I have 2 problems that I need help with please?
I had an iPhone 4 1 year ago and I ended up swapping it for an iPhone 4S.. I made a new apple ID. But I can't remember if I synced my notes with iCloud on my old apple ID, so I signed in with my old apple ID which was connected with my iPhone 4 that I swapped and I seen that all of my old contacts were synced and 1 reminder were synced also but when I clicked on notes it said that I needed to create a iCloud email, so I did...it made the notes visible and there was no notes in there. Nor in the iCloud mail thingy... Which is a good thing because I didn't want my notes synced, I just want to know does that mean they were never synced ... Or are they lost somewhere? Oh and all my iTunes backups are deleted too.
And my next question.
Is it possible to call apple to get my apple ID deleted? I think someone is using!
- The notes, if they were in iCloud would be associated with the account used to create them. This you would have to log the iPod into that iCloud account
- Contact Apple about deleting the account
Contact iTunes
Similar Messages
-
I have a REAL problem that I need help with
many thanks to kglad for all his help last week with a problem but it hasn't fully sorted it out. I have a site with 908 buttons. Basically a person clicks a button, makes a donation (through paypal) and then that button gets their name displayed when the mouse hovers over it. Essentially the button becomes the property of the person who makes the donation. The problem I need help with is how to disable each button when someone clicks it. Disabling a button isn't the problem. I need it disabled only when the person has made a valid donation. Each button has a unique instance name (b001 - b908). There must be a way.
Many thanks in advance.I can't get this to work at all. At this stage, I'm considering a complete restructure of the site in dreamweaver.
I would love to be able to complete it in actionscript though as I would be learning something new.
When a user clicks a button, and goes through the paypal process, I need the clicked button to be disabled.
It has to be such that it gets disabled only when a user has made a donation through paypal. For example, plenty
of people may just click on the buttons as they are checking the site out, without any intention of using the paypal
facility. This is just human nature. Obviously, I don' t want any buttons disabled under these circumstances.
I was thinking, do I need a statement such as .......... "on returning from paypal, disable the clicked button"
Or is it just a case of......... "on returning from paypal, remove the event handler"
Or is it something completely different, I require, (please don't say a brain would be helpful).
Is there some generic code out there that could help me out please. -
This is more of a suggestion than a problem that I need help with....
Why doesn't iTumes for Windows use a year long re-download policy such as RealArcade when you purchase a game? I've lost a ton of music during a driver upgrade that went bad. I had to trash my hdd & start over... and I was under the impression that I had created a backup of my music using Nero Burning Suite. But after attempting the restore, I found out that the Nero Suite doesn't do anything for the 8.3 file extension overlaod issue. Some programs will not recognize embedded folder names and files passing 256 characters for the path/ name of the file. I would like to be notified when something like this is available for the general public. I have spent a bit of cash with the iTunes store, and I would like to be able to get (at least once more ) my money's worth. I understand that this is not Apple's problem, but it would go a long way to providing superb customer service.
Thanks for listening.I hate to sound preachy, but Apple warns customers to back up.
Why do I need to back up my music library?
In rare cases, you can ask for a re-download. Try customer service:
iTunes Customer Service -
Need to switch my @me to iCloud but have a cluster. Need help/advice please
Hello all, I want to switch over to icloud but have a real apple id cluster on my hands. LOL I have one that was used many years ago before i owned any apple products to create an itunes account. I can sacrafice this one. I have one for my iphone and ipad and i have another for my @me account i set up last year. I do not want to lose the @me one i setup. How do i go about setting up the icloud account? Do i use the @me account to transfer and then am i able to pull the other stuff from the other apple id account that controls my iphone/ipad/mac ????? I wish apple would just let you merge accounts. Heck, i would pay for it !!! LOL Thanks for any help you guys are able to give me. Im sitting here just not knowing where to start.........Terry
You can't merge Apple IDs. If you want to keep your current @me.com email address, your only option is to move that account to iCloud and continue using that one for all Apple services in the future.
