I have 2 mac emails and one is primary. How do I connect the second one to iCloud?
My iCloud account is set up for my primary @mac.com email, however I do not know how to connect my secondary email (set up 6 years ago) to iCloud.
Thanks for any assistance.
well i think one of you should change yalls name on the iphone its may not be the icloud but the names
Similar Messages
-
I have 2 .mac email accounts, one of them has a sub-address. Can I keep all 3 .mac email addresses in iCloud?
You will need to migrate each account seperately using the Move website, the alias will also be migrated to iCloud with whichever account it is under (the only problem with aliases, occurs when you have more than 3 in an account)
When you log into iCloud on the computer running Lion, iCloud will update your mail accounts for you, on the computers running Snow Leopard you will have to set up the mail accounts manually. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
You won't be able to use your iCloud contacts and calendars on the computers running snow leopard with Address book and iCal, but can access them from the web interface at iCloud.com -
I have forgotten my password and locked my phone, how can i clear the problem
I have forgotten my password and locked my phone, how can i clear the problem
By coincidence, this happened to my son just last night. You do NOT have to restore it to a new phone, but you probably want a current backup.
Luckily, you can still sync and back it up even if it's locked, so connect it to the computer you usually sync it to. Go to the summary page. It's easiest and fastest to use a local backup, so if iCloud backup is on, turn it off and click "Backup now".
After it backs up, either click "Restore iPhone", or
- hold home and the top button until the screen goes black, release the top and continue to hold the home button until iTunes says "iPhone in recovery mode detected".
Follow instructions to restore from backup, and then sync to restore content. Your phone will come up in an unlocked state. If you have any stuff that was purchased directly to the iPhone (only), you'll have to re-download it.
Remember to turn iCloud backups back on if you use them.
If you don't sync you iPhone to a computer then I *think* those instructions with the buttons will put it into a mode where you can restore it from the cloud (make sure it is NOT connected to a computer while you do this). Otherwise, you will have to restore it as a new phone, then go to settings, reset, then restore it from the cloud. -
I have two macs, a mac book air and a desktop mac. I want to buy Aperture 3 from the App store and get it to both computers,but I don't want to pay for it twice. Is there a way to do this?
No you don;t have to pay for it twice. Simply install it on one machine. Then go to the other. Log into the App store there and it will be on your pruchases list. Install from there.
Regards
TD -
I forgot my iCloud password, recovery email and security questions, How can I activate or unlink the Apple ID that was used to set up my iPhone? Please help me with this issue. Thank you.
You need to enter the password for the old Apple ID on the phone when it asks.
-
I have a mac osx and want to use a magic jack without the computer on all the time.
I am trying to use a magic jack plus without plugging into my mac. (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone).
What do I need to get a separate modem. I am on air port express (an old one)It appears that Magic Jack installs software on your system that it needs to run. Look at some of the threads in "More Like This" on the righthand side of this page or look here:
http://www.voipreview.org/review/magicjack -
Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?
I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here? -
I bought a Air Port Express device from Apple yesterday. We decided to set the Air port device in a room near the router to use as a wifi extender to areas of the house where the signal is weak. In our discussion with Josh, the Apple Rep. he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house. We have verizon DSL. Our town is very small...no cable provided so we are lucky to have what we have...some areas of our town can't even get what we have. We, didn't want to connect it directly to the Verizon device (router)....we followed the directions from Josh as well as the explicit directions provided by Apple support...it didn't work. We keep getting an error message. Does anyone have any advice ? Any help would be greatly appreciated. Please speak in "Laymen's terms" I am not technically savy....but..am determined to get this set up. Thanks to anyone, in advance!
Signed,
MEAbeepIn our discussion with Josh, the Apple Rep. he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house.
Unfortunately, it appears that Josh was not aware that the AirPort Express can only "extend" a wireless signal from another Apple router.
From Apple's literature:
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.
The AirPort Express is not compatible with a Verizon product for this purpose.
