I have 18gb memory but only 800mb available

My phone is telling me that i only have 800mb of memory, even though it is a 16gb phone, i have deleted all photos and music from the phone, but this hasnt free up any memory.
any help??

What memory cleaning app and why are you using it...?
How much does "About This Mac" report..?
How much does "Activity Monitor" report..?

Similar Messages

I have 8GB memory, but only shows total of 6GB

I have an early 2009 iMac with 8GB of memory, and before I upgraded to Mavericks, it would show a total of 8GB between used and available memory in my memory cleaning app.
Now, it only shows a total of 6GB between used and available memory.
Any reason it's not reporting the full 8GB of available memory?
Thanks,

What memory cleaning app and why are you using it...?
How much does "About This Mac" report..?
How much does "Activity Monitor" report..?

TS1814 Most of the songs on my iPod Classic no longer dshow up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Th

Most of the songs on my iPod Classic no longer show up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Thanks you for any help.

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same

I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same. The screen look perfectly fine but I can press the numbers 3 6 9 or cancel

Take it to your closest Apple store and have them look at it.

My ipod is dead. I have tried resetting but to no avail. I have attached to itunes and it sees that the ipod is bad, but it still can't seem to work. How do I get it fixed?

My ipod is dead. I have tried resetting but to no avail. I have attached it to itunes and it sees the ipod is bad, but it still can't seem to work. How do I get it fixed?

Its probably just as you said, it's dead. I mean the battery.
I have a second generation iPod and the battery doesn't hold a charge long. So yours must be really struggling with the battery.
You can send it off for a battery replacement, or as is expected due to the cost of doing that and with standard manipulative business thinking, you could just get a new iPod like a good little customer.

Anyone come across error 11 while trying to synch or update an IPhone 3GS that previously had not problems synching? Have reinstalled ITunes but to no avail...?

anyone come across error 11 while trying to synch or update an IPhone 3GS that previously had not problems synching? Have reinstalled ITunes but to no avail...?

Seems that way. I think I am going to have to give in and spend hours on the phone with Apple support. I don't want to, but I am at a loss. I will share any discoveries...

My iPad says when i try to download a movie that i don't have enough memory, but when I check I have plenty for the movie and more. What can I do? Also, I can't completely sync to iTunes, when i try it waits at waiting for items to copy forever.

My iPad says when i try to download a movie that i don't have enough memory, but when I check I have plenty for the movie and more. What can I do? Also, I can't completely sync to iTunes, when i try it waits at waiting for items to copy forever.

Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation.

HT4623 in our house we have 2 iphones but only since the upgrade to ios 5 my partner also gets all texts my firends who have iphones too.. how do i stop this?

in our house we have 2 iphones but only since the upgrade to ios 5 my partner also gets all texts my firends who have iphones too.. how do i stop this from happening? I do not get messages he is sent though??
Please can you help and let me know what I need to do to fix this - thanks!

you guys are using the same apple id in imessage seperate apple id and you wont have the problem

Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.

Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.

I have exactly the same problem, happy a few days ago. Did you find a solution?

My iphone was supposed to have 8 GB but only 6.7 are available

My iphone was supposed to have 8 GB but it says only 6.7 are available and i keep running out of room! Why is this?

Some for the formatting and system and other software you have.
I'm not sure if Apple still does this but there was a way GB used to be calculated that meant when you bought a drive it was always a few percentage below the advertised size.
Message was edited by: Limnos - see link by roaminggnome below

