I have 2 MSI 8600 GTS SLI. Only one is recognized in NOT SLI.

Hello, 
Please help me.
I have 2 charts MSI 8600 GTS SLI. Only one is recognized in NOT SLI.
The ESATA_LED1 is extinguished, in SLI or NOT SLI. 
The LED 1,2,3, are lit, in SLI or NOT SLI.
In SLI the switch card is in SLI Mode (x8/x8) and SLI Bridge Card is clipé: the LED6 is
extinguished, the LED4 and 5 are RED and the chart in slot PCI_E4 EAST
is perfectly RECOGNIZED.   
In NOT SLI the switch card being in (not-SLI Mode (X 16) the chart in slot PCI_E4
does not appear nowhere.   
Neither in the config panel, neither by the scan of Ma-config.com, nor by Everest.
And, of course, the screen connected on this second chart does not receive a signal.
The config off my pc is :  http://ma-config.com/AfficherResume-19211-1.html 
I thank very much for the help off receive.
armand

Quote from: armand jadot on 01-April-09, 04:24:48
- the second PCI Express x 16 slot (PCI_E4) is a special design that supports PCI Express x 8 mode only.
- the second PCI Express x 16 slot (PCI_E4) only supports to install graphics card in SLI mode.
Is this possible that one can exclusively use this motherboard only for the SLI system?.
And no for 3 or 4 screens ?
I say you a new  big thanks for your respons. 
armand
Yes its only for SLi, read the second line carefully:
the second PCI Express x 16 slot (PCI_E4) only supports to install graphics card in SLI mode
My board, P6N SLi platinum, has the same, I too can only use the second slot for SLi.
Inserting a card and not using switchcard results in no show for second card.
And if I do use switchcard and use another graphicscard, say a 8600GT in slot one and a 8800GT in second slot, results in BSOD or blank screen.
Maybe someone else here knows how to use 4 screens on your P6N SLi V2, if thats what you want.

Similar Messages

  • Only one epub file will not open in ADE or on my Nook. The others I downloaded will open on both and will copy to the Nook as usual.

    I download epub books from Overdrive. Only one epub file will not open in ADE on my Mac or on my Nook. The many others I've downloaded will open on both and will copy to the Nook as usual. Using the latest edition of ADE. Could be a corrupted ePub file? Curiously, this is the second time I've downloaded this epub from the same site, and I had no problem the first time. It still has 9 days remaining in the borrowing period.

    Forgot to make clear that on both my Mac and the Nook, attempting to open the epub causes ADE to crash.

  • Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

    Hello,
    I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
    thanks,

    Hello:
    You will need to delete the keyboard from the other Mac.  Simply disconnecting it leaves it still paired with the first Mac.
    Barry

  • I have faces in my iPhoto but only one shows on my iPad 2. why?

    i just bought an ipad  and want to have all my photos on the pad. the trouble is that only one of the people in the faces section appears in itunes. Why?
    and any ideas on how to solve this?
    Clive

    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

  • HT1386 I have been syncing my IPad to only one PC computer successfully for over a year.  Now when I try to sync I get the message that the ipad is synced with another computer and can be synced with only one.  How can I correct this?

    Although I have synced my ipad to only one PC computer I now get the message that it is synced to another computer and only one computer sync is permitted.  I have lots of apps on the ipad and do not want to loose everything by starting fresh with the ipad.  How can I get the ipad to again accept my computer and sync successfully?

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • The 16G IPOD catalog entry should have in bold THIS THING HAS ONLY ONE CAMERA.  I bought one for my dad thinking it was same as the last one i bought.  my fault, but also theirs.

    I just ordered a new 16G iPod touch for my dad.  the bigger models said they had an hd camera, so i assumed this one did not BUT AT LEAST HAD A REAR FACING CAMERA.
    So it arrives and he says it only has one camera and I say of course it has two cameras.
    it turns out just a front-facing camera (so i guess thats what Facetime camera meant).
    so now he wants to return it
    be careful ordering. my fault, but also theirs.  it's like selling a car without a windshield.  their should be a giant sign that says, this thing has only one windshield

    Disagree for three reasons:
    1) this is a KEY feature that was removed from prior models.  removing something that cutomers depend upon requires more than burying in a cryptic spec.
    2) even spec does not use clear generic terms like "front-facing camera" "rear-facing camera" or "has one camera" - instead it used Apple-terms like Facetime camera and isite camera, which on a casual glance appears like just upgrade/downgrade camera version.  16g model says facetime camera, and cell next to it it says isite camera (instead of also showing both models have facetime camera on the same row) and that's not a proper comparison grid, comparing  apples to apples, so to speak...
    3) you presume every person that orders finds this page (which i contend is not clear).  i don't want to spend an hour learning what apple-jargon translates to "this model has only  one camera"
    No reply needed.  Just posting for awareness.  I am guessing there will be more dissatisfaction and returns for this product, so just giving you feedback.