Your might want to have another conversation with Josh to ask his advice on how best to proceed at this point.
If you do decide to keep the AirPort Express, it will be necessary to connect it to your Verizon router using a wired Ethernet cable connection if you want the Express to provide more wireless signal coverage. -
I have a new PC, and i was wondering how i can transfer the playlist from my iPhone to the PC?
I recently bought a new pc, because my old one was trashed. i had all the songs in a external hard drive. i put it on to my new computer but i dont want to manually put those songs back into the playlists that i had. is there a way that i can transfer the playlists from my iphone onto the new computer?
You should migrate your iTunes library instead:
http://support.apple.com/kb/HT4527 -
Is it possible to have 2 mail programmes on my macbook pro? one for business related emails and one personal. I dont want all the emails in one mail programme. At the moment i have 2 personal email address being sent to my mail but because of receiving huge numbers of work emails it would be good to keep them seperate, what is the best way of doing this?
if i use the one mail programme can it separate the incoming mail from the different email accounts into 2 folders without me having to do it manually?
Yes, you can. Nearly all email software can do this. It involves creating two folders and a Rule for each folder.
Maybe call one folder Personal Mail, the other Work Mail (Apple Mail calls folders Mailboxes). One Rule would route all mail from your personal email account into the Personal Mail folder; the other Rule would route all mail from your work email account into the Work Mail folder. It's actually easy to do, all you have to do is click a few things and the rule is set up. Once the Rule is written you can also apply it to existing messages already downloaded to your Mac.
In Apple Mail, Rules are under Preferences > Rules. Follow the prompts to create a rule like this:
If = Any
Account = my Personal account (select the name of your personal email account)
Perform the following actions: Move Message to Mailbox = my Personal Mail (select the name of your Personal Mail folder (aka mailbox))
This rule says, "take any message that comes in from my Personal Account and move it to my Personal Mail mailbox (folder)"
Create a similar rule for your Work email. -
I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.
I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???
-
I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays. -
I have a sync account and have the app installed between my two mac computers and one pc. However, if I add bookmarks in one device, this is not updated on the other device. What should I do.
Hi!
Before Firefox 7 the service used to take some time to upload the changes and then to download them. Make sure that you wait several hours to confirm that it's not something else.
You can force them by using the "Sync Now" option in the Tools menu.
Fortunately, the behavior have changed with Firefox 7 and now the bookmark changes are instant. -
I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard. So how do I get my platform to use the CS6 as my default instead of the CC one.
Sign in, activation, or connection errors | CS5.5 and later
And you can change the default program for a file type under File --> Info.
Mylenium -
If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)
That's not what home sharing is for or how it works.
You want the remote app.
Maybe you are looking for
-
How to open front panel of a VI running in RT.
Hi, I have an application to read the encoder position using the cRIO program. I have made an executable and this application runs as startup application whenever the controller reboots. Right now, i am accessing the VI of the startup exe through Rem
-
I am trying to send my client some .m4v files to load into WIndows iTunes and onto an iPod and the cant get it to work...we are in different towns. I sent the .zip file (containing an little 3 minute .m4v movie) up to my FTP server. They have no FTP
-
Naming Photo 'Rolls' imported directly from a camera
Does anyone know if there is there anyway of naming the 'Rolls' to a title of your choice? I've had a fiddle with this but it screws up the Rolls as I guess the ROLL file which contians the number of that roll references the Roll folder in DCIM/IPOD_
-
YTD summaries in date range param report
The notion is simple enough: I need running YTD totals (not really YTD, but Year to a specific date) to display next to total fields selected via a date range parameter. For instance: For 5/1/2008 to 5/31/2008 Driver--Fund1-- Total name Trips
-
Assign an Diagnostics Agent to two System Types
On my system I have installed SAP using a C-name but the database which is on the same server uses the physical server name. The server has the diagnostics agent installed but when I go to managed system configuration I am only able to assign that a