8.00 GB of installed RAM/MEMORY but only 3.99 GB "usable"

Here is my system:
OS: Windows 7 Home Premium 64-Bit
CPU: Intel i5 750 @ 2.67Ghz
Motherboard: MSI P55 GD65
Ram: G.Skill 4x 2gb 240-Pin DDR3 1333 (PC3 10666) dual channel memory (8gb total)
BIOS shows 8gb of installed RAM, Task Manager shows 8gb installed RAM, Resource Manager shows 8gb installed RAM. Right-clicking My Computer > Properties shows "Installed Memory (RAM): 8.00 GB (3.99 GB usable)"
With all the research and other forums posts I found, I have:
- Tested all 4 ram sticks individually (before the G.Skill I had the same problem with 2 Kingston sticks)
- Unchecked maximum memory in msconfig.exe > BOOT > ADVANCED
- Updated BIOS to latest version (1.11 a.k.a 1.B0)
- Loaded BIOS optimized defaults
- Cleared CMOS and loaded optimized defaults again
- Tested memory with Windows Memory Diagnostics tool with no errors
- Removed CPU to check socket for bent pins...no bent pins...reseated CPU
I have not:
Enabled "Memory Remapping" in BIOS because I do not have that option available in BIOS
I did read this post about G.Skill ram: https://forum-en.msi.com/index.php?topic=178019.0 and checked by ram settings and they are automatically already at the 9-9-9-24 timings, 1T command rate.
Yikes! What else is a man to do?

Quote from: RemusM on 17-March-14, 15:34:37
OK.
Perform the following tests with 2 memory modules (4GB RAM):
1)
1.a) use the slots 1 & 2 (those close to the CPU).
Check out the usable system memory
1.b) use the slots 1 & 3
Check out the usable system memory
2) msconfig.exe / Boot / Advanced
2.a) set the max memory to 4096MB and reboot
Check out the usable system memory
2.b) unset (uncheck) the max memory setting and reboot.
Check out the usable system memory
3) use the same 2 memory modules (4GB), access the BIOS and make them run at 1066MHz (7-7-7-20 at 1.50...1.55V)
If all the above don't fix the issue, post a screenshot of the memory mapping (System Information / Hardware Resources / Memory)
Good luck.
Alright, RemusM...got some new developments here. Thanks for sticking with me....
1)
1.a) Slots 1 & 2 (single channel mode): 4gb installed, 4 gb read and usable by OS
1.b) Slots 1 & 3 (dual channel mode): 4 gb installed, 4gb read but only 1.99 usable by OS
I stopped there and did some more slot tests...and I stand corrected from my earlier comments (I had written down that each stick worked in each slot, individually, but these notes are from 5 years ago...so...however):
With only 1 stick installed (2gb), starting closest to CPU:
- Slot 2 (blue plastic slot): PC will not start, motherboard beeps 3 long beeps (ram error, from what I Googled)
- Slot 1 (black plastic slot): PC starts, 2gb read and usable by BIOS and OS
- Slot 4 (blue plastic slot): PC will not start, motherboard beeps 3 long beeps (ram error, from what I Googled)
- Slot 3 (black plastic slot): PC attempts to start (3 times, fans and lights start and then stop) and then it hangs (with fans and lights on but does not start)
Would I be right to assume my Slot 3 has been the problem all along? Or is the motherboard supposed to only start with 1 stick of ram in slot #1?
Also of note: since I first built this computer it has always took 3 attempted starts (fans and lights go and stop) to finally fire up (I know, I should have realized this red flag sooner and probably mentioned it).
Also of note: with 3 sticks installed - in slot 2,1,3 - the system reads all 6gb but only 3.99 usable by the OS again. Indicating, I would think, that only slot 2 and 1 are being used.

Backup requires 1099GB , but only 300GB available !

I have at least figured out part of this problem. First I get the message:
"Are you sure you want to back up on the disk your original data is on."
But I am choosing the first partition of Bay 2 HD which is a 1TB partitioned into 2 500GB's.
I have a Bay 3 HD which is configured the same.
I say yes I am sure. Then I try to backup and I get the message:
Backup requires 1099GB, but only 300GB is available. I have computed the data on all 5 volumes and it turns out to be 1099GB. The 5 volumes are my main HD which is 500GB, and the 4 partitioned volumes in Bays 1 and 2. This is a total of 2500GB of which 1099GB is used.
Time Machine is trying to backup all 5 volumes on the selected volume. What can I do about this?

I did find one little glitch. If I mount an external drive for backup, etc. and the Time Machine is due to run, and the drive has enough data to put me over the limit of my target volume, then the Time Machine attempt fails. Not so bad, except all the Time Machine backup data is lost. The most recent is still there, but all past data is gone.
What is causing this?

