I had restore my nano and the language ended up chinese or something similar - need to change to english
I had restore my nano and the language ended up chinese or something similar - need to change to english
iPod Manuals
Similar Messages
-
I try to open apple store on iphone and the language is in chinese how do you change back to english
I bought an iphone 3 and when I tried to log in into apple store the language is in chinese how can I change the language into english
You haven't mentioned if the iPhone is in Chinese or just the Region Format.
I'll try to help the as if the navigation is being done in Chinese. Usually you need access to another device so you can navigate in a language that you understand.
Go to Settings>General. If the iPhone is still in Chinese, you can still navigate to two just by following the settings icon.
Scroll all the way to the bottom. The bar standing alone at the bottom is "Reset," avoid that. Look at the group of topics just above the reset bar. The second from the bottom is "Intrernational." tap that.
There are two groups of topics, three above and two below. Focus on the two below and select the top one of those two.
Again, if the iPhone is in a laguage you cannot read, you may need to do some experimentation. You're looking for the words "United States," but you may need to settle for anything that uses a character set that you understand. Select ity and you you be able to navigate the rest. -
Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?
Either redownload them directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
or sync them to your iPod via iTunes
iTunes: Syncing media content to iOS devices and iPod -
I restored my ipod and the one cord that i was using got confused and thought my ipod was someone elses, and now i cant restore all my stuff that it had on before.
First of all, did you back up your iPod before you restored it? If you did, then when you restored it, you either set it up from the wrong backup or you set it up as a new iPod, but didn't go through all the steps, so it displays it as another device. Re-restore it from the backup you had before (assuming you made one)
-
HT2371 What do you do if your iPod locks and the language is still something you can read?
What do you do if your iPod locks and the language is still something you can't understand?
Maybe:
iOS: How to change the language when it's set to one you don't understand
Next:
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT201407 I had restored my iPhone and it wont activate.
hey i had restored my iphone and it wont activate. i tryed to restart it and still nothing says unavalble to connent to actovation sever.
Activation issues are typically the result of a device that has been hacked or jailbroken to unlock.
If this is the case, no assistance can be provided here. -
How do I back up the music and apps etc. I restored my computer and I reinstalled iTunes, I was told something about a terminal command line, what does that mean? Please help
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer any other music by using a third-party program like one of those discussed here:
Copy music
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup. The restore will also update the iOS.
Note that the backup that iTunes makes does not include synced media like apps and music
Are you sure you have a 3G iPod? A 1G iPod can only go to iOS 3.1.3
See:
Identifying iPod models -
okay, so i put my ipod in DFU mode to restore it. well now it is in the middle of restoring ipod software and the bar hasnt moved. what do i do?
- Cancel the restore. Force close iTunes if necessary. Disconnect the iPod and reboot the computer and try again.
- Next try on another computer
- Make an appointment at the Genius Bar of an Apple store. -
I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!
The built in camera app. But all the apps do not allow me to save any photos as well.
-
I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother and even when I download an app that doesn't require my iPod to be an iOs 4.3, it will download, but it won't open.
Did you check your security software settings to be able to restore? iTunes for Windows: Troubleshooting security software issues
-
After updating to Firefox 5.0.1 and trying to open Firefox, it opens two tabs. One is the restore session tab and the other is the Firefox home tab. Nothing opens in the session restore tab and once the Firefox home tab loads the browser screen freezes with no crash ID's listed. The only way to get out is thru the task manager and ending the process. Firefox worked fine before updating.
Hi glivezey,
Try typing ''about:home'' into the address bar. Is that the page you are looking for? If so, go to ''Tools > Options > General'' and save it as your homepage. If that home page doesn't show up the next time you start Firefox, you should look at [[Preferences are not saved]].
Hopefully this helps! -
i restored my iphone and the bottom of the screen desnt work so i cant click agree. Is there another way?
There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
Best of luck. -
I have an Ipod nano and the screen is just white and says ok to disconnect with a black tick on. Can anyone suggest what I can do?
Reset the Nano.
How to reset iPod
B-rock -
I have chosen the restore from iCloud and the phone has now restarted to complete the restore. It has been 3 hours and the progress bar has not moved. I have now tried to reload again by holding the sleep etc, to no avail
If all you want is your old photos, you could backup your new phone using iTunes, then restore it from your iCloud backup, import the old photos to your computer, then restore it from the backup your made in iTunes returning your newer data to your phone. If you want your old photos on your phone, sync them there from your computer using iTunes. The process would look like this:
Connect your phone to your computer, when it appears in iTunes on the left sidebar right-click on it and select Transfer Purchases; right-click again and select Backup.
Disconnect from your computer and go to Settings>General>Reset>Erase All Content and Settings to return it to new
Go through the activation setup, choosing to Restore from iCloud backup. Make sure your phone is plugged into a charger and has access to wi-fi as this can take hours to complete.
When complete, without connecting your phone to your computer, open iTunes and go to Preferences. On the Devices tab check "Prevent...from syncing automatically"
Now import the old photos to your computer (see http://support.apple.com/kb/HT4083)
When done, open iTunes, right-click on the name of your phone on the left sidebar and select Restore from Backup, choose the backup you made in step 1.
Go to the Photos tab and select the photos you want to sync to your phone and sync. -
I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Communication between TNS_Listener and Apex Listener
Dear all, I how does the communication between TNS Listener, Apex Listener, and Apex? For some reason I got the following error from Apex listener: Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.u
-
Updating the key field in a table
I am trying to assign new values to the primary key column in a table. As it is necessary to hold a permanent record of the relationship between the new and old values, I am extracting the old values into another table and assigning the new values fr
-
ORA-02149: Specified partition does not exist
ORA-31693: Table data object "aaaa"."bbbbb":"P_2012112216" failed to load/unload and is being skipped due to error: ORA-02149: Specified partition does not exist SQL> select partition_name from dba_tab_partitions where table_name='DME_bbbbb_RES' and
-
hello everybody, i have a problem: i need to make a timer for my application that send one mail to the admin at every months end.. so i ahev a timer class that do this. my question is...how and where can i define this timer ?? that when the applicati
-
Display column value conditionally
Hi all, I have a report with two columns and I would like to display the second column based on the value of the first one; if the first column is equal to 1 then show the second column : Col1 Col2 0 1 value 1 value 0 0 I tried to put a condition on