I have 2 23" displays only one adc output?

I have 2 23" Apple studio displays is there a video card with 2 adc ports? my computer is g5/1.8DP/4GB the graphic card has 1 adc port and 1 dvi port, I'd like to update the card so that I might use the both monitors.
Cheers'

No. A video card can only pass through enough power to support one ADC connection since all the display power goes through the card.
ADC is licence by Apple, no video cards have been made with the connection for many years.
You will need a DVI to ADC converter to use those monitors with any non-ADC connection.
http://www.amazon.com/gp/offer-listing/B00011KHT2/ref=dp_olp_0?ie=UTF8&condition =all

Similar Messages

In report i should have to display only single country

Hello..
In myreport its dispalying company,costelemt and many more fields,users want some changes they have to display only one country and also courency also.they should have to enter the country name starting letter.
thanks...

If they want only one country you should give them the possibility to filter the country......put country characteristic in Free Characteristic Panel ....this give users ths possibility to make a drill down and filter according to country...
I hope this helps you

Display only one variable in the header and not column in WAD

Hi All,
my requirement is to be able to display only one variable in the report output header and hide the others. I am able to display all by using the INFO FIELD ITEM and saying variable display ON - but the requirement is very specific for only one variable display.
how can i achieve this ?
Thanks,
Shweta

Hi,
You can insert a text item and Turn off the others or Hide these from Filter pane I have done that and then use that query for your WAD.
Steps:
1. Uncheck all the variables from your Design item in Analyzer.
2. Insert a New Text Item and check the Variable you want to display.
3. Go back and run the Query.
Even you can change the position in the Query and Save as a workbook.Let me know ,if this works.
~AK

How can I display only one value of a field with two or more values?

Post Author: skiabox
CA Forum: Crystal Reports
I have a field in my report with 2 or more values (depending of another field id).For example for id = 1 the report gives me 2 names in that field.For id = 3 the report gives me 3 names in that field.I want to display only one of these names in the id row.The selection of name is random.Thanks!

Hello Tim, would barely fit in this situation since this code resides on the client’s interaction side of things. I’d recommend using JavaScript for this matter, e.g. var Data_FName1 = document.getElementById(‘Data_FName1’).value;. If you still opt for using CFML, then you’d go for proxying your JavaScript code to a CFC.

How to display only one record.

Hi Gurus,
Here my requirement is i have 2 pages.
first page having project_number lov,create and tableRN.
once u select the projectnumber and click on the create button it is navigate to secound page,here enter the data and click on the submit button it ll insert into database table and navigate to fitst page and display the data in tableRN what ever u insert the data(this part is over).
but the problem is, in tableRN displays all the records(previous records also displayed)
my requirement is display only one record(click on the submit button at the time of record only).
Plz help me
its very urgent.
Thanks
Seshu.
Edited by: its urgent on Jan 3, 2012 10:52 PM

Seshu,
Do u want to display the inserted row...
Regards,
Gyan
www.gyanoracleapps.blogspot.com
www.querenttech.com

MSS iView 'Team Calendar' display only one Month

Hi ,
The Managers want to see at least 3 months for the leave , in order to schedule resources/coverage .MSS iView 'Team Calendar' display only one Month . Can we change the number of months ? or use another tool/functionality via the portal ?
Any help or documentation are welcome .
Regard's

In SAP standard config there is no option so as to display more than one month on in Team calender iView.
In you case you will have to do development.

Display only one row for distinct columns and with multiple rows their valu

Hi,
I have a table having some similar rows for some columns and multiple different rows for some other columns
i.e
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
9825000111 01-jan-06 'a' 991543154 02-feb-06 d
9825000111 01-jan-06 'a' 154845545 10-mar-06 a
What i want is to display only one row for above distinct row along with multiple non distinct colums
ie
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
991543154 02-feb-06 d
154845545 10-mar-06 a
regards,
Kumar