For iTunes / AppStore purchases made in the past using an old Apple ID you'll just have to continue logging into that account to update the apps whenever necessary. You can't move purchases from one account to another. -
I have 2 problems with Photoshop Elements 12 that I need help with
The problems:
1) When I bring photos into the editor to work on them and then save them they are not automatically appearing in Organizer
2) When I make changes in Organizer (eg adding or deleting photos) the changes do not appear in Adobe Revel. When I make changes within Adobe Revel they are appearing in my Organizer
I have all the latest versions of Elements 12 and Revel downloaded
Any suggestions?John,
Looks like you already have 12.1 version installed.
Have you tried restarting revel agent from Edit>Preferences>Adobe Revel?
Do you see an orange icon next to Mobile albums header in left panel?
Regards,
vaishali -
2 Questions That I Need Help With...
I'm in the process of reimporting some 3000 plus cds onto a new hard drive, after my last HD crashed. The files were retrieved for the most part, but I want to upgrade them to a higher bit rate on a different HD. Am doing it on same lappy that I began this ardous process. That lappy died on me, yet I was able to retrieve my original iTunes playlists and library (38k songs and counting) after installing 6.0.4.2 (I think my prior v. was 2-3 upgrades earlier.)
I've noticed however, that the CD info is set back to its original state; minus my customizing it. Each album I've imported, I list the artist's name in the album title; ex. Aaron Hall: The Truth. Additionally, CDDB has some of the most atrocious spelling mistakes this side of my posts (lol) which I corrected before I originally imported the cds, and now they are back to their atrocious state. Is there ay way to correct this, so I don't have to manually retype everything that I originally did. It's not just spellings that bother me, I have plenty of greatest hits and compilations that I spent hours and hours looking through my Billboard research books, Discogs, Allmusic, etc., trying to be as accurate as possible, and it really scares me now to know that I have to go back into the iTunes library to regather this data. (for some reason when I go from album screen back into my library scree, the library screen goes back to the full library, and not to the screen with the album I had just been looking at.)
Second, the screen that shows what cd is being readied to be imported shows 5 columns and has them so bunched up that I have to increase the width of several of them. Also, I have to go into the view options section in edit and add the year column which I insist on. But it never seems to keep that screen for all cds, meaning I have to go into edit to view options every time I import a cd. So basically, is there a way that I can customize that screen so the columns are a longer width and the year shows up each time, instead of having to do this each and every time I pop a cd into the drive to ready it?
Also, I apologize in advance for this being too wordy, and probably missing the letter N in some of the words. I forgot to tell the tech to fix that letter on my keyboard [rolls eyes]Syncing of playcounts and other stats can be a bit temperamental. Resetting the device may help. I'm afraid I don't follow the behavior of chapterized podcasts, but it is likely that it changed with the last firmware update and that is just the way it works now, assuming of course that the podcast producer hasn't changed their workflow.
tt2 -
An Oracle data pump situation that I need help with
Oracle 10g running on Sun Solaris:
I have written a unix shell script that exports data into a dump file(data pump export using expdp). Similarly I have import script that imports the data from the dump file(import using impdp). These are not schema exports. In other words, we have logically divided our schema into 4 different groups based on their functionality (group1, group2,group3 and group4). Each of these groups consists of about 30-40 tables. For expdp, there are 4 parfiles. group1.par, group2.par, group3.par and group4.par. Depending on what parameter you pass while running the script, the respective par file will be picked and an export will be done.
For example,
While running,
exp_script.ksh group1
will pick up group1.par and will export into group1.dmp.
Similarly,
exp_script.ksh group3
will pick up group3.par and will export into group3.dmp.
My import script also needs the parameter to be passed to pick the right dmp file.
