I have 2 apple tvs. One in the bedroom, one in the living room. When I try to airplay from my iPad, only the bedroom icon shows up. How do I add the living room?
I have 2 apple tvs. One in the bedroom, one in the living room. When I try to airplay from my iPad, only the bedroom icon shows up. How do I add the living room?
Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.
Similar Messages
-
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/ -
I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!
Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356 -
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
I get the apple tv error 61 when I try to airplay from my macbook air. What is going wrong?
Welcome to the Apple Community Cindy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
i have my ipod attached to an old, out of date email and when i try to update from my ipod it says "your itunes store password is incorrect" Any ideas why/how to fix?
Try from a computer. You may have to reset your password. If you can't get the comfirmation email then you can use the secret question. Once you can log in then you change the the email address.
See:
Frequently Asked Questions About Apple ID
Here is how to contact iTunes:
Apple - Support - iTunes - Contact Us -
what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?
Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!
Hi,
I have the same problem. Here is the screenshot of the error and I am using Windows 7 and Adobe Reader XI version 11.0.10. -
Apple ID couldn't be created because of a server error when i try to restore from a backup
Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud. -
I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?
Hi,
Both printer and computer seem to be on same network.
Please download and run the following utility to troubleshoot on the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
Also download and install the firmware update from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
Could you please help
MichelleRight click the printer in System Prefences - Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....
-
I installed the Kobo app on my Ipad mini and the logo appears on my screen b ut when I try to activate it a password is asked for. I entered my Apple ID password. Is this not correct?
No, you need to use the account id and password that you've set up with Kobo, the app is linked to your account with them so that you can download your kobo purchases into it
-
I use calendar in icloud all the time but when I try to print it all I get is a dark background....like the dard barkground on the main screen when accessing icloud. This happens on all devices...iphone, ipad and PC. Cant figure out how to get it to print for me. Any suggestions?
Welcome to the Apple Community.
Print from the calendar application on your PC, not from the iCloud.com web portal. -
i have two ipads and two iphones. when i try to contact my wife from ipad to ipad, both phones ring and connect. how do i fix this.
thanks,
gkvery helpful
still not sure im savvy enough to do it but will try
thanks,
gk -
I have not been able to get my new Macbook Pro to scan, either wirelessly or connected, with my HP Laserjet all in one M1217 nfwMFP printer. It prints wirelessly just fine, but if I try to scan, I get the message that no scanners are found. The guy in the Apple store had it scanning just fine with a new HP printer he took out of the box. Any ideas would be appreciated.
Allan 113I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=¤t_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472
Maybe you are looking for
-
Getting error in Report RPTQTA00
Dear Friends, While running the report RPTQTA00 for one employee, i am getting an error messege "You have not selected any generation rules". Whereas I have created the selection rule in table VC_T559L. Please guide me which tables I have to update t
-
*** Why is the AppleTV export preset making my HDV 4:3?
A couple of weeks ago I was exporting my HDV sequences with the quicktime conversion>AppleTV setting and things were great. My worflow is to export for AppleTV and then put all the files on my MacMini that is hooked up to my LCD flat panel. Today I t
-
Over 400.000 Spoolfiles in three days
Hello together, we have several V6R1 partiotions. Since a few days I have on two partitions a lot of Spoolfiles with the following content: Switch to user QSECOFR failed This is the only text in the spoolfile. File User User Data Sts
-
Async RFC to file -data not passsed to PI
Hi all, Im facing a peculiar problem in Async RFC to File scenario. I have done all the required configurations for it. Referred the following blogs : /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous /people/michal.kraw
-
Eail content of type html is dependent on which parameters?
Hi, I have to parse email content which is of type html. I have to take the reply message given and put that in database. Sometimes the reply message is put in DIV tags and some times in P tags. I want to know based on what parameters the content of