Re: SQL Help

I have not bought only one program only

I have not bought only one program only
It SSH
Gath message from you it was reported that I bought three programs and this is not true
This is the body of the message
Or maybe pressed Balkhtae
Can canceling
Greetings,
Billed To:
Tamer Salama
EGY
Order ID: MH*****MDD
Receipt Date: 21/01/13
Order Total: $21.97
Billed To: Visa .... 0450
Item
Developer
Type
Unit Price
SSH-Terminal, v3.2.2 (4+)
Write a ReviewReport a Problem
PRAKASH KATARIYA
App
$0.99
Dont Touch This, v1.2 (4+)
Write a ReviewReport a Problem
Se Young Kim
App
$0.99
iSniper 3D Arctic Warfare, 224K Credit Pack
Report a Problem
TRINITI INTERACTIVE LTD
In App Purchase
$19.99
Order Total:
$21.97
Please retain for your records
Please See Below For Terms And Conditions Pertaining To This Order.
Apple Inc.
You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/
Server Admin Remote
Harlekins
Magic Lock Screen
Panorama Concepts
VNC Viewer
RealVNC
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/accountSummary
<Personal Information Edited By Host>

Posting personal information ina public forum is a very bad idea.
We are all users like yourself, no one here can do anything about your account.
If you have issues, report them to iTunes Customer Support... they are the only one's that can make changes to the account or reverse charges.

Multi Language- Picklist fields are displayed only one language for Reports

Hi!
I am working on Siebel On Demand with Multi Language (English and Spanish) and it works well for web interface, the automatic translation for picklist works properly.
However when I create any report (with any Record Type) the fields setup with picklist are displayed only in spanish language even though I am on English mode.
Have you any reference(s) or previous experience(s) on that?
Thanks in advance
Mtb

Hi,
in reports the language of the picklists corresponds always to the company default language.
The only solution I now (its really static and not so nice):
Create one report per language and change the picklist field by using CASE statements...you see its hard to refresh if you have lots of values :)
cheers
Myriam

Displaying only one photo at a time

something crazy has happened in my iPhoto program.
i have been using it for years now, but i cannot escape this situation.
my display preference was to see the rolls listed chronologically and from this screen i could open any roll, and by clicking on one of the revealed images, i would view that image, with a scroll list of the rest of the images in my library above that.
the problem now is that when i open iPhoto, i am seeing only one image in the "Edit" window, with the active blue frame around it. there are no images to scroll through horizontally above this blue framed picture. there is a scroll bar to its right that takes me through my entire library a single image at a time.
how do i restore the main screen so that i have a representation of all the film rolls? how do i get out of the single-image/blue border mode i am stuck in?

Hi tubby,
On the bottom right of the window is a slider. Slides the dot to the left to make the image smaller so you can see more than one across.
Lori

Display only one instance if value is repeating

hii everyone,
i have a requirement i want to show following data
no name
1 a
1 b
1 c
2 d
2 e
3 f
3 g
3 h
in this form
1 a
b
c
2 d
e
3 f
g
h
i.e if elements are reeating then show their only one instance
i am using oracle 11g is there any way to write this on sqlplus??
thanks

Hi,
810345 wrote:
i am using oracle 11g is there any way to write this on sqlplus??The SQL*Plus command is
BREAK ON noAfter you give this command, if the first column in the output is called no, then SQL*Plus will not show it if it is the same as the value on the line right above it.
You may have noticed that this site noramlly compresses whitespace.
Whenever you post formatted text (such as query output) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.

Have you chosen only one option button at a time

Hi...
    I have got a problem while working with the option button in screen painter.I have three option buttons. In Run time, I want to select only one option button, mean while the other two option buttons should not be selected.
~
Thank You in Advance
Roseline Christina. B

