I have 2  iPads both the sane except for case color. One connects to my home wifi fine, the other will not "join". It finds the wifi name and the little circle turning wheel just spins.

I have 2  iPads both the sane except for case color. One connects to my home wifi fine, the other will not "join". It finds the wifi name and the little circle turning wheel just spins. I have tried about ten different "fixes" none work.. Reboot, forget wifi, etc.
Unplugged wifi on and on for about an hour.
I have compared settings between the two and cannot see any difference.
Both iPads worked fine last week. One made a trip to MI  and used cellular access just fine. Now that one still uses cellular OK, but refuses to "join" the wifi.
Too bad I can't attach a picture.
Anyone care to offer a unique workable solution I have not tried?
Thanks
WD9HIK

Have you tried renewing the lease in the WiFi settings? Settings>WiFi>Your network name>Tap the blue arrow>Renew Lease. If you haven't tried that - try it first before reading the information about restoring the iOS software.
Follow the instructions in here. If you are unsure about anything - do not proceed. Post back with questions first.
iTunes: Restoring iOS software - Apple - Support
Make sure that you transfer all purchases, backup the iPad and sync with iTunes first. When you restore to factory settings, iTunes should ask if you want to backup first, but it will not hurt to initiate a backup on your won before you even start the restore process.
How to transfer purchases into your iTunes library
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

Similar Messages

  • I have $15.00 credit from a gift card the prompt ask for credit card info-then gift card number when I enter it will not let me in to purchase videos?

    need help I cannot redeem the credit on my gift card to get music?

    First, make sure that you are following the correct procedure for redeeming a gift card:
    http://support.apple.com/kb/HT1574
    If you are sure you have followed the procedure correctly and iTunes shows the correct credit balance next to your Apple ID when you are connected to the iTunes Store, post back with exactly what is happening when you try to purchase and we'll go from there.
    Regards.

  • I bought a movie off of iTunes, but it will not play.  I click on it and the movie's menu shows up, but it will not allow me to select the "play" option.

    After purchasing a movie from iTunes, I clicked on the film and it brought me to the movie's DVD menu.  However, it will not allow me to select it to play.  I can select the "chapters" option, but I cannot select any of the chapters.  Essentially, it is stuck on the menu.

    Did the download complete?
    Resuming downloads from a computer
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Click the "Check Downloads" button.
    Click the Resume or Resume All button, or the resume arrow to resume the download.
    from http://support.apple.com/kb/HT1725
    Try right clicking or Control clicking the movie and choosing Show in Finder.
    Can you Right click the movie and Open With QuickTime Player?

  • HT1595 I have 6 other apple devices that have no problem connecting to my network, but my Apple TV will not

    I have 6 other apple devices that have no problem connecting to my network, but my Apple TV will not, any ideas?

    1: Unplug / shut off the router for 30 seconds
    2: Retore or unplug apple tv (If you unplug it, let it sit for 30 seconds as well)
    3: If all else fails try moving the ATV and router closer to each other, if nothing works I would consider it a defect as Apple products generally have great quaility and you never know what goes on behind warehouse doors!

  • MacBook will not turn on. I get Apple fiqure and then the wheel just spins. What can I do

    MacBook will not turn completely on. I get Apple fiqure and then the wheel just spins.

    Reinstall OS X. Either use your installer DVD or do a network restore if you are using Lion or Mountain Lion.

  • My imac wont start up the wheel just spins

    my screen went high contrast. i could not force quit so i powered off.  when i powered on the wheel just spins. this has been going on for an hour.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I cannot get Bluetooth to work on my iPhone 4. The wheel just spins. What can I do?

    I cannot get Bluetooth to work on my iPhone 4. The wheel just spins.

    The device you are trying to pair with must be in pairing (discoverable) mode. You can not pair with other mobile phones or computers (except for tethering).

  • I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it sti

    Hi
    I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it still has the same problem.
    Cheers
    Rachel

    Hi Rachel,
    You can follow the article: App doesn't open | Progress wheel spins continually to get your issue fixed.
    Let us know if the issue still persists or not.
    Regards,
    Ratandeep Arora

  • My mac is running slow.  the colorful wheel just spins for about 30 seconds then will alow me to procede. what gives?

    my mac is running slow and the wheel just spins.  any suggestions?

    my mac is running slow and the wheel just spins.  any suggestions?

  • TS1398 I have just purchased an iPad mini and it will not join my wifi. It detects my wifi network but will not join. I have a Mac, 2 iPhones and an iPad 4 and all work perfectly. The new iPad mini just won't behave. Any ideas?

    I have purchased an iPad mini and it will not join my wifi network. Any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help :(

    I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • TA48312 I use a 6 year old iBook G4.  It has gotten slow.  The wheel just spins.  Can someone help me?

