I have 2 printing problems

1. I AM UNABLE TO PRINT WIRELESSLY FROM MY LAPTOP
2. WHEN I TRY TO PRINT FROM MY DESK TOP, I GET THE ERROR MESSAGE: "INK SYSTEM FAILURE" AND THE CODE 0xc19a0023. I AM INSTRUCTED TO TURN THE PRINTER OFF THEN ON, HOWEVER THAT DOES NOT SOLVE THE ISSUE.

OK, for the wireless issue run the HP Network Diagnostic from http://www.hp.com/go/tools.
For the other problem see the page here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

I have a printer problem error timeout

ERROR: timeout
OFFENDING COMMAND : timeout
STACK:
what can i do

re
ERROR: timeout
OFFENDING COMMAND : timeout
STACK:
I incurred same error message — inclusive accompanying printed page (with each print session). In my case the issue was with printer manufacturer's driver. I phoned (OKI) and their rep emailed a driver download link (oddly enough — same driver I had been using). In my case, downloading and (re)installing the driver resolved the error.
Aside: OKI rep explained that they (OKI) were aware of this anomaly re OKI driver/MAC OS X 10.10 and were working on an updated driver.
Good luck.

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Leopard printing problems on several printers (Am I the only one?)

Since installing Leopard shortly after it was released, I've had flakiness with printing:
- With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
- When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
The printers that are permanently in my Printer List are:
Canon i9100
Brother MFC-8840
Epson Stylus Photo 220
HP LaserJet 1320N
HP LaserJet 8800
HP LaserJet 6570
HP Color LaserJet 5550
Adobe PDF 8.0
All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
http://discussions.apple.com/message.jspa?messageID=7013209#7013209
I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
Thanks,
David

I'm having exactly the same problem with a Lexmark C760.
When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

Printing problem using HP Laser 3015 with OS 10.4.11 on MacBook

Pauses when printing a set of PDF files on my HP Laser 3015. It takes forever to print a set of documents. This is not working for my business where sometimes I have anywhere from 60 to over 100 pages to print out 2 sets! Last week I printed out the first set that took a long time and copied the second set. Printer worked fine with the old reader. I would like to have that back!! But can't find it in my application folder. Can someone tell me how to get an old reader if there is not a solution to this printing problem.
I reviewed all the settings on the print box and can't find the problem. I've read what to do in Adobe's help but it didn't tell me anything I already was doing. Does anyone have a solution to my problem? I sure would appreciate it.
Diana

I have had printing problem too many days ago.
As far as I am concerned you may try the following: -
- Verify your acrobat reader is up to date.
- Verify your printer drivers if missing any.
- Verify there shouldnt be any paper jam in the printer.
- Verify your printer is connected properly.
Verify that you have ink colors
- In the printer.
[spam link deleted by host]
If these didnt help than it may be your printer problem, you may fix it show it to any hardware shop.

Printing problems with Adobe SC3 on iMac 27"

I have a printing problem: When I want to print something from any of Adobe CS3 applications they suddenly crushes. I work on new iMac 27” (Intel Core i5, 3,2 GHz, OS X 10.9.2). Adobe CS3 worked correctly on my previous Mac G5.

Mylenium, thanks for replying!
All Adobe Standard products I have: Illustrator, InDesign, Photoshop make problem with printing.
When I get an order to print a page either on my Epson Stylus printer or PS printer application crushes.
Dario Apostol

Adobe Reader Printing Problem

I have a PC with Windows XP SP3. When I try to print a PDF document, I get the following message: "The document could not be printed. There were no pages selected to print." Of course, I had selected the pages to print.
Recently, I had many problems with Adobe Reader 10, so I removed it and reloaded Adobe 9. Today, when this printing problem appeared, I did a restore on my computer, taking it back a few months. I still have the printing problem.
Any idea what's wrong? Any idea how to fix it?

I have Acrobat Pro 9, but the feature I am using is listed under my
printers.
If I go to Print, then in the drop-down list of printers, I have PDF -
which essentially creates a new PDF document. I don't really understand
why it worked, but it did. The Print - PDF is also available to Word,
Publisher, etc.
Hope tis works.
Darlene M. Stoops
Corps Ministries Communications Consultant
The Salvation Army Territorial Headquarters
Canada and Bermuda Territory
NOTE: New phone number 416-467-3306, or extension 3306. Visit our websites
for news, updates, and program ideas!
                                                                                From:       Lindsay_MP <[email protected]>
To:         Darlene Stoops <[email protected]>
Date:       05/17/2011 11:40 AM
Subject:    Adobe Reader Printing Problem
Do you have Acrobat Pro 9? I can't find how to Print to PDF under File.....