Hi,
Please check the following
To select an OptionBtn item, the item must be bound to a data source (UserDataSource or DBDataSource) using OptionBtn.DataBind
The following is the sample to add 2 option buttons and group them.
Dim optBtn As SAPbouiCOM.OptionBtn
    Dim oFrm As SAPbouiCOM.Form
    Dim oItem As SAPbouiCOM.Item
    Dim oUserdatasource As SAPbouiCOM.UserDataSource
    ' set oFrm = ..
    'Option 1
    Set oItem = oFrm.Items.Add("BD_rbRes", it_OPTION_BUTTON)
    oItem.Left = 240
    oItem.Top = 10
    oItem.Height = 16
    oItem.Width = 220
    Set optBtn = oItem.Specific
    optBtn.Caption = "Button One"
    Set oUserDataSource = oFrm.DataSources.UserDataSources.Add("BD_resDS", dt_SHORT_TEXT,1)
    optBtn.DataBind.SetBound True, , "BD_resDS"
    'Option 2
     Set oItem = oFrm.Items.Add("BD_rbPost", it_OPTION_BUTTON)
     oItem.Left = 240
     oItem.Top = 30
     oItem.Height = 16
     oItem.Width = 220
     Set optBtn = oItem.Specific
     optBtn.Caption = "Button Two"
     oItem.Visible = False
     Set optBtn = oItem.Specific
     optBtn.GroupWith ("BD_rbRes")
Hope this helps,
Vasu Natari.

I have two emails only one shows on my phone

I have two e-mail accounts only one will show on my iphone

If the account was added to your Mail, Contact, and Calendar in you settings, then click on your mail icon then click the mailbox icon on the top left look at the bottom of the screen for your accounts.

Duke's bookstore2 displays only one book title

When I run Duke's bookstore2 from the Tutorial (Chapter 12: JavaServer Pages Technology: The Example JSP Pages), I'm not getting any error messages, but instead of seeing the graphical "Duke's Bookstore" heading followed by a horizontal line and "Please choose from our selections:" the only display I'm actually seeing at http://localhost:1024/bookstore2/bookstore is this single link:
"Web Components for Web Developers,"
and when I View Source for the page, I see only this:
<fmt:message key="What"/>
[actually 5 lines of space here]

<c:url var="url" value="/bookdetails" />
<blockquote>Web Components for Web Developers,
<c:url var="url" value="/bookcatalog" />
<fmt:message key="Talk"/></blockquote>
<fmt:message key="Start"/>
It seems to be displaying only the contents of one data set, rather than the data for all the books as part of a complete HTML page. (But when I open the pointbase console and "select * from books;" I see details for all 7 books in the table. So the full table is populated in the database.)
When I click on that single link, I go to this URL:
http://dar2000:1024/bookstore2/bookstore?bookId=203
where I still see only one line with that one book title and nothing else on the page.
Any suggestions? Thanks!

Actually, I did add the prelude and coda pages in the JSP Properties tab.
But, when I entered "/*.jsp" under URL Patterns on that same JSP Properties page, I did not erase first the "/URL_properties" that appeared there by default, so I ended up with "/URL_properties/*.jsp" in that field.
When I reduced that to "/*.jsp" the complete page displayed, including the bookstore header, clock applet, Start Shopping link, copyright info, etc.
Stephanie, thanks!

How to display only one row in report when...

Hi,
I've a report display in which i've 3 fields EBELN, LIFNR , MENGE. EBELN, LIFNR are from EKKO table and MENGE id from EKPO table .
         On clicking the EBELN there will be getting another report in which we get EBELN,EBELP and MATNR and MENGE from EKPO table .
       The problem is while displaying 1st report if the purchase order has two items in EKPO table then its displaying two times. How can i get only one time and the MENGE should be sum of those two item prices.

