I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427
Similar Messages
-
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
I changed my password on adobe digital and now I recieve an error message when I try to open epub
error message
Can anyone help ?
CharlesAre you sure it is still the same underlying Adobe account that was used when then books were originally accessed, with just the password changed?
In that case, should just have continued working, but ... you are using the world's worst software so anything can happen.
Try deauthorizing the computer and reauthorizing.
~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
Another is "E_AUTH_NOT_READY"
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0 -
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.
You seem to have tried everything, and you say it's syncing fine on your Dad's iMac, so I assume, you have also done a Disk Diagnostic from an earlier post by tt2 and conclude that your iPod Hardisk is good.
You don't have to use it as a heavy paperweight, the problem is only using your Windows 7 machine for syncing.
In your troubleshooting steps, did you try to use another High-Speed USB 2.0 port, USB controller resource are very scarce, so if you use other USB devices, while syncing your iPod, it may just freeze.
Windows have a bad reputation for device conflict, so better don't connect other USB devices, while syncing, better sync it while disconnected from Internet, stop antivirus just before you go to bed.
Have a nice day! -
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme. -
getting a error message when i try to open i tunes, file msvcr80.dll not found. Have tried to reinstall i tunes but receive another error message when thats done down loading it reads service apple mobil device failed to start, verify that you have sufficent priviliges to start system. Any ideas?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader. The upgrades indicate they were successful but I still get an error message when I try to open I-Photo telling me I need to prepare the library
I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader.
But have you run the the iPhoto Library upgrader? It is installed in Applications > Utilities. Launch it and direct it to your iPhoto library.
Which version of iPhoto did you upgrade from?
The upgrader is only necessary, if you have been running iPhoto7.1.2 or earlier. -
I'M GETTING THIS ERROR MESSAGE WHEN I TRY TO OPEN THE ITUNES
im getting this message when i try to open my itunes "the itune library. itl file it's locked, on a locked disk, or you do not have write permission for this file" it was was working fine but all of a sudden it this issue just happen, i have windows 7.
I had the same problem as mentioned above. 2 Users, sharing the same iTunes account. Found following solution:
Check sharing and permission for the shared iTunes folder. In my case under HD->Users->Shared->iTunes
Also check all permissions of the underlying folders and especially *iTunes Library Database file*. In my case directly in the iTunes directory
For whatever reason, that file had no sharing. I added my wife's user name with Read /Write permission and it works again.
I guess a bug in the update. It worked fine for a long time before the update.
Mark -
Just updated itunes and now it won't recognize by ipods. UGH! I've tried the trooubleshooting but so far nothing has worked. I haven't yet uninstalled.
So here's the fix I found. Uninstall itunes along with the connected Apple files and programs. Then reinstall itunes.
Hope that helps -
What can I do to fix Adobe? I cannot open any PDFs, always getting an "error" message.
Adobe is a company with many products, which specific one are you talking
about? And what version of it? And what's your OS? And what exactly is
the error message you're getting?
On Thu, Jan 1, 2015 at 8:38 PM, Aquinnahgirl <[email protected]> -
I am getting an error message on my desktop when I try to open itunes: "the folder "itunes" is on a locked disk or you do not have write permissions for this folder"...Any idea what I need to do to correct?
Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Sinve I joined the cloud, i cannot open books I had on my kindle app after downloading. I am getting an error message telling me to delete and re-register my kindle app. I've done that, but am still getting the same message.
Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.
-
I am getting an error message in iBooks when I try to open and read my book, how do I correct this?
Welcome to the Apple community.
Have you tried deleting the book and re-downloading it from the purchased section of the bookstore. If this doesn't help, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
the error message reads Runtime error programC:\program.file\itunes\itunes.exe R6034 Application has made an error has made attempt to load the C runtime Library incorrectly. Please contact the applications support team for info. Can anyone help with this?
Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086
Maybe you are looking for
-
Hello, The scenario is from XI->CRM, the reciever communicaiton channel is as below. PROXY_INVOICE_Recv, Transport protocol : http 1.0. Now i need to debug the proxy in my recieving system CRM. Can some body guide about this. Thanks in advance. Best
-
Domain Users are allowed by default to join domain
Hi everyone ! Recently i install Windows Server 2012 Standard Configure Active Directory Domain Services Create simple user "test1" then i go to windows 7 client and join domain with this "test1" user. and i shocked how is it possible that a simple d
-
The virtual keyboard is too big
I am an engineer working in the Chicago area. Sometime, I have to do inspection work on some structures and to make sure that the projects adhere to the rules and regulations of local, state, federal, etc. Traditionally, we would be going through s
-
Scanline logic in Form printing
Hi , How do we take care of scanline while developing forms? Is there any special logic or alignment required while designing the form?Request your inputs. Thanks! Regards, Savitha
-
CFREPORTPARAM Not Overriding Subreport query
I'm trying to use CFREPORTPARAM to override the query of a subreport but it is not working. It still uses the query that is defined in Report Builder for the subreport when the report is run. <CFREPORT TEMPLATE="Reports/rpt_AllProfileFieldsReportPerf