email provider and mine is fine however I did not change my password. If you fixed it how did you?
-
Why am I constantly getting the message that I don't have enough storage space? I have upgraded to the 50GB storage plan and I am still getting the message. Help?
That message refers to storage on your iPhone, not cloud storage. You will need to move content off your phone to make more space.
-
I have a 2007 Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad and no longer supported. He removed the hard drive and told me to buy a "sled" to retreive the data. Is it worth trying to fix it so that I don't have to buy a new one? Where should I take it? Thanks.
djgornik,
if the Genius is correct and the logic board is bad, then replacing the logic board would be fairly expensive. What problems are you seeing with your MacBook Pro that caused you to visit the Genius in the first place? Whether it’s worth trying to fix it or not depends on your particular circumstances, such as your willingness to trade time for money in pursuing repair vs. replacement. -
I went to print, PDF and then fax PDF. But got a message that I don't have an internal fax. Is there something I need to buy and install?
You need an external USB modem in order to fax. There is no fax modem built-in. This should work.
-
I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with. It suggests I have the ability to view, but that my drivers might be disabled. I don't know how to check to see what graphic drivers my macbook (end of 2008 model) have enable. Can someone help?
You don't need to care about graphic driver on Mac OSX. It includes in OSX and run the driver your MacBook need.
Maybe you are looking for
-
Is the 12W charger compatible with ipad mini? will it damage my ipad or the battery?
the 5v charger which came with the ipad mini is charging too slow... am just wondering if the 12w charger can be used to charge my ipad mini? will it damage the ipad mini itself or the battery?
-
Is there a way to change the ThreadPoolSize of Weblogic 6.1?
-
Hello all, I would like to ask, whether it is possible to post invoice receipt to an purchase order/SD order via the tc FB01. I know the usuall way is via MIRO. I'he tried to post it via FB01 with the document type RE, I filled the field purchase ord
-
Java system error: call FM RSRD_X_PRODUCE_PROXY
Hi Gurus, When i tried to execute event data change process type in BI component I am getting below error. It clearly says missing password. I haven't understood what password is missing for which user. we checked all user certificates all valid. Bel
-
When the Database startup and open? please please not alert log
Hello all is there is a script or dinamic view which query what time the database startup and shutdown. please don't answer me with opent alert log, am looking for view or script only thank you regards