I hate clicking on Next / WLS Console - Deployments

I have over 100 modules deployed and I have to (repeatedly) redeploy one of them on the last page.
How can I get to the last page of deployments without clicking Next ten times?

I have found that if you right-click "Copy Link Location", paste the link into your browser, then modify the start-rec parameter to 100 (or whatever), it will send you to the correct page.
(the problem with using WLST is that you might be doing remote administration via the console - and you have to download/install 1GB of software simply because there is no Page <n> on the Deployments page on the WLS Console).

Similar Messages

WLS Server shows as down, but is up in WLS console

I have a WLS Domain discovered in OEM (12c). I used the same agent configuration and setup on all 3 servers in the cluster. Server 1 and 2 show as up, as well as the cluster and overall domain. Server 3 shows as down with numerous incidents flagged with Agent down and Weblogic Server Is Down. In WLS Console, all three servers are Running and working properly.
What sort of emctl commands can be utilized to verify that the agent on Server 3 is communicating properly with the WLS? Or steps within OEM, perhaps to verfiy the communication. I have checked config files and setup procedures, and Server 3 is identical to Server 1 and 2, aside from the 1/2 vs 3 and corresponding hostnames. Looking for any sort of input...

That is why I am confused. The agent is actually up. It is secured and sending metrics for the box perfectly. I can perform ./emctl upload agent successfully. When I navigate to Host Targets, the box shows as up. But when I navigate to Middleware Targets, on the WLS domain, Server 3, which is on that box, shows as down. The agent unreachable is cleared on that page, but it shows the WebLogic Server as down.
When I access the WLS console, the server is up, running and working fine. That is why I am lost when it comes to my next step. If agent is working fine and the setup is identical to server 1 and 2. Why is it down, when the rest are up? I noticed in the Server3.log file, I am getting spammed with a Certificate error. "CERTIFICATE_UNKNOWN alert was recieved from *Server 3*. The peer has an unspecified issue with the certificate." I am getting the cert warning from server 3 on server 3. So is there a problem with some certificate and that is why the agent on server 3 can not communicate with the WLS?

RDBMSRealm problem: users logged out when using WLS console

I have implemented RDBMSRealm for Oracle mapping it to our database tables on WLS
6.0 SP2. It works fine except a strange problem: if users are logged in on a web
application with FORM authentication each time an adminstrator uses the WLS console
clicking on an item (for example "Servers" or "EJB", not only on "Security") all
the users are logged off and the login form is presented to them. Does anybody
experienced the same problem? Is there somebody that knows a solution?
Romano

Interesting, Thanks.
I'll give this a try.
Also, while enabling user switching and turning of the "lock on screensaver" option, I noticed the "Log out after [] minutes of activity" option in the Security preferences, which if this does what I think it does, may be my only problem.
If this turns out to be true, i've just had a major "DOH!" moment :/
I'll try this first and post back my results.
Message was edited by: carl-g

I cannot sign in. "This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."

I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In".   The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue..   Stuck...

The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here:   ~/Library/Cookies
Click Go the move the   com.apple.appstore.plist   file from the Cookies folder to the Trash.
Relaunch the App Store.

IO Error while creating the Datasource in WLS Console

Hello,
We are using Jdeveloper 11.1.1.1.7, I am trying to create a Data Source using WLS Console, I am getting below error
- I tried creating DB connection using SQL developer with same DB Connection info, it works fine.
- I verified the Port by logging into corresponding UNIX box where weblogic server is running, I did telnet, and able to connect.
any ideas are appreciate.
Connection test failed.
IO Error: The Network Adapter could not establish the connection oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:489) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:234) oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34) oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567) oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404) oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:674) oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267) oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134) weblogic.jdbc.common.internal.DataSourceUtil.testConnection(DataSourceUtil.java:314) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:734) com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:474) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) java.lang.reflect.Method.invoke(Method.java:606) org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306) ..

The Network Adapter could not establish the connection exception is caused by one or more of the following configuration errors:
The database host name, port number, or database instance name is wrong.
The database TNSListener has not been started. The TNSListener may be started with the lsnrctlutility.
C:>lsnrctl start
1. What is the connection url?
2. Is Oracle database running?

