I have 2 LCDs, one will not come on
I have a mac 2.66 quad core intel xeon with three graphics ports.
I have been using an Apple 30" lcd which has worked fine.
I just acquired a smaller apple LCD and plugged it in one of the extra ports. When you push the on button (lower rt side) the light on the button lights up but does not stay on nor does the monitor ever light up.
Here is likely the problem but I don't know how to fix it.
One port is listed NIVIDA GeForce GT 120 Display Controller, this open works fine.
The one that doesn't work is listed simply"display" and under type it's VGA-Compatible Controller. This one doesn't work?
Any advice?
This is an iMac forum, why aren't you posting in the Mac Pro forums?
Similar Messages
-
I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?
You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.
-
Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your timeThis is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.
-
I have a MacBook Pro and it starts up but the screen will not come on - any suggestions?
I have a MacBook Pro and it starts up but the screen will not come on - any suggestions?
The simplest operation your Mac can do is start up with the Option key held down. The code is all in ROM. It uses a One size fits all resolution to light up the display and draw an icon for each potentially bootable Volume.
The most effective thing your Mac can do when confused is to start up using the Shift key. It does one pass of Disk Utility "Repair Disk" then boots up with minimal extensions loaded and ask you to login. But if your Mac is really sick, it may never get there. -
I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong
When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works. -
Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on
You can try recovery mode to see if you can revive the iPad.
http://support.apple.com/kb/ht4097
Have you left the iPad charging for a couple of hours or so to be sure? -
Keep going round in circles - get Congratulations message from mobileme then still cannot sign into iCloud. Have successfully moved 2 other family accounts weeks possibly months ago but this one will not? Am running Snow Leopard 10.6.8 OSX. All ideas welcome as these are original mac accounts and keen not to lose them - call me sentimental:-)
Welcome to the Apple Community.
Unfortunately, OSX 10.6.8 will not support iCloud. You can use the mail address from the iCloud account with Snow Leopard bot not the rest of the iCloud features. You can access then via the web browser though at iCloud.com.
To set up iCloud mail.
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard -
Ipad mini became hot when charging and now will not come on. All usual resets have been tried
Mini ipad became hot while charging and will not come on. Normal resets have been tried.
I am assuming that you let the device cool down completely before you tried powering up. I don't know what more you might want to try...recharge, restore...the usual troubleshooting steps. Once again, assuming that the device has completely cooled down, I would let the device charge all night, try resetting one more time and if that fails, try restoring the iOS.
If that fails, make an appointment at an Apple Store and let an Apple Genius evaluate the damage.
Use iTunes to restore your iOS device to factory settings -
I can't get home sharing to turn on on my computers. I have a PC running windows XP that has a large library on it that I want to access from a newer windows 7 PC. I have turned home sharing on in both, same apple ID. I just will not come up. Any ideas?
Ugh, disregard.. it magically started working -_-
-
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
In text or email, the keyboard will not come up. I have to reset phone or turn it off to get started again. How can i fix this issue?
Hello Jennings Castle,
It seems your iPhone is slowing down and not responding frequently. To rectify this issue you may want to consider performing a restore on the device, and then restoring your data from a backup via iCloud or iTunes.
If the issue persists after restoring your backup, you would then want to consider restoring the device and setting it up as new. Below I have linked to article which offers guidance on both of these restore methods:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
BobbyD -
I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?
Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC. -
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I have trial version of Hulu. Tried to set no renewal option and will not come up on screen after clicking renewal options or box with subscription price.
I have been getting the black screen after waking. My screen is not set to sleep, so I don't know if it's related. Some discussion of the problem here:
http://discussions.apple.com/thread.jspa?threadID=1227085
http://discussions.apple.com/thread.jspa?threadID=1243743 -
I need to get on to centennial medical center website to apply for a job. The link will not come up because it is disabled. I don't know how that happened or how to undo it. Please help
See Outlook support for help with problems pertaining to the Outlook program.
Have you tried typing the web address for that web site in Firefox's Location Bar?
Maybe you are looking for
-
How to match a fingerprint template from database ?
i now can save a fingerprint template from database using this code.. Dim fingerprintData As MemoryStream = New MemoryStream Template.Serialize(fingerprintData) fingerprintData.Position = 0 Dim br As BinaryReader = New BinaryReader(fingerprintData) D
-
BPC ACCOUNT SPLIT/ALLOCATION
Hi There, I am new to SAP BPC - NW. I need to allocate a list of predefined accounts from their source to their destination using BPC script logic/functions. the accounts are around 400. The logic should read as demonstrated by the table below Source
-
I need help!
-
I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.
-
Updated to ios5, but cannot move icons on homescreen
I updated my ipod touch to newest ios5.1. When I go to the device screen, it won't show or let me move the icons on my screens anymore.