I hate to see Verizon Logo on the back of Galaxy S6 Edge.

I think S6 edge looks very cool and slick, no doubt I will buy it once it comes out. The emerald green color is gorgeous, which makes me feel like I am buying the phone just simply because of the design and color. But seriously, Verizon's logo is way too much ugly and big that it ruins the whole design of the phone. Why does the logo have to be that big??  No other company does that. Verizon is notorious to the world for doing that ****. I just hope they could reduce the size of it so that it does not ruin the whole design of great phones. One of my friend changed from Verizon to AT&T just because he hated what Verizon has done on his galaxy note 2 home button. Sadly, I have grandfathered unlimited plan, so I can't change mine to AT&T. I just hate to see Verizon ruining the design again and again by misusing their power to phone manufacturers. Well, one of the reason why people buy iPhones. sigh

Yes, they may lose customers who prefer to have a removable battery and an SD card. They may also gain customers who don't prefer a removable battery and an SD card. There could be just as many either way.
The bigger problem may be IF the 2550 mAh non-removeable battery does not last a full day on a single charge.

Similar Messages

  • At the back of iPhone you can see made in california and "F C" logo.. Mine dont have FC logo at the back what this it means?

    at the back of iPhone you can see made in california and "F C" logo.. Mine dont have FC logo at the back what this it means?

    Once in a while the restore process seems to mess up.  What I don't understand is why you would perform a weekly restore.
    At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud.  Restore a device whenever it no longer works correctly, not just as a matter of maintenance.  If it ain't broke, don't fix it.

  • My iPhone 4S stopped displaying the "Verizon" Logo at the top left of the screen. Now all it shows is the signal strength and 3G. It seems to be falling off the 3G network more than ever, What is going on?

    My phone quit displaying the Verizon logo at the top and now it only displays 3G and the signal bar. And its falling off the 3g network after finishing with voice calls.

    There is no roaming agreement with AT&T since a CDMA phone can't roam on AT&T's GSM network and vice-vera. The roaming agreement is with Alltel, which is in effect with Verizon since it was Verizon that purchased Alltel's CDMA network.
    Edit, I guess it is with AT&T since I now recall AT&T purchased some of Alltel's assets.
    Message was edited by: Allan Sampson

  • In iphoto '11, how do I remove the apple logo from the back of the book?

    In iphoto '11, how do I remove the apple logo from the back of the book?

    In the All Pages window of the book click on the Options button at the bottom.  In the drawer that appears click on the Settings button. 
    Then in the window that comes up uncheck the checkbox that says Include Apple Logo at end of book.
    Happy Holidays

  • Pad 2 with no apple logo on the back

    i recenty got back my apple ipad from best buy warranty with no apple logo on the back. it just came with a plan case is that normal?

    My main guess is that it's to save money from having to laser etch them, but they're the same part, just without the lettering.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Cracked the Apple Logo on the back of my Macbook Pro Retina

    Hi, I recently bought a Macbook Pro Retina for use at university. Whilst in a lecture, the person sat in front of me managed to elbow the top lid trying to remove their coat. Its caused quite an ugly crack in the lit logo and I have taken it to my local Authorised Service Provider who have told me, due to the lit logo being attached to the retina display itself, the repair would most likely cost upwards of £600.
    I was hoping someone on here would be able to perhaps offer some alternatives to paying 2/3 of the price of the computer itself...
    P.S. I bought an AppleCare plan under the false pretence that it 'covers everything' (quote from the salesman who sold me the machine, I assumed at the time that everything included damages and theft). I now know that this isn't the case and don't fancy putting my word against that of the salesman's. Plus I guess its my fault for assuming.
    Thanks for help in advance, apologies for long post.
    Ed

    Hey B-bram,
    For issues with video resolution not being consistent, I would start with resetting the NVRAM on your MacBook Pro. That will reset the resolution to its default as well as resetting other default settings like sound volume and start up volume. Take a look at the article below for more information about that and how to perform the NVRAM reset. 
    How to Reset NVRAM on your Mac
    http://support.apple.com/en-us/HT204063
    Take care,
    -Norm G. 

  • Ipod touch 4th generation refurbished from eBay. Lacks logo on the  back. counterfeit?

    I recently purchased my IPod touch off of ebay but when I received it, it didn't have an Apple logo like my IPad. would this mean this is a counterfeit?

    check the serial number with apple. that will tell you if its legit or fake. Most likely its a fake, but double check it with apple to confirm!

  • Verizon has changed the shipping date Galaxy S4 in May 23,2013

    I have pre-order Galaxy S4 online since April 25,2013. Today I just check the order status and ti has changed the date from May30,2013 to May 23,2013 now

    I read this story yesterday and it made me really happy because I ordered mine on the same day and since it will be available in store the 23rd, I'm hoping the people that pre-ordered it will get it either early or at least the same day because I don't think it would be fair for the ones that ordered online to not get it when others can just go to the store and get it.

  • Red Light On Next to Verizon Logo

    I have a steady Red light on my Incredible 2 next to the Verizon logo. Had this phone over 2 years - never saw this light before, nor can I find ANYWHERE what the heck this means. I've tried resetting. Also, battery is draining very quickly. This came on suddenly.

    KinquanaH_VZW what in the world would the charging port have to do with the proximity sensor?  Not to mention other chargers and outlets?  Like I suggested to lasinah_vzw please read the OP thoroughly before attempting to answer a question.  The OP clearly states that the light is to the LEFT of the Verizon logo, whereas the notification light (which blinks orange when the battery is low, and is solid orange when the device is charging) is in the speaker grill, to the RIGHT side of the phone.  I also find this disturbing that I have already addressed this and you also make the same incorrect suggestion.

