I have 2 iphone4 with same user name

I have 2 iphone 4's and they both have my user name and password. I have downloaded the Find my Phone app on both of them. However, when I log in I can only locate phone #1 and don't seem to have any way to locate phone #2. I need to have access to both phones...#2 phone is my teenage daughter and I'd like to be able to check on her locations sometimes. The app is on her phone and is password protected...just don't know how to use it when on my computer as only my phone shows up.
Please help.
Thanks.

Go to settings - messages, send/receive, and disable whichever phone number you don't want the phone to use in each case.
you can keep the same AppleID for purchasing and other iCloud syncing if you like - go to settings - icloud and disable whatever syncing you prefer.
Matt

Similar Messages

"Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

Hi,
I have questions about "Accounting-Start" and "Accounting-Stop".
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,

vignesh and BalusC,
following is the code in front controller's doFilter method. is this not thread safe?
        HttpServletRequest req = (HttpServletRequest) request;
        HttpServletResponse res = (HttpServletResponse) response;
        HttpSession session = req.getSession();
        somepackage.User user;
        if(session.getAttribute("user") == null){
            user = new somepackage.User();
            session.setAttribute("user", user);
        }else{
            user = (somepackage.User) session.getAttribute("user");
        }user object maintains all information about a user. if it is in session scope, everything should work fine.
another observation is after some time of usage, both people in different systems are getting same session.getId()
in my logout page i am using
session.invalidate();
thanks,
moses

Problems setting up multiple exchange accounts with same user name

Hello,
I have two email addresses on the same exchange server at work that I would like to configure on my iPhone4 running iOS 4.3.3. I can setup the first email just fine but when I set up the second email iOS tells me " Cannot Create Account: An identical Exchange account already exists". Here is a working example:
[email protected]
[email protected]
username and password for both email1 and email2 are the same credentials. Am I getting this error message b/c the username for both accounts is the same? if so is there a workaround for it without having to change the username for one of the accounts?
Any help would be appreciated. Also, we are using Microsoft Exchange 2010.
Thanks

I'm having the same problem. From all the information I can find, iOS doesn't allow you to access multiple Exchange accounts using the same credentials. I'm not sure if this is a restriction of iOS or a restriction of Exchange ActiveSync.

I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine.

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Migrated and now 2 computers with same computer name?(user account)

I used the Migration Assistant to move info from iBook to my MacBook.
I don't know how but now on my MacBook I have a copy of my user account from my iBook.
Now, I have two user accounts on my MacBook, the original user account created when I started using the computer and now, my old iBook user account.
Is this normal?
Later, I would like to create a network using the two computers on my Airport Extreme n Base station.
Will it be a problem to have two computers with identical user accounts?

There is not a problem with having identical usernames on two different computers. You also suggested the "Computer name" was the same. Is this the computer name at the top of the "Sharing" preference panel? If so, those need to be different.

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Can itune and ipad have the same user name?

Setting up new ipad, can ipad and itunes have the same user name being my email?

What do you mean by "user name"? They can, probably will, use the same iTunes Apple ID, if that's what you're asking.

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

Recreate skype user with same skype name ?

I just deleted 21 skype users, by mistake, in Business Manager, is it possible to recreate them with same skype name ?
/Claus

Hi again,
Hope this helps.
alias_maps = hash:/etc/postfix/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-mailtransport:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,localhost,apm.pt,onlearn.apm.pt,ml.apm.pt,xserv e.apm.pt
mydomain = apm.pt
mydomain_fallback = localhost
myhostname = mail.apm.pt
mynetworks = 127.0.0.1/32,195.23.139.104/29
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = hash:/etc/postfix/smtpdreject
smtpddelayreject = yes
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsasl_authenticated,permitmynetworks, checkheloaccess hash:/etc/postfix/heloaccess,reject_non_fqdn_hostname,reject_invalidhostname,permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdsenderrestrictions = permitsasl_authenticated,permit_mynetworks,reject_non_fqdn_sender,reject_unknown_sende rdomain,permit
smtpdtlsCAfile =
smtpdtls_certfile =
smtpdtls_keyfile = $smtpdtls_certfile
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = hash:/var/mailman/data/virtual-mailman
João.

Can two I-4phones have the same user name and password?, Can two I-4phones have the same user name and password?

Can my husband and I share the same user name and password on our I-4 phones?

Yes.. but it can introduce complications.
If you're going to use the same Apple ID for iCloud, contacts, calendars, and photo stream are all shared if enabled.

Prompt user for input when rdp with same user as logged in

What I am trying to achieve: user dragos is logged in on a domain computer. When I connect with rdp with the username dragos on the computer I want user dragos to be asked if he allows the connection or not not to be taken over.
When you connect as different user it is being asked, but not when connecting as same user as logged in.
Searching for solutions I found this: Administrative Templates\Windows components\Remote desktop services\Remote desktop session host\Connections\Set rules for remote control of Remote Desktop Services user sessions and give it Full control with user
permission.
But it does not work as I was expecting.
Is there a solution for the logged in user to be promped if connecting with the same user name ?
Thank you

Hi,
user dragos is logged in on a domain computer. When I connect with rdp with the username dragos on the computer I want user dragos to be asked if he allows the connection or not not to be taken over.
As far as I know, there is no built-in method to achieve this.
You may try to search whether there any third-party tools which can achieve this, or write a script.
If you need assistance with scripting, here are some scripting forum links below for you:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Windows PowerShell Forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell&filter=alltypes&sort=lastpostdesc
MSDN Forums
https://social.msdn.microsoft.com/Forums/en-US/home
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I have 2 iphone4 with same user name

Similar Messages

Maybe you are looking for