  • HT1766 i have backed up my information, however only 25 of the 80 notes from my phone tgransferred to the i pad, how do i get the rest

    I backed up my I pad however only 25 of the 80 notes transferred to the I pad. How do I get the rest?

    I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store).  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.
    The simple software "lock" used on iPods should not prevent you from off-loading the song files.  Once the song files are on your computer, you can add them to your iTunes library.  Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
    NOTE:  For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen.  The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

  • One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

    Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
    This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
    Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

    Do you have any ad-blocking software?
    Those links have ad in the url that might trigger such software.
    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Anybody have an "MSI K8N Neo4/sli and?

    Just a quick question, my cpu temp goes down when a fan is blowing over the mobo, do you guys have the sam prob? I get like 36ilde 40 load w/o a fan and 32/36 with a fan. I normaly dont have a fan because I have water cooling.
    Edit: the temps are at stock speeds with a athlon 4000, and when I overclock it to 2.9hgz, the temo goes up 2/3degrees. And I got better temp oon air, about 34/38, with a Thermaltake heatsink.
    Oh, and before somebody asks if I have platinum or diamond, niether
    http://www.msicomputer.com/product/p_spec.asp?model=K8N_Neo4/SLI

    The temp sensor itself is inside the die of the CPU, the external IC that makes useful data out of this is the Winbond W83627THF.
    It is located on the very "top right" edge of the board right by the power connector and the memory slots.
    picture from Hardocp(chip at lower right):
    http://www.hardocp.com/image.html?image=MTEwNzMxNTk1OEc0eDNITDVkeFVfMV81X2wuanBn
    Honestly I am not sure the exact point where the "heating effect" comes from.  Wheather it's the actual heating of the Winbond chip or the traces on the way to the chip run too close to something hot.  Either way the lack of air circulation on the top half of the board when using, for example water cooling, creates the "false temperature" readings.  Obviously the more pressing issue besides false readings, is the fact when not using air cooling, we are removing cooling from the VRM's, RAM, etc, etc which can easily shorten their life and/or produce instability.

  • HT204085 Does the keychain have to be set up from only one Apple ID or can it be used among 2 or more Apple ID users? For example, my daughters each have I'd but my cc is on their accounts and my wife also has her own id with my cc.

    Can the keychain from my phone and Apple ID link to 2 other different phones and Apple ID's and 1 new ipod and different id? Both daughters and wife use my credit card on their accounts. 

    We do this in my family now.  We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores).  Each iDevice has this configured.
    Then, each of us has our own iCloud account that is configured under Settings/iCloud.  That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup.  That Backup piece is pretty sweet and comes in handly if you replace your iDevice.  You can just restore from it.
    So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
    In answer to what iCloud does for you: http://www.apple.com/icloud/features/
    Think of it as an internet based ("cloud") area for all of those items listed in my response.  What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures.  Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures.  1000 may not stretch as far as it sounds.
    Message was edited by: Michael Pardee

  • When I download photos, I right click on the photo, then "save as", the browse opens and I select a folder. I then have a number of problems usually only one at a time:

    sometimes they come in a zip file, which I really don't know what to do with, so I have unzipped it to a picture folder which leaves an entire folder within a folder. That also leaves an empty zip folder in my pictures.
    The craziest thing and most unwanted as well, is that although I have downloaded only a specific file, the folder fills with photos that I have only looked at in my browser...tons of them! Most are unrelated to each other as well as viewed on different dates.
    Sometimes, the file extension is an unknown file type to me at times (sorry can't find an example).
    I have only tried to download pictures from FaceBook to date.
    I apologize for not understanding some computer basics - which probably are the causes of most of these problems. I have read most of the literature for Firefox, but a lot is above me.
    I really hope that you can help me and that my LONG description and information is just a pain.
    Thanks in advance

    On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
    Regards
    TD

  • I have tried to limit calendar to only one item on notifications screen (ios 8), and even to turn it off, no joy.