I have moved to rural Texas USA and have Exede satellite internet (only source available). A time machine is connected to the Exede satellite box. Besides the time machine I have one Airport Express. Both devices show function. Daily lose internet service

I have moved to rural Texas USA. Only ISP is Exede, a satellite service. I connect with a time machine and an Airport Express. Daily service gets dropped and requires disconnecting and reconnecting the time machine to the satellite box. The dealer is working the problem without success. He is not very familiar with Apple products. Any solutions?

You are going to need to do a few things. And there might not be a simple resolution at all.
I would ring the ISP again and ask if they support any routers.. because in the end, replacing the router might cost you $100 but save a lot of pain. You can keep the extreme for wireless connections to those devices that work ok with it.
I would also note, the issue might not be extreme but Mountain Lion.
Do a search .. many people have experienced issues with the wifi refusing to join when it wakes. I have experienced it myself. There was no problem with the wireless.. it was some sleep issue in the laptop.
But one thing I would do, on the last screen shot you gave me..
Where the ip range is 10.0
Please change that to 192.168
Because of the private addressing used by the ISP.. you will run into issues with routing.
When you change the value.. you will need to then reboot everything.. and everything will change to 192.168.1.x addressing. This is important.
Secondly, change wireless names to all meet the lowest common denominator.. ie SMB protocol.
So names that are short, no spaces and pure alphanumeric.
I recommend you change all names to that spec.
C9 here gives some more info for why this is important, although the specific issue is different.
http://pondini.org/TM/Troubleshooting.html
Thirdly I want you to install 5.6 utility unless you are running Snow Leopard or Lion still this is a bit tricky. But only 5.6 can access the Extreme's log. Also you can see the actual wireless connection graphs.
All of this was chucked away with v6.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

I am trying to install Elements 12, but it continues to download Elements 10, which I already have. I have uninstalled 10, but it still does the same thing! I have bought 12 but only have the licence key

I have bought Elements 12 as a download and have a key, but cannot install it because the download assistant keeps trying to install Elements 10! I tried uninstalling elements 10, which I do have on my computer, but it does not seem to make any difference. What can I do?
Thanks
Harry

Harry can you please post a screen shot of the Adobe Download Assistant installing Elements 10? You can find more details on how to post a screen shot at FAQ: How do I capture and post a screen shot or video?.

PB 12" G4 supposed to have 512Mb RAM but only 384 ?

Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 384 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Sudden Motion Sensor:
State: Enabled
Version: 1.0
Ok those are the specs of my machine
It was bought June 05 and came with 10.3.
I then installed 10.4 and have updated to 10.4.4.
In October I was editing a large DVD file and my mac became really slow. I thought it was bc my HD was too full (which it was). so then I bought an ext HD and transferred heaps of data over..
But it was still really slow, the same as before.
I am pretty sure it came with 512mb ram and is supposed to. I don't remember what it said when I first bought it but I'm pretty sure it would've been 512.
I have not tampered with or opened the RAM slot.
I bought the PB from a reputable apple reseller here in Sydney so I doubt they would've done anything dodgy. I called them and they confirmed it should've had 512. They also told me if there are major probs it will take up to 4 weeks to fix.
Since I can't live without my computer for 4 weeks (!!) I thought I could figure it out by myself.
Any ideas?
thanks.

Hi Livia,
I had the same problem with my PowerBook. Suddenly 128MB of RAM disappeared and the computer became slow. I was sure I had 512MB of RAM.
You should check in the System Profiler under Diagnostics if there is an error.
In my case, System Profiler reported an error with the user-replaceable RAM. I installed another RAM (1gb stick) the computer only recognized half the RAM from the chip and System Profiler was still reporting an error.
Now I must to take the powerbook to the technical service because the problem is in the logic board, not with the RAM.
Powerbook G4 12" 1.5 Mac OS X (10.4.4)
PowerBook G4 12" 1.5 Mac OS X (10.4.4)

I have 18gb memory but only 800mb available

Similar Messages

Maybe you are looking for