I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet. I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet. I al reset my router and still not change

I have 2 Apple TV's in my home. One is 2nd Generation and the other is 3rd Generation. One one that is 2nd Gen cannot connect to the internet. First I restarted, the I rest it and I even changed the password. still no connection. So I purchased the 3rd Gen TV and I have to same problem, but they are in different rooms. Before I had no problem with my 2nd Gen TV, but then one day it did not connect. I even had my internet provider come and check my internet and it worked ok, but no connection with the Apple TV. I have tried everything but no results. Somebody please help me.
Regards,
Richard

Hi richardwilliams51,
If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If that does not completely fix your Apple TV, you may need to restore it, using this article -
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

5GB is typically not enough space to download a movie. Often, movies take from 3 - 5 GB to begin with. The only option you have is to delete more things from your iPad. You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

DFSR- Initial sync shows completed(eventID 4104), but still not 100%

We are running a 2008R2 domain, but the DFSR members for this replication group are both 2003 R2 and 2008 R2. I have 4 different servers that all had similar(not 100% exact) contents in the folder before DFS. I setup DFS
in a Multi-purpose and full-mesh model and chose one of them to be the primary server. I noticed that the other members receive an eventID 4104(Initial Replication complete), but still do not have some files that exist on the primary server. Actually,
all 3 member servers have the 4104, but 2 do not have some old files and 2(including primary) do have the older files. These are not special files at all and I do not think those files were coped recently. Does anyone have any ideas of how a server
can throw a 4104, but still not be 100% in sync with the primary? The local System account does have full permissions on the old files that are outstanding on some of the members.
Dan Heim

Hi Dan Heim,
Please create a diagnostic report for DFS Replication, it will give you an overview about all files on all DFSR member servers.
In additional, check your staging size is set high enough on the replicated folder. If the staging folder not being big enough, DFS will be constantly trying to reduce the staging folder to be within the limits.
You could refer to the articles below to know more about staging size:
How to Determine the Minimum Staging Area DFSR Needs for a Replicated Folder
http://blogs.technet.com/b/askds/archive/2011/07/13/how-to-determine-the-minimum-staging-area-dfsr-needs-for-a-replicated-folder.aspx
Edit the Quota Size of the Staging Folder and Conflict and Deleted Folder
http://technet.microsoft.com/en-us/library/cc754229.aspx
There is a similar thread, please go through it to help troubleshoot this issue:
Server 2008 R2 DFS replication issue
http://social.technet.microsoft.com/Forums/en-US/cd976fc1-4134-4539-984e-83aa65c8dd83/server-2008-r2-dfs-replication-issue?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TV Screen says "No signal" when I try to use apple TV. Was working. ie Little Apple symbol would appear on TV screen, but now get "No signal" Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal"

TV Screen says "No signal" when I try to use apple TV. Was working. ie Little Apple symbol would appear on TV screen, but now get "No signal" Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal" HELP please

Same exact problem with my Apple TV. Worked like a charm the first two times we used it. Haven't used it in about a month, now no Apple logo when I turn it on, or the logo appears momentarily and distorted, and then an error message from my Samsung HD TV: Mode Not Supported.
What changed?
Bill O'Rourke
***@***********.com
<Email Edited by Host>

TS1559 since i installed ios8 my ipod5 is not connecting to the internet i tried doing evrething but still not connecting

since my ipod updaded to ios8 its not connecting to the internet i've tried evrting but still not working plzz help

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
- The troubleshjooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

My iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still, please help :)

my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help

http://support.apple.com/kb/ts1398

My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air

My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air. If sombody could tell me how to fix this that would be awesome!

Can't connect to the iTunes Store

I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

After i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me.

after i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me
Thanks

I do not understand what "it says in the windows connect to itunes" means?
What is "it" and what is "windows"?
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.

Welcome to the Apple Community.
Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.

TS1398 my ipod touch is connected to th wifi but still not open safari as they said solve the error 3 ?

my ipod is connecting to wifi but still not open the safari page

when i go to thee setting and i tap on the my wifi network it opens but DHCP is empty mean router no. DNS no. tgat all is empty thats why my wifi is not working what should i do for this ?

I have 2 Apple TV's in my home. When I attempt to login, is say cannot connect to the internet. I have reset both Apple TV's and also restarted them both.but still cannot connect to the internet. I al reset my router and still not change

Similar Messages

Maybe you are looking for