I had several tab groups, but the last time I opened Firefox they'd all disappeared, and been replaced with an advert - can I recover my tab groups somehow?
I've set Firefox so it re-opens my old tabs every time I run the program, and also installed Tab Groups. Usually it opens all the tabs in all the groups with no problem, but this time they'd all disappeared and been replaced with a single advert. Is there a way to recover the old tab groups?
It's likely that by the time there is an answer the data to allow recovery will be long gone, but this really make me angry. I have been operating with the same tabs for months now, and by using tab groups... poof, now all gone. I use tabs precisely because digging around to find all these pages is a time consuming task. some I don't use for a week or two, but when I needed them, there they were. '''BIG BLACK MARK''' awarded to Firefox on this one! My trust level of this software, which had been very high just went to below IE, which is really saying something.
Similar Messages
-
I updated my ios two or three weeks ago, but suddenly beginning this morning all of the photos in my text messages have disappeared. They have been replaced with question mark placeholders. I can't access any videos/photos that either I have sent or others have sent to me. I did nothing to instigate this change (no software updates, etc.) and have already tried resetting my phone multiple times.
Thank you!!
-CaitI have the same condition on my iPhone only. I also have an iPad, a Macbook Air and an iMac that share the same iCloud account. Messages with photos seem to work fine on all devices except my iPhone. All of a sudden all the photos in my iPhone message streams have disappeared and been replace by question mark placeholders. I rebooted all devices, shut down messages, and rebooted, restarted, with no luck. Very bizarre and extremely frustrating. Any suggestions?
-
I had 4 installation disk but the last installation disk is missing. I still allow to keep the Photoshop , Indesign and illustrator software in the computer but i can only keep that on a trial of 30 days. In order to use it permanently, I have to activate the Suite. As the phone activation service is no longer available. I try the online activation as mention in the phone message when I tried to call, but is not successful@ as it didn't bring to an activation page. What should I do to activate it or solve the problem?
There should be an option tro activate when you run any of the installed programs.
-
I cannot install the latest version of iTunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall. This has left me with no iTunes and the new version will not install until I can uninstall all the old components. Help please
You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
tt2 -
i don't remember my security answer and it's not my 1st time for using this device,i using this before..but the last time I try to buy some games using iTunes card its saying this is your 1st time using this device so I need to answer the security questio
https://expresslane.apple.com/
-
The following phrase/option box keeps popping up on my finder: The last time you opened Finder, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? regardless of whether I click to reopen or not the box disappears and then comes back again regardless of which answer I pick. How do I get rid of this annoyance?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process: Numbers [1021]
Path: /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier: com.apple.iWork.Numbers
Version: 3.0 (1470)
Date/Time: 2014-06-27 16:13:23.405 +0100
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14I have a problem to open my Number Program. this message appear when i try to open"The last time you opened Numbers, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again" then I tried to open it but nothing happened.... I would be thankful if you could help me..
Process: Numbers [1021]
Path: /Applications/Numbers.app/Contents/MacOS/Numbers
Identifier: com.apple.iWork.Numbers
Version: 3.0 (1470)
Date/Time: 2014-06-27 16:13:23.405 +0100
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 243D9264-54B7-E9AE-2F83-D11098965D14 -
Hi,
When I run my Mac application, I get a error message saying "The last time you opened Sample_App, it unexpectedly quit while reopening windows. Do you want to reopen its windows again?".
This message is not localized, i.e. this error message always display in English even when my system language is set to non-English language.
I want to know if its a System throws error message? How can I localize this message?
Your help/support will be highly appreciated. Thanks in advance.
- MayurPlease follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
How could I re-open my mail box, as an error message blocked "The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?" Even I entered re-open, the airbook does not response but prompt the same error message again.
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
After i upgraged to Mavericks I am having a problem to open mail and get this message
The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?
Please help
ThanksThis works but you have to get all the Envelope Index files that might be in there.
Make sure that you also delete Envelope Index-shm and Envelope Index-wal
and there could be some files named this with gibberish as suffixes too. -
The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
My iCal has frozen when I tried to add a cut and paste to the calendar for notes on a meeting I'm attending. I have to force quit but the next time I open it is still frozen and everything I've tried doesn't erase the message so I can continue using. Can't use at all. Help!
I have the same problem--have you found a solution?
-
I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.
Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay -
updated today and cannot open my mails it says: The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
My emails are coming in on my ipad but the next time I go in they are gone . Can i gete them to stay
My emails are coming in on my ipad but the next time I go in they are gone. How do I get them to stay
Hey lynda117,
Thanks for the question. I understand that you are experiencing some issues with Mail after updating to OS X Yosemite. To troubleshoot, let’s first try to rebuild your mailbox. You can follow the same steps from previous versions:
Mail (Mavericks): Rebuild mailboxes
http://support.apple.com/kb/PH14958
Select a mailbox, then choose Mailbox > Rebuild.
When you rebuild mailboxes for IMAP and Exchange accounts, locally stored messages and attachments are discarded, and the messages and attachments are downloaded again from the server to your Mac. Your mailbox appears empty until the download is complete.
You can also try deleting the affected account and re-adding it. in Mail > Accounts.
Thanks,
Matt M.
Maybe you are looking for
-
Attempt to validate an already invalid RegionSite-Error on running ADF Page
Hi All, I have ADF Application with a single simple jspx page contains only a single region having taskFlow "taskList-task-flow-definition" which will be available in "adflibTaskListTaskFlow.jar" While running the page i am getting the below mentione
-
How do I include an image in the middle of a sentence in sapscript?
Hello friends, How can I include/print an image or graphic representation in the middle of a sentence using SAPscript forms? For example, I would like to be able to add an image of a telephone right before the telephone number, or even print someone
-
How I can set limit of JTextField to 5 signs???
-
Mail.app: Select outgoing (SMTP) server per message?
Dear community members, I'm looking for a solution to the following problem: I do have multiple e-mail accounts which are configured in the following way: One of them is the master account (let's say [email protected]) added to Mail.app as a POP acco
-
Setup could not detect any SB Audio Card on your system..... (win XP and SB02
What do I need to do? I run it under Win XP, have installed the XP drivers but when Im trying to run the Installing Program from the original CD I get the above message... Creative model SB 0220 Anyone has any suggestion? Thanks