I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct
I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct
Is your phone still signed in with your old iTues ID for iCloud (in Settings>iCloud)?
Similar Messages
-
For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?
Setesh, See if both computer has the same version of iTunes, if both are the same, then it is your PC, that has plug-ins which is in conflict it iTunes. ( normally it is the Antivirus or some plug-ins to beautify your screen)
If it is different, most likely the other PC has an older version of iTunes, so you should downgrade your iTunes to that older version, which your iPod interface well with.
Other probable causes,
you are using the USB 1.1 port at the front of your PC, and not the USB2,0 port at the back of your PC. so switch to the back.
Dont use any other USB devices, when you are syncing the iPod.
Dont use any USH Hub.
Have a nice day! -
The question says it all!
Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).
* Make Link - https://addons.mozilla.org/firefox/addon/make-link/ -
Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com. -
My hard drive failed so I sent it off to get recovered. How can I get my music back that I purchased from my old iTunes account?
See Downloading past purchases from the App Store, iBookstore, and iTunes Store
-
How can I check to see if there is money left on an iTunes gift card if I can't read the scratch off code?
Sorry, but other than trying to redeem the card there's no way to check whether it is still valid or was previously redeemed.
Regards. -
I've can not from the apple store. I cheched my visa account it still have money in it and the bank told me is working but I still can't buy stuff from the store . Why?
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
iTunes Store: Accepted forms of payment
http://support.apple.com/kb/HT5552 -
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i had a mobileme account, it seems to have continued into a cloud account. how can i terminate this account?
You can't teminate an iCloud account; just stop using it and ignore it - it's not costing you anything.
-
Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue
Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
I have updated both my iphone 4G and my husbands 4G with the nAew 5 update but now have his contacts on my phone and everytime he downloads an app it goes on my phone. How can I change this? Do I have to have two separate Apple ID's
Try this
http://support.apple.com/kb/ht1495
Hope it helps. -
How can I repair my IPod n still have all my information in it or can i get a new one but still with all my information for how much
- Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Apple does not transfer any data.
Apple - iPod Repair price
- To backup all your data to computer follow the instructions here. However, do not restore from backup until you have the replacement/repaired iPod. -
I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme
No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking. -
I have Keynote on my iMac and iPad. I created a presentation on my iMac...now I want to move it to my iPad for presenting. How can I do this. (I do have Lion.)
Goto bottom of scren in iTunes there is a section called sharing when it is connected to your computer. The sharing section lists those apps where data/files can be directly imported via syncing. Click on the app you want to transfer and then add the file.
Maybe you are looking for
-
Inventory Module Upgrade from 11i to R12 - How to Copy Inventory Orgs.
Hi All, We are working on R12 Upgrade project for Item Conversion. Requirement is to upgrade and bring all the Item setup and data from 11i to R12. As part of setup requirement, there are around 1900 Inventory Orgs in 11i instance. Please let me know
-
That little cord that hooks up to an adapter (I can still find that) so I can recharge my Ipod Mini and also allows me to transfer tunes from my computer to my Ipod Mini is lost somewhere in my 3 BR, 2 and 1/2 bath house. I thought, Jesus, I can just
-
'session' is undefined - javascript error in my JSF/JSP page
I have the following JSF/JSP page. In onLoad() I invoke a javascript function func(). In this method, I attempt to lookup an attribute from the Http Session. When I run my application, my page is loaded with but the icon on the lower left corner of t
-
We are running GroupWise 7.0.3 hp3 webaccess. When a any user logs into webaccess they get this error. Failed to get user type: response was empty If they click OK they can still get in and seems to be functioning correctly. Any ideas what would caus
-
Write teststand globals from labview
Hi all, i just started using teststand and i am not too familiar with the program up to now. What I want to do is, writing teststand station globals from a vi that i started asynchronously. What steps do i need to execute in teststand before starting