    I am 89 years young.  I use a 6 year old iBook G4.  It has gotten slower than me.  I can't open firefox anymore.  I can't get to google in Safari.  The wheel just spins.  Can someone help me? 
    <Email Edited By Host>

    Hi, and welcome to Apple Support Communities.
    Are you posting with it here?
    How long has it been since you did any hard drive maintenance?
    After six years of use, the hard drive may be so full that it is hampering performance.
    From http://www.thexlab.com/faqs/lackofram.html  :
    Determine the available space on your Mac OS X startup disk
    In Finder®, select the startup disk icon. For most users, this is Macintosh HD.
    Press the Command-I keyboard shortcut.
    The Info window for your startup disk opens. In the General pane, the Capacity, Available (free space), and space Used on your startup disk is displayed, as seen in the following screen shot:
    As a general rule of thumb: if the Available space on the Mac OS X startup disk is less than 10 GB, it is time to free some disk space. We suggest 10 GB as an absolute minimum as this is generally the amount of free space required to reinstall Mac OS X 10.5 and earlier via an Archive and Install and still preserve space for VM swap files. More free space is better. For example, users of FileVault may want to retain more free space than that occupied by their encrypted Home folder: disabling FileVault requires free space somewhat greater than the size of your encrypted Home folder.
    Even though Mac OS X 10.4 doesn't take as much space as Mac OS X 10.5, you still need to keep quite a bit of free space on your hard drive. A too-full hard drive is a common cause of system slowdowns.
    If you find that you do have enough disk space, post back and we will explore other potential problems.

  • My iPhone says I have 5 app store updates.  I press update and the wheel just spins and it never updates.  the Icon stays black like its updating, but in never does

    my iPhone says I have 5 app store updates.  I press update and the wheel just spins and it never
    updates.  the Icon stays black like its updating, but in never does

    Hello Donna,
    I'm sorry to hear you are having issues with your iPhone. If you are having issues completing your app updates, you may want to make sure you can otherwise access the iTunes Store/iOS App Store. You may want to try the troubleshooting steps outlined in the following article:
    Can't connect to the iTunes Store - Apple Support
    If the iOS version listing in your post profile is correct (iOS 8.0.2), you may also want to make sure that your iPhone is updated to the most recent version of iOS:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Sincerely,
    - Brenden

  • Satellite A355-S6931 Low Sound - Volume Control wheel just spins

    I've checked and tried everything I can find or know how to do to get enough volume and nothing works.  Everything is set to 100 %.  I use headphones (same ones I used with my 5 yo Toshiba).  Why does that wheel just spin with no change in volume and no stopping point either way?  I have to suspend my Netflix service as I have about 2% sound.  Satellite A355-S6931 - 6 weeks old now.

    It might as well be broken as it affects absolutely NOTHING no matter how far or how long I turn it in either direction.
    I expect this computer to deliver an acceptable degree of sound.  I have some hearing loss and use headphones exclusively which have their own volume control.  My 6 year old Toshiba laptop would blast my eardrums out with volume if I wasn't careful to keep all controls from the max.  Granted, I paid more than double as much for the computer back then and got Win XP-Prof besides.  I wasn't looking for a "cheap" computer but expected comparable quality to my former Toshiba, in spite of being stuck with Vista.  I could do without MANY of the bells and whistles this thing has for some acceptable SOUND.  Seems like a basic provision. 
    Can I get the sound card replaced for something better?
    What about the adapters that sell for about $10 on eBay?
    BTW -- the Toshiba DVD Player won't work at all.  Using Window Media Player shows the DVD but the sound is totally inaudible.  I've had to suspend my Netflix service.

  • Just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

    just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad.  any help would be greatly appreciated.

    Double click the home button (square)  and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
    Good luck hope it works.

Maybe you are looking for

  • How to switch off primary screen

    Hi, I need to turn off me primary screen on a 2009 27 in imac, how can I do it wile using a second monitor ? thanks

  • Oracle equivalent of sql server CLRSplitSting function

    Hello Friends, I have a query in SQL Server - which is getting data . select addl_info_id, sort_seq, code, row_data, addl_info_group_id, group_sort_seq, group_row_data       from dbo.CLRSplitString('2406081,2410381,2427008,2430449,2466981,2495083,158

  • Post Data to WSDL after sign.

    Hi. How can i post data to wsdl datasource after digitally sign document (if it possible own pdf means)?

  • Photoshop CS5.1 VDCAssistant

    Hello, I've been using the Photoshop CS5.1 trial for a while now and I noticed that Photoshop always seems to open an instance of the VDCAssistant process.  This process is used to get images from the iSight webcam (Photo Booth, e.g., or a video chat

  • Maps not working in lumia 620 after phone udate

    My maps r not working after phone update. Plz help