WLS-Console export vs JMS browse API

Hi -
We are attempting to solve a problem revolving around JMS pagination and seek your help.
We have a scenario where in certain cases the application queues pile up due to the input flow being far higher than the consumer application capacity.
In this scenario, we would like to have a mechanism where we can drain out the queues.
We wrote up a custom script which would read the messages in a queue and dump the values in a file.
This seems to work for smaller numbers, but when the pile up grows (in number in our case around 20K messages) it appears that the messages are being paged out we see a heavy slow down effect (we have filters on the JMS headers).
One suggestion was to export all messages present (by compromising on the ability to filter messages) through the functionality present in Weblogic console. Wanted to check if the performance of the export (on the WLS console) would remain linear irrespective of the number of messages or would we still hit a performance block if the messages are paged.
TIA,
Senthil
Edited by: 920205 on Mar 12, 2012 3:23 AM

Exporting messages may be practical here either.
I am not sure if you have looked at the JMS performance tuning guide, which has a section for handling messages backlogs.
My suggestion would be to see if you can add producer flow control and message expiration with error destinations.
For more details, please refer to http://docs.oracle.com/cd/E17904_01/web.1111/e13814/jmstuning.htm#CHDIJEFE
Hope this helps.
Dongbo

How to get the page number when click the(Next page) Icon on Tableview

Hi all,
       I had implemented a tableview in one of the Views that I had implemented for a BSP application. I am using MVC framework.
Let us assume when we execute the BSP and a table view got 11 pages.
How I can keep track of the page number when we click the (Next page, Previous page, Bottom , Top) Icons on my tableview . Is there any attribute willstore that corresponding page number of the tableview when we click the corresponding Icon's??
I had checked both CL_HTMLB_TABLEVIEW and CL_HTMLB_EVENT_TABLEVIEW Classes and i don't find any attribute.
Any help will be appreciated.
Thanks in advance.
Thanks,
Greetson

Hi Greetson,
I was thinking to write a weblog about that.
But now I would like to have your opinion:
I coded a generic method in my main controller (but you could also insert it in the application class) that save the firstvisible row in the class me->firstvisiblerowlist (that is a table)
DATA: l_firstvisiblerowlist TYPE zmmsp_tableview_1st_visi_row.
DATA: ff TYPE ihttpnvp,
        ffs TYPE tihttpnvp.
me->request->get_form_fields( CHANGING fields = ffs ).
LOOP AT ffs INTO ff.
    IF ff-name CP 'f*visiblefirstrow'.
      READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerowlist WITH KEY name = ff-name.
      CASE sy-subrc.
        WHEN 0.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          MODIFY me->firstvisiblerowlist FROM l_firstvisiblerowlist INDEX sy-tabix.
        WHEN 4.
          IF sy-tabix = 0.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
          ELSE.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            INSERT l_firstvisiblerowlist INTO me->firstvisiblerowlist INDEX sy-tabix.
          ENDIF.
        WHEN 8.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
      ENDCASE.
    ENDIF.
ENDLOOP.
Than you have to provide a generic method to read the firstvisiblerow for each tableview
GET_FIRSTVISIBLEROW
*IM_TABLENAME
*RE_VALUE
DATA: l_firstvisiblerow TYPE zmmsp_tableview_1st_visi_row.
READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerow WITH KEY name = im_tablename.
IF sy-subrc = 0.
    re_value = l_firstvisiblerow-value.
ELSE.
    re_value = 1.
ENDIF.
And in the DO_REQUSET of each controller you could write something like:
* Paginator
DATA: l_tab1_visiblefirstrow TYPE sytabix.
l_tab1_visiblefirstrow = o_bsp_main->get_firstvisiblerow( 'f019id_tab1_visiblefirstrow'    ).
As usual pass the value to the view via:
o_page->set_attribute( name = 'tab1visiblefirstrow' value = l_tab1_visiblefirstrow ).
Did you get it?

HT5655 Has Adobe Flash Player been blocked again. I can download the image and proceed to installing; however, installation of flash prompts me to select update methods. I cannot select update or not update. I also cannot click on NEXT.

Has Apple blocked Flash Player again, listing it in the block list. I am able to download the image from Adobe, and begin the install process. Once I get to the option to select update Flash automatically or not, I cannot select an option or click on NEXT to finish the installation. Thoughts?

Adobe's Flash Player Install Manager was updated about a week ago.
I suggest trying the download from Adobe's site here:
http://get.adobe.com/flashplayer/?promoid=JZEFT

Persist column values clicking on next or previous link of pagination

Hello All,
I have created one tabular form type report using apex APIs like apex_item.checkbox,apex_item.textfield etc
where i want to update the values of each rows , i have also implemented pagination also.
Actual problem is that i have 17 rows and pagination is set to 15 rows per page.
so my report have 2 pages ,one contains 15 rows and other has 2 rows,
In my case after entering data in page 1st , as i am clicking on next page then all the values which is entered in first page get reset,so only the value of page 2 is updated,
so i want all the rows get submitted with new value on clicking of final submit button.
Apex Version = 4.1.0
Database = 11g
Thanks,
Jitendra

So you would like the "next" pagination button to also submit the data on the page, then navigate to the next page of results? Or just have the first set of values stored in limbo somewhere until the user hits the submit button?
I'm not expert in tabular forms, but it sounds like you want your cake and eat it too

Google is NOT WORKING with Firefox 3.6.8, you can type in & Search but clicking on next is a dead link; does nothing?