For example,
imp_script.ksh group3
will pick up group3.dmp and import every table that group3.dmp has(Here, import process does not need par files - all it needs is the right dmp file. )
I am now faced with a difficulty, where, I must use Oracle's dbms_datapump API, to achieve the above same(and not expdp and impdp). I haven't used this API before. How best can I use this API to stick with my above stategy -- which is, I eventually need group1.dmp, group2.dmp, group3.dmp and group4.dmp. I will need to pass table names that each group contains. How do I do this using this API ? Can someone point me to an example, or perhaps suggest ?
ThanksOr atleast, how do you do a table export using dbms_datapump ?
-
I have 2 computers and need help with ITunes I'm New!
I recently bought an iPod mini and have downloaded the iTunes to put music onto my iPod. This is on my main computer. Now I want to carry all of these songs over into my library which is empty onto my labtop and continue to put songs onto it. I have already downloaded iTunes for my labtop and everytime I go to plug in my iPod, iTunes opens automaticly and this message appears The iPod is linked to another iTunes music library. Do you want to change the link to this iTunes music library and replace all existing songs and playlists on this iPod with those from this library? I click no and this is wear I am at. If you understand could you please help me. Thanks
If you want to use the iPod with more than one computer, you need to change to manual transfer as outlined here.
Using the iPod with more than one computer. -
JMF Datasource problem..i need help with this one error
This the error i get when i try to run my program
Error: Unable to realize com.sun.media.amovie.AMController@18b81e3Basically i have a mediapanel class that initialize and play the media as datasource
import java.awt.BorderLayout;
import java.awt.Component;
import java.io.*;
import java.net.URL;
import javax.media.*;
import javax.swing.JPanel;
import java.nio.ByteBuffer;
public class MediaPanel extends JPanel
InputStream stream;
String name = "";
ByteBuffer inputBuffer;
byte[] store = null;
public MediaPanel( InputStream in )
try{
this.stream = in;
//store stream as ByteBuffer
store = new byte[stream.available()];
stream.read(store);
inputBuffer.allocate(store.length);
inputBuffer.wrap(store);
//get contentType
DrmDecryption drm = new DrmDecryption();
name = drm.naming;
setLayout( new BorderLayout() ); // use a BorderLayout
ByteBufferDataSource ds = new ByteBufferDataSource(inputBuffer,name);
// Use lightweight components for Swing compatibility
Manager.setHint( Manager.LIGHTWEIGHT_RENDERER, true );
// create a player to play the media specified in the URL
Player mediaPlayer = Manager.createRealizedPlayer(ds);
// get the components for the video and the playback controls
Component video = mediaPlayer.getVisualComponent();
Component controls = mediaPlayer.getControlPanelComponent();
if ( video != null )
add( video, BorderLayout.CENTER ); // add video component
if ( controls != null )
add( controls, BorderLayout.SOUTH ); // add controls
mediaPlayer.start(); // start playing the media clip
}catch(Exception e){}
} // end MediaPanel constructor
} // end class MediaPanelThe ByteBufferDataSource class is use to create the datasource for the player
import javax.media.protocol.ContentDescriptor;
import javax.media.protocol.PullDataSource;
import java.nio.ByteBuffer;
import java.io.IOException;
import javax.media.MediaLocator;
import javax.media.Duration;
import javax.media.Time;
public class ByteBufferDataSource extends PullDataSource {
protected ContentDescriptor contentType;
protected SeekableStream[] sources;
protected boolean connected;
protected ByteBuffer anInput;
protected ByteBufferDataSource(){
* Construct a ByteBufferDataSource from a ByteBuffer.
* @param source The ByteBuffer that is used to create the
* the DataSource.
public ByteBufferDataSource(ByteBuffer input, String contentType) throws IOException {
anInput = input;
this.contentType = new ContentDescriptor(
ContentDescriptor.mimeTypeToPackageName(contentTyp e));
* Open a connection to the source described by
* the ByteBuffer/CODE>.
* The connect method initiates communication with the source.