Printer problem on Tiger 10.4.11-MMIntel

having successfully verified and repaired my disk permissions i was faced with two problems. i work in Hebrew and Arabic and after the repair i could not type either in Hebrew or Arabic. However, i went into "Internationl"turned off Arabic and Hebrew closed, re-opened International,chose the appropriate Hebrew and Arabic and it now seems to be working.
But now i cannot print. i went into the printer/fax preferences and 'de-chose' my printer closed and then 'tried' to 're-chose'automatically shows up 'Adobe PDF 8.0 and the I chose my printer HP LaserJet 5MP and I receive a message 'client-error-request-value-too-long' and i close it but my computer won't print.
The HP LaserJet 5MP is of the '8' pin technology so i am using an 'Asante-Bridge' running it thru an Ethernet port w/AppleTalk with basically no problems for two years now.
Any suggestions?
Another question: i want to go over to Leopard. Will i have any printer problems with the setup i now have?
IMPORTANT: i have an external Firewire HD which I can bootup from and still print.
Thanx.
Safed

i want to go over to Leopard. Will i have any printer problems with the setup i now have?
Only thing I can say/add at this time, if you go to Leopard, make sure your Firewire drive isn't Prolific PL-3507 based... Leopard refuses to writeto, or boot from them.

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

Ever since Firefox did an update I have printing problems. Prints partial pages and spreads out over several sheets. I use Mac OS X 10.4.11

Ever since Firefox did an update I have printing problems. Prints partial pages and spreads out over several sheets. I use Mac OS X 10.4.11

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

Looking to buy an ipad but the only problem is that the printer that i have only prints using a wire. is there a product that i can buy so i can use the same printer??

looking to buy an ipad but the only problem is that the printer that i have only prints using a wire. is there a product that i can buy so i can use the same printer??

It might be less hassle to buy a new printer.
List of supported AirPrinters.
   http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
There are iPad Print Applications supplied by printer manufactures -- usually free. Check for your prineter.
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Software for your computer's printer:
Mac and Windows
FingerPrint
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Makes any printer AirPrint® compatible so you can print from an iPad® or iPhone®.
    Reportedly works for any router.
    http://www.netgear.com/landing/genie/default.aspx

My photos no longer print out in good quality since the latest iPhoto update to 9.5.1. This is happening with photos that have previously printed out at a large size with no problem.

Since the upgrade to the latest version of iPhoto the photos no longer print in good quality. They appear crisp and in good focus on the monitor, then when they go to the page where they get edited and printed from, they go blurry. This is happening with photos hat I have previously printed out in large format ith no problems. I have looked at Preferencces but don't see anything about setting photo quality. Any ideas??

At that size all you're getting is about 100-120 dpi. 300 dpi is considered most desireable for prints. Do you have a 4x6 print of the same photo made before you upgraded to 9.5.1 and Mavericks to compare with?
OT

Printing Problem Pages- When printing, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing.

Hi there, I wonder if you can help me,
When printing, on Pages 09, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing. ScreenShots are below.
Thanks for your help, in advance.
Then......(after it has frozen, for about 2mins).....
Cheers!

IS
Do you have the same problem with printing from other apps, such as TextEdit? Have you looked at your printer's control panel to see if an error condition is displayed there, and if so, what is it?
Jerry

Printer help: i have a scanning problem

i want to scan something on to my computer but i dont have a color cartridge and it wont let me do anything with out shouldnt i beable to scan even tho i dont have a printer cartridge? i have a pscc 1600 series and an ibook g4. thanks.

Hi dee digi
That is somewhat presumptuous of the HP-PSC 1600 to prevent you from doing a colour scan because the colour ink cartridge is empty.
This is of course a HP problem not an Apple problem so the solution lies with them.
However are you aware of an updated HP driver being available from HP as there is some problem dealing with the printer cartridge and they recommend installing it.
HP PSC 1600 and 2350 Series - Print Cartridge Stops Working with an Error; and Preventing Cartridge Errors Whether this fixes your problem I don't know, but they say it is required. If you still have no luck, then either replace the cartridge as it wants or call HP and see what they have to say.
regards roam

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

I have 2 printing problems

Similar Messages

Maybe you are looking for