Google is NOT working on Firefox 3.6.8, suddenly today. You can type in search and get results on initial page. Clicking on 'next' link or any number links is dead. Yahoo & Bing seem to work. I do not have a Google toolbar. Very frustrating. This suddenly happened today. Please check into it.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Error in WLS console

Hi,
Am getting the below error in my wls console .
please help how to resolve this.
<Mar 20, 2012 2:44:38 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "WebCenter-CustomPortalDS": IO Error: The Network Adapter could not establish the connection>
<Mar 20, 2012 2:44:38 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Activities-CustomPortalDS": IO Error: The Network Adapter could not establish the connection>
<Mar 20, 2012 2:44:39 AM PDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "WebCenter-CustomPortalDS": IO Error:

Check if you are able to login with the users for all the schema's for the data-sources.
If you get account locked exception then unlock it.
http://ramannanda.blogspot.in/2012/02/oracle-database-account-unlocker.html
Else check the connection properties in your application.

Edit env-entry values from web.xml in the WLS console.

Hi guys!
Is it possible to define JNDI variables of type java.lang.String using WLS Console?
Thanks

I think this would require the use of a deployment plan, which you can learn about here: [http://e-docs.bea.com/wls/docs103/deployment/config.html] . This won't be as convenient as just editing the value directly in the admin console. In fact, it won't even prevent the requirement of redeploying the webapp. It will only allow you to make the change without rebuilding and repackaging the webapp.
It's questionable whether it's practical or meaningful to change env-entry values in a web.xml without redeployment, because even if you could change the values without redeploying, you'd have to reinitialize the servlet/filter with the changed environment parameter.
If you really need this dynamic reconfiguration ability, you might have to design the facility into your application, using some sort of polling or event handling capability.

Impossible to start UCM managed server with the WLS console

Hi,
I cannot start the UCM managed server with the WLS console. The node manager is running by startNodeManager.cmd. The admin server by startWebLogic.cmd.
When I start the UCM server with the console WLS (Environment, Servers, Control tab and Start on the checked server), it seems to be running (the state is RUNNING) but when I open the url on the the web server UCM there is a 404 error
In the log, there are many java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup, oracle.security.jps.wls.JpsWlsStartupClass, oracle.core.ojdl.weblogic.ODLConfiguration, oracle.jrf.AppContextStartup, oracle.as.jmx.framework.wls.spi.StartupListener, oracle.ias.cache.Startup, oracle.dms.wls.DMSStartup ...
If I start UCM directly by startManagedWebLogic.cmd and not with the WLS console, everything is OK. No error in the log and UCM server is working well
Any idea ?
Thanks
Hugues

Great!
I had the same error: when starting UCM on WL Console, it starts and says Running. But when accessing it on the browser receive the error 404. In the other hand, when starting with Commands, it force shutdowns.
I have set the StartScriptEnabled property to true, now I can start UCM only on the command Line, to start it on WL Console, I have to manually start the node manager.
Is there a way/script to start the node manager automatically?
Regards,

Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help

Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help

Oh thank you very much, i was worried after a whole day's hard work but most important that i had lost my photos, i don't understan the photo,shared and albums? I have a lot of photos in my albums that it didn't let me delete, yet i could delete a lot of others, could you explain this to me please

WLS console in Linux

Which file i can find out WLS console and port information on Linux,we are using 11g WLS on Linux.

Hi appsguyflorence,
Yes the port information can be found in the domain home in config/config.xml.
Default it is http://myserver:7001/console. If you use the default port 7001 then this is not stored in the config.xml.
For example:
# 7001
<server>
 <name>AdminServer</name>
 <machine>new_UnixMachine_1</machine>
 <listen-address></listen-address>
</server> # 7003
<server>
 <name>AdminServer</name>
 <machine>new_UnixMachine_1</machine>
 <listen-port>7003</listen-port>
 <listen-address></listen-address>
</server>Regards Peter Lorenzen
http://theheat.dk

I hate clicking on Next / WLS Console - Deployments

Similar Messages

Maybe you are looking for