* @exception IOException Thrown if there are IO problems
* when connect is called.
public void connect() {
sources = new SeekableStream [1];
sources[0] = new SeekableStream(anInput);
* Close the connection to the source described by the locator.
* The disconnect method frees resources used to maintain a
* connection to the source.
* If no resources are in use, disconnect is ignored.
* If stop hasn't already been called,
* calling disconnect implies a stop.
public void disconnect() {
* Get a string that describes the content-type of the media
* that the source is providing.
* It is an error to call getContentType if the source is
* not connected.
* @return The name that describes the media content.
public String getContentType() {
return contentType.getContentType();
public Object getControl(String str) {
return null;
public Object[] getControls() {
return new Object[0];
public javax.media.Time getDuration() {
return Duration.DURATION_UNKNOWN;
* Get the collection of streams that this source
* manages. The collection of streams is entirely
* content dependent. The MIME type of this
* DataSource provides the only indication of
* what streams can be available on this connection.
* @return The collection of streams for this source.
public javax.media.protocol.PullSourceStream[] getStreams() {
return sources;
* Initiate data-transfer. The start method must be
* called before data is available.
*(You must call connect before calling start.)
* @exception IOException Thrown if there are IO problems with the source
* when start is called.
public void start() throws IOException {
* Stop the data-transfer.
* If the source has not been connected and started,
* stop does nothing.
public void stop() throws IOException {
}i have a SeekableStream to manipulate the control of the streaming position.
import java.lang.reflect.Method;
import java.lang.reflect.Constructor;
import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.BufferUnderflowException;
import javax.media.protocol.PullSourceStream;
import javax.media.protocol.Seekable;
import javax.media.protocol.ContentDescriptor;
public class SeekableStream implements PullSourceStream, Seekable {
protected ByteBuffer inputBuffer;
* a flag to indicate EOF reached
/** Creates a new instance of SeekableStream */
public SeekableStream(ByteBuffer byteBuffer) {
inputBuffer = byteBuffer;
this.seek((long)(0)); // set the ByteBuffer to to beginning
* Find out if the end of the stream has been reached.
* @return Returns true if there is no more data.
public boolean endOfStream() {
return (! inputBuffer.hasRemaining());
* Get the current content type for this stream.
* @return The current ContentDescriptor for this stream.
public ContentDescriptor getContentDescriptor() {
return null;
* Get the size, in bytes, of the content on this stream.
* @return The content length in bytes.
public long getContentLength() {
return inputBuffer.capacity();
* Obtain the object that implements the specified
* Class or Interface
* The full class or interface name must be used.
* The control is not supported.
* null is returned.
* @return null.
public Object getControl(String controlType) {
return null;
* Obtain the collection of objects that
* control the object that implements this interface.
* No controls are supported.
* A zero length array is returned.
* @return A zero length array
public Object[] getControls() {
Object[] objects = new Object[0];
return objects;
* Find out if this media object can position anywhere in the
* stream. If the stream is not random access, it can only be repositioned
* to the beginning.
* @return Returns true if the stream is random access, false if the stream can only
* be reset to the beginning.
public boolean isRandomAccess() {
return true;
* Block and read data from the stream.
* Reads up to length bytes from the input stream into
* an array of bytes.
* If the first argument is null, up to
* length bytes are read and discarded.
* Returns -1 when the end
* of the media is reached.
* This method only returns 0 if it was called with
* a length of 0.
* @param buffer The buffer to read bytes into.
* @param offset The offset into the buffer at which to begin writing data.
* @param length The number of bytes to read.
* @return The number of bytes read, -1 indicating
* the end of stream, or 0 indicating read
* was called with length 0.
* @throws IOException Thrown if an error occurs while reading.
public int read(byte[] buffer, int offset, int length) throws IOException {
// return n (number of bytes read), -1 (eof), 0 (asked for zero bytes)
if ( length == 0 )
return 0;
try {
inputBuffer.get(buffer,offset,length);
return length;
catch ( BufferUnderflowException E ) {
return -1;
public void close() {
* Seek to the specified point in the stream.