hi use the statement not to get the multiple items..
sort itab by ebeln.
delete adjacent duplicates from itab comparing vbeln.
i will give u an example to get the total and subtotal ....
*& Report ZR_A1
REPORT ZR_A1
        NO STANDARD PAGE HEADING.
Tables declarations
TABLES: VBAK, VBAP.
Variable declarations
DATA: C1 TYPE C.
Internal Table declarations*
DATA: BEGIN OF IT_VBAK OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      VKORG LIKE VBAK-VKORG,
      VTWEG LIKE VBAK-VTWEG,
      SPART LIKE VBAK-SPART,
      END OF IT_VBAK.
DATA: BEGIN OF IT_VBAP OCCURS 0,
      VBELN LIKE VBAP-VBELN,
      POSNR LIKE VBAP-POSNR,
      MATNR LIKE VBAP-MATNR,
      NETWR LIKE VBAP-NETWR,
      BRGEW LIKE VBAP-BRGEW,
      NTGEW LIKE VBAP-NTGEW,
      END OF IT_VBAP.
DATA: BEGIN OF IT_FINAL OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      VKORG LIKE VBAK-VKORG,
      VTWEG LIKE VBAK-VTWEG,
      SPART LIKE VBAK-SPART,
      POSNR LIKE VBAP-POSNR,
      MATNR LIKE VBAP-MATNR,
      NETWR LIKE VBAP-NETWR,
      BRGEW LIKE VBAP-BRGEW,
      NTGEW LIKE VBAP-NTGEW,
END OF IT_FINAL.
Selection-screen design
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-R01.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN: END OF BLOCK B1.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/7 'LIST TO DISPLAY SALES ITEM INFO'.
START-OF-SELECTION.
Populating it_vbak table
SELECT VBELN
       VKORG
       VTWEG
       SPART
       FROM VBAK
       INTO TABLE IT_VBAK
       WHERE VBELN IN S_VBELN.
populating it_vbap table
IF NOT IT_VBAK[] IS INITIAL.
SELECT VBELN
        POSNR
        MATNR
        NETWR
        BRGEW
        NTGEW
        FROM VBAP
        INTO TABLE IT_VBAP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
populating the final list
LOOP AT IT_VBAP.
READ TABLE IT_VBAK WITH KEY VBELN = IT_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE: IT_VBAK-VBELN TO IT_FINAL-VBELN,
       IT_VBAK-VKORG TO IT_FINAL-VKORG,
       IT_VBAK-VTWEG TO IT_FINAL-VTWEG,
       IT_VBAK-SPART TO IT_FINAL-SPART,
       IT_VBAP-POSNR TO IT_FINAL-POSNR,
       IT_VBAP-MATNR TO IT_FINAL-MATNR,
       IT_VBAP-NETWR TO IT_FINAL-NETWR,
       IT_VBAP-BRGEW TO IT_FINAL-BRGEW,
       IT_VBAP-NTGEW TO IT_FINAL-NTGEW.
APPEND IT_FINAL.
ENDIF.
ENDLOOP.
SORT IT_FINAL BY VBELN.
LOOP AT IT_FINAL.
AT FIRST.
FORMAT INTENSIFIED ON COLOR 1.
WRITE:/35 'SALES DOCUMENT ITEM LIST'.
ULINE AT (100).
*endat.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/ SY-VLINE,
      2 'SALES.DOCU.NO',
      13 'ITEM',
      21 'MATERIAL',
      50 'NET-VAL',
      65 'GROSS-WT',
      82 'NET-WT',
      100 SY-VLINE.
ENDAT.
FORMAT INTENSIFIED ON COLOR 2.
WRITE:/ SY-VLINE,
       2   C1 AS CHECKBOX,
       5 IT_FINAL-VBELN,
      13 IT_FINAL-POSNR,
      21 IT_FINAL-MATNR,
      41 IT_FINAL-NETWR,
      56 IT_FINAL-BRGEW,
      71 IT_FINAL-NTGEW,
      100 SY-VLINE.
AT END OF VBELN.
SUM.
FORMAT INTENSIFIED ON COLOR 3.
WRITE:/    SY-VLINE,
         30   'SUB-TOTAL:',
         41   IT_FINAL-NETWR,
         56   IT_FINAL-BRGEW,
         71   IT_FINAL-NTGEW.
   WRITE:/100 SY-VLINE.
ENDAT.
AT LAST.
SUM.
FORMAT INTENSIFIED ON COLOR 6.
WRITE:/ SY-VLINE,
          30 'GRAND-TOTAL:',
          41 IT_FINAL-NETWR,
          56 IT_FINAL-BRGEW,
          71 IT_FINAL-NTGEW.
WRITE:/100 SY-VLINE.
ENDAT.
ENDLOOP.
regards,
venkat .

I have 2 23" displays only one adc output?

Similar Messages

Maybe you are looking for