    The Calendar seems to show on the notifications screen, with room for 3 entries, regardless of settings.  Any way to limit it to one, or get it off the notifications screen?

    You're talking about two different things: notifications and widgets. The lock screen will only show notifications that you've enabled to show there. When you open notification center, there are two views: "Today" and "Notifications." Today shows widgets. That is where you see the calendar with room for events. It is basically a preview of your upcoming calendar. Under notifications is where you will get notifications if upcoming appointments that have reminders. The settings for each screen are different.
    To control your calendar notifications, go to settings--notifications--calendar.
    To control the widget, pull down notification center and select edit.
    You can turn off the widget but still receive notifications in notification center and on your lock screen or vice versa.

  • Once I have my picture from iphoto into the print mode and select contact sheet only one pic shows up not a multiple of that one picture. Help

    I have selected one picture from iphoto then went to print where i selected contact sheet...the one pic showed up on the contact but was unable to fill the sheet with the multiple of the one picture

    The root level of the drive that is mounting.  Like this

  • Possible for POJO to have a set of children with only one table?

    I have a situation that I'd like to model with Hibernate, but I'm not sure how to proceed.
    I've got two objects: Filter and Criterion. Filter has a java.util.Set of Criterion children.
    I currently have a schema with two tables: FILTERS and CRITERIA. The FILTERS table has nothing more than a primary key. CRITERIA has a foreign key relationship with FILTERS. I have a FilterDAO that will query the FILTERS table and bring back a Filter object that will use the one-to-many, parent-child relationship between the two tables to populate the Set.
    A DBA here has pointed out that the FILTERS table is anemic - it has nothing more than a primary key. She suggested that I eliminate it and go directly against the CRITERIA table to populate that Set.
    I'm so used to thinking about these things in terms of primary/foreign key relationships that I'm not seeing how to accomplish this with Hibernate. Is it a mere <set> declaration that populates the child java.util.Set<Criterion>? The WHERE clause would have to include a filter type. Is that where the JOIN has to come? Is the two table schema absolutely necessary, or can I get away without it?
    Hibernate allows the object model to be more fine-grained than the schema. The classic example is a PERSON table that has address information it in. I can model this on the object side using Person and Address classes and ask Hibernate to fetch the Address state as a component. Is this the same situation as my Filter and Criterion?
    Sorry if I sound confused, or if the question rambles. I guess I don't understand Hibernate well, because any time I get off the beaten path I fall into a hole.
    %

    Well, you're more advanced than me with Hibernate. I'd be very surprised if that were true, DrClap. 8)
    I can't even get one-to-many relationships working the
    way I'd like, every time I think I have it right
    (i.e. just the same as the examples) it gives me some
    guff about backreferences not existing.I'm finding Hibernate to be a bit difficult, especially when I don't have control over the schema. Our DBAs don't seem to follow all the "best practices" that Hibernate recommends.
    So my advice might not be the best. But if you don't
    have the Filters table, but you still need to get all
    the Criterions with "filter key" = x, then isn't that
    just a Query? Sure, you get the data back as a List,
    but you can wrap that in a Set pretty easily.I've gone back to the DBA and concluded that we have to have a FILTERS table (there's a FILTER_TYPE descriptor field that I've added). It's back in, so the 1:m with CRITERIA should work fine.
    But it begs the question: Does Hibernate and O/R mapping demand at least one table per object?
    If I look in "Hibernate In Action" on page 92, it says "A major objective of the Hibernate project is support for fine grained object models" - more classes than tables. There should be an adjective "persistent" applied to classes in that phrase, because I can have many more classes that are not persisted.
    So I take this to mean that the limit is one persistent class per table, but never less. True?
    %

  • In the ticket section, I have two Open Ticket options. Only one works

    How can I remove the Open Tickets option that does not work? I can't find the settings that would let me remove that entry.
    This topic first appeared in the Spiceworks Community

    First select the Move Tool
    Drag the source picture to the tab of the destination picture
    The tab will open to reveal your destination picture, do not release the button yet, but drag the move tool onto the destination picture.
    Then release the mouse button.
    Tell me how you did.
    Gene

Maybe you are looking for