* @param where The position to seek to.
* @return The new stream position.
public long seek(long where) {
try {
inputBuffer.position((int)(where));
return where;
catch (IllegalArgumentException E) {
return this.tell(); // staying at the current position
* Obtain the current point in the stream.
public long tell() {
return inputBuffer.position();
* Find out if data is available now.
* Returns true if a call to read would block
* for data.
* @return Returns true if read would block; otherwise
* returns false.
public boolean willReadBlock() {
return (inputBuffer.remaining() == 0);
}can u send me ur DrmDecryption.java file so that i can help
-
To anyone who can help me out. I have never spent so long on a piece of code in my life.
But it refuses to work.
This code takes scanner-input for Strings and then tells user what days of the month theyre in.
I followed the format for the looks and strings by the letter but its not compiling.
import java.util.*;
import java.util.Scanner;
import java.io.*;
public class DaysInMonths2 {
public static void main(String[] args){
Scanner myScanner = new Scanner(System.in);
Boolean isLeapYear;
String InputText = "";
String[] thirtyone = {"January", "March", "May", "July","August","October","Decemeber"};
String[] thirty = {"June", "September", "November"};
String[] february = {"February"};
System.out.println("Month. Eg. February");
input = myScanner.next();
for (int index = 0; index < thirtyone.length; index++)
if (input.equals(thirtyone[index]))
daysineachmonth = 31;
for (int index = 0; index < thirty.length; index++)
if (input.equals(thirty[index]))
daysineachmonth = 30;
if (daysineachmonth==31)
System.out.println ("31!");
if (daysineachmonth==30)
System.out.println ("30!");
for (int index = 0; index < february.length; index++)
if (InputText.equals(february[index]))
System.out.print("Leap year (true/false)? ");
isLeapYear = myScanner.nextBoolean();
if (isLeapYear) {
System.out.println ("29!");
if(else) {
System.out.println ("28!");
}What the....ykilani wrote:
Man come on you are so close.
Hints:
if(else) <--- HAHA funny
daysineachmonth <---- declare it.
inputText/myScanner confusion. <--really bad man, how could u confuse these two... dont mix ur codes up anymore.Why are you talking to yourself?
I see nothing posted by any of the previous repliers talking about "daysineachmonth" nor "inputText/myScanner", so I have to conclude that you are making fun of yourself as you are the only one who posted anything about those items.
Did you forget to login as another screen name to make it appear like someone else was making fun of you? Are you trying to commit duke star fraud? -
A few issues i need help with please
Im running SBS 2008, replaced all hard disks in raid as there were some faults just to eliminate these.
The main problem is users are disconnecting from exchange quite often and its quite imporatant that they receive there emails on time, if they use web access this isnt a problem.
I will list below some of the event logs from the server anymore info needed please ask and thanks in advance.
I have also run Fix my network and this doesnt return anything
Im also running AVG email server edition.
Log Name: System
Source: bowser
Date: 10/22/2014 11:21:42 AM
Event ID: 8003
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SERVER.****.local
Description:
The master browser has received a server announcement from the computer KATHRYNLTOP-PC that believes that it is the master browser for the domain on transport NetBT_Tcpip_{3CEA2B1D-7E6D-4B3F-BAA0-0C1FE5201DFC}. The master browser is stopping or an election
is being forced.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="bowser" />
<EventID Qualifiers="49152">8003</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-22T10:21:42.803Z" />
<EventRecordID>3174712</EventRecordID>
<Channel>System</Channel>
<Computer>SERVER.****.local</Computer>
<Security />
</System>
<EventData>
<Data>\Device\LanmanDatagramReceiver</Data>
<Data>KATHRYNLTOP-PC</Data>
<Data>NetBT_Tcpip_{3CEA2B1D-7E6D-4B3F-BAA0-0C1FE5201DFC}</Data>
<Binary>000000000300320000000000431F00C0000000000000000001000000000000000000000000000000</Binary>
</EventData>
</Event>
Next one
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 10/22/2014 11:21:02 AM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SERVER.****.local
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server karen-pc$. The target name used was cifs/MARTAPC.wrmsol.local. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target
server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target
service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password.