  • I bought an ipad 3 and at the back of the ipad got only the apple logo and no other information like serial number or where it was designed or manufactured.Could this still be from apple or fake

    Many Ipad im seeing has the Apple logo and other informations at the back of the Ipad but mine comes with just the Apple logo at the center of the back and no other information given underneath.Could this still be a real one from Aple or fake because mine only have the Apple logo at the back

    As fas as. I know, all iPads should have a serial number on the back of the device. Even refurbs that have a new or replaced back should have a serial and model number engraved on it. I would tend to think that you got a bootleg device.

  • OT: Blog article on the new Actions panel in Edge Animate

    Hi all,
    For those of you still trying for ways to best work with the new Actions panel in Edge Animate, see this blog post
    The Updated Actions Panel « Adobe Edge Animate Team Blog
    Thanks,
    Preran

    I am finding the new panel really difficult to use! Thanks for this.

  • Can I use a 4G LTE AT&T Galaxy S6 Edge on my Verizon account?

    Below are the two Carriers Bands and Frequencies along with the GSM Version (AT&T) of the Samsung Galaxy S6 Edge
    Verizon 4G LTE
    - 700 MHz, Band 13
    - 850 MHz, Band 5 ***
    - 1700/2100 MHz, Band 4 ***
    AT&T 4G LTE
    - 700 MHz, Band 12 & 17
    - 850 MHz, Band 5 ***
    - 1700/2100 MHz, Band 4 ***
    - 1900 MHz, Band 2
    According to GSM Arena this is the GSM Galaxy S6 Phone  Bands/Frequencies
    Technology
    GSM / HSPA / LTE
    2G bands
    GSM 850 / 900 / 1800 / 1900
    3G bands
    HSDPA 850 / 900 / 1900 / 2100
    HSDPA 850 / 900 / 1700 / 1900 / 2100 - G920T
    - G920A
    4G bands
    LTE
    LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 12(700), 17(700) - G920T
    LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 17(700), 20(800) - G920A
    Speed
    HSPA 42.2/5.76 Mbps, LTE Cat6 300/50 Mbps
    This shows compatible Bands so, I ask the community, am I right to assume the AT&T Galaxy S6 Edge
    will work when it has been carrier unlocked and fitted with a Verizon 4G LTE nano sim?
    Thanks in advance for your help,
    B

    While it is possible to get most of the phone to work, you wouldn't have 100% compatibility with all coverage.  You would also have to have a previously active or currently active SIM to activate the phone, IF Verizon would activate it to begin with.  Don't be surprised if Verizon gives you some push back since the IMEI number won't be in their database.

  • I can hear a slight lose part when I tap the back top of the iPhone 3GS?

    I have the iPhone 3GS, gave my wife my old 3G. when I tap with my finger on the top of the 3GS up above the apple logo on the back I hear a slight rattle (or what seems to sound like a lose part inside the unit).
    When I do the same tap my wife 3G it sound solid with no slight rattle inside?
    Is it possible the compass component inside the phone or a different accelerometer Apple may of used (like a mercury switch) that may has a slight rattle?
    I know this may seem trivial, but now I find myself tapping my phone and pondering if I have a lose part. The phone works great otherwise???
    Thanks

    Check the Ring/Silent switch above the volume rocker switch. It could be loose.
    Message was edited by: dmiannay

  • 1 faded dot on the left side of verizon logo?

    i just bough my incredible and i been discovering the phone. But when i was out side and the sun hit my phone i could see a dot on the left side of the verizon logo. just wanted to know what does it do?

    AZSALUKI wrote:
    there is actually a third sensor that we can't even see. the gov't installed it to read our thoughts.
    I thought that one was for Verizon to read our thoughts. I figured that is why you get in trouble so much!

  • After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

    after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
    steve

    See this tip --> http://support.apple.com/kb/TS1559
    If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

Maybe you are looking for

  • Oc4j 9.0.2.0.0 and  8.1.7 client

    I need to use the latest production version of oc4j -> 9.0.2.0.0. My client needs use to be able to use the oci drivers with the 8.1.7 client install. Is it possible to use 9.0.2.0.0 with the 8.1.7 client install? I can use the thin driver no problem

  • How to copy the material in my ipad into the new Itunes that I just installed ?

    I just bought a new PC and installed the itunes. I want to get the PDF book in my ipad, how to do it ?

  • Error trying to generate addmrpt (ADDM Report) on Oracle 10.1.0.4

    Hello, When I launch $ORACLE_HOME/rdbms/admin/addmrpt.sql on my Fedora 3 Oracle 10g connected using sys as sysdba (or system), I get the following error : Specify the Begin and End Snapshot Ids ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Entrez une valeur

  • HT1386 iPad Mini not syncing - Goes through steps 1-5 and does not add content

    I am absolutly baffled by this one. I cannot seem to get iTunes to sync any conent over. -The iPad is set up for syncing over the cable as Wifi sync is very buggy -I've tried different USB ports -i've restarted iTunes -Restarted the iPad -checked and

  • Corporate Email..

    So my corporate email was accessible from ActiveSync on my Treo 700w... But I can't figure out the settings using the "Outlook" option. I don't wanna ask IT b/c we're supposed to only expense phone bills (wireless) that use ActiveSync. Any way I can