I had macbook pro and would like to install windows OS. Which window version is suitable 32bit or 64bit. And which window is common install in mac. Need helps
I had macbook pro and would like to install windows OS in it. I had install desktop parallel and need help which windows version is suitable. Windows vista, 7 or 8 and either 32 or 64 bit.
The answer is it depends on which model of MacBook Pro you have. This article has a table that shows you which versions of Windows you can install.
http://support.apple.com/kb/HT5634 (click 'MacBook Pro')
Similar Messages
-
Just bought a new MacBook Pro. Would like to transfer my Waves plugins from My old Hard Drive into my new MBP. Is there a simple way to do this?
Hi
The easiest and most reliable way would be to download the installer from Waves and re-install.
CCT -
I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago.
My Mac is just hanging and I am unable to shut it down or do anything at all. I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. TxIn order to resolve the issue if it occurs again, more info would be helpful as to what occurred prior to the "hang." One potential fix would be to try a Safe Boot:
After the Mac is completely shut down, push the power button and immediately after the startup tone, hold down the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
There should be a message that says "SafeBoot." After the Mac is completely booted, try restarting and see if the issue is gone. -
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!
I have a MacBook Pro and not able to connect to Internet. I have other HP comp and iPad and am able to connect. I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection. Any suggestions? Thanks!
Call Apple Care back & tell them their suggestion did not work.
Solution may be found if you search in the "More Like This" section over in the right column. -
Dented my Macbook Pro and now it won't start up. Please Help!
Hello. I have searched and searched and cannot find a solution.
Last night I was putting the finishing touches on my dissertation and accidentally dropped a tape dispenser on my 1-year-old MacBook Pro - it hit just to the left of the trackpad and left a nice little dent! After the "incident", I was attempting to pull up Word and the machine completely froze. I turned Mr. Mac off by holding down the power button and when I tried to restart, I never got past the Apple logo with the little spinning circle. After trying many times to restart, I made it to my desktop only twice, and after the dock appeared (with no menu bar above or desktop icons), the machine froze again. Each time, I heard the hard drive working until the big freeze.
I was able to boot off of the Leopard install disc and ran "repair disk" on my hard drive - no errors were found. Tried restarting again and got nothing. I have since tried restarting with various key combinations and the machine only responded to "C" and "Option".
This morning, I searched again and decided to try the "optioncommand+pr" to reset the PRAM as suggested to another damsel in distress with a similar issue. Now, when I try to restart, I get the gray screen followed by the chime, and then nothing - no hard drive working, no Apple logo, no spinning circle, nothing. My install CD will not spin and I none of the start-up key combinations work. It just sits there staring at me with that gray screen - laughing because my dissertation is in there somewhere and I can't get it out! Yes, I have backed my maching up on a 500G external hard drive, so I haven't lost much - but I can't access my hard drive without Mr. Mac! And I am a lonely Mac owner here - no others to borrow!
I am going to an Apple Store on Saturday, but I thought I would give you guys a chance to save my life first. Any suggestions for this girl and her Mac would be great! I am defending my dissertation next week and I'm about one small crisis from a major meltdown!!!!!!
Thanks!Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti.... -
Just installed 10.6.3 on MacBook Pro and external disks cannot be seen by OS. Help
i installed 10.6.3 on my 17" MacBook Pro (updating from 10.5.8). All my external disk drives which had all been visible to the system and accessible before the update no longer were visible to the OS. Not in the sidebar and not in the disk utility. After checking all connections etc. many reboots, resetting the pram i still am unable to see or access these disks.
From there i updated to 10.6.8 but exactly the same results. i'm not sure where to go from here. i have 4 externals on 2 different usb routers and 1 external on a firewire router.
I'm considering removing the routers and trying each drive separately and directly connected to the laptop.
And of course, i'm short of time.
Anyone with similar problems and/or solutions?You mean USB HUBs, correct? Not routers.
Yes remove the HUBs and try the drives connected directly to the computer. -
So I have a macbook pro and i was trying to download the software need to operate ichat on fb?
Help please, I have been trying to download fb ichat softwae needed but cant figure out how since it wont allow me to.. Help please
So i will download the software sort when i go through facebook but then it wont let me run the software to have it installed on my computer
-
guys i need help please
How do u get points
You can get points when you answer peoples questions. The person asking the question awards the points as they deem appropriate. You can't awared points to yourself. Points aren't worth anything. -
On my old ipod I had a different user id and pass word. I would like be able to transfer all my music to my macbook pro and iPod. How do i do that?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
-
I am currently managing 20 iPads on a macbook. I would like to manage the same 20 iPads on a new macbook pro. I have logged into the iTunes account on the new machine and see our apps but not the devices. How do i get the devices to be shown on new comp?
Has anyone used apple cpnfigurator for this purpose?
-
I would like to buy a Macbook Pro and it would be my first Mac device. I have selected this model MGX82HN/A MB PRO DUAL CORE i5 2.6GHZ/8 GB RAM/256 GB SSD/ Iris Graphics device. Please advice whether it would suffice a normal user who works in a management consulting industry with project presentation related software in work ? Thanks.
Saptarshii wrote:
instead of buying an Apple USB superdrive, is it safe to use third party usb optical drive ?
Not only would it be safe but less expensive as well. The tray loaders are deemed to be the most reliable. Apple does not support Blueray so avoid that.
Ciao.
Maybe you are looking for
-
Reinstalled Lion 10.7.4, now intermittent startup
I installed a new drive on my Mac Pro 1,1. TechTools Computer Check checked out, including surface scan. I reinstalled Lion 10.7.4 from the Apple Store, as directed, and checked for Software Updates several times. I reinstalled Safari 6. (Because I c
-
How do configure my ipad to a printer
i have just bought a new printer and cannot configure it.
-
All, I have a new HP Envy 20 computer with windows 8.1 I have a 30+ year old Lazer jet 4 printer that is the best computer device ever invented. (thanks HP) At first it worked just fine. Then one of 3 things happened: I went from Windows 8 to Windo
-
Hi all, Other than this one bug, the E5-00 is awesome! BUT: No matter what alarm sound I set, it is always VERY loud! I can hear it 2 rooms across... Even if I manually edit an mp3 file for it to be a lower volume, my E5-00 automatically makes it the
-
Warehouse multiple staging area define
hi this is the scenario what we have in production we have multiple subassemblies which takes place for the final product , e.g. finished Part 1 -- has 2 subassemblies say subass A and sub *** B , for Sub *** A we have 2 materials C and D requiremnts