If the server name is not fully qualified, and the target domain (****.LOCAL) is different from the client domain (****.LOCAL), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
<EventID Qualifiers="16384">4</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-22T10:21:02.000Z" />
<EventRecordID>3174709</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>SERVER.****.local</Computer>
<Security />
</System>
<EventData>
<Data Name="Server">karen-pc$</Data>
<Data Name="TargetRealm">****.LOCAL</Data>
<Data Name="Targetname">cifs/MARTAPC.****.local</Data>
<Data Name="ClientRealm">****.LOCAL</Data>
<Binary>
</Binary>
</EventData>
</Event>
Next one
Log Name: Application
Source: Microsoft-Windows-Winlogon
Date: 10/22/2014 6:16:45 AM
Event ID: 4005
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ****.wrmsol.local
Description:
The Windows logon process has unexpectedly terminated.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Winlogon" Guid="{DBE9B383-7CF3-4331-91CC-A3CB16A3B538}" EventSourceName="Winlogon" />
<EventID Qualifiers="49152">4005</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-22T05:16:45.000Z" />
<EventRecordID>1102726</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>SERVER.wrmsol.local</Computer>
<Security />
</System>
<EventData>
<Binary>1F000000</Binary>
</EventData>
</Event>
Next one
Log Name: System
Source: Microsoft-Windows-HttpEvent
Date: 10/22/2014 5:00:00 AM
Event ID: 15301
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: SERVER.wrmsol.local
Description:
SSL Certificate Settings created by an admin process for Port : 0.0.0.0:50106 .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-HttpEvent" Guid="{7b6bc78c-898b-4170-bbf8-1a469ea43fc5}" EventSourceName="HTTP" />
<EventID Qualifiers="32768">15301</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-10-22T04:00:00.207Z" />
<EventRecordID>3174439</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="72" />
<Channel>System</Channel>
<Computer>SERVER.****.local</Computer>
<Security />
</System>
<EventData>
<Data Name="DeviceObject">\Device\Http\ReqQueue</Data>
<Data Name="SocketAddress">0.0.0.0:50106</Data>
</EventData>
</Event>I just removed AVG 2013 from a customer site on Monday this week after their server encountered critical Exchange issues (ms exchange transport wouldn't stay running). The removal of AVG was painful and required the AVG supported removal tool.
Post removal their SBS is running without issue, Exchange processes are now all resolved.
I'm not saying at all that your issue is related to your AVG installation, but you might try removing the product to see if it is somehow related to your situation. If removal resolves client connectivity, then you have a pointer at least and you can get
support from your software vendor to get the product reinstalled! And if you've still got issues, well at least you've ruled out one item that isn't causing it...
It's where I would start. Hope that helps,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP -
Simple sum query I need help with please
I need a query to do something like this:
select customer_site_use_id
from ar_payment_schedules_all ps
where ps.status = 'OP'
AND NVL(ps.receipt_confirmed_flag,'Y') = 'Y'
and exists (select (sum(ps1.acctd_amount_due_remaining) as amtdue)
from ar_payment_schedules_all ps1
where ps1.customer_site_use_id = ps.customer_site_use_id
and amtdue < 0)
and ps.customer_site_use_id = 1593
I may be making this too difficult. I don't know if I need the exists clause and the second select statement. In the exists statement, if the sum of all of the acctd_amount_due_remaining in ar_payment_schedules_all for the same customer_site_use_id is less than 0, then it is in the results.Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle you're using.
I'm pretty sure you don't want an EXISTS sub-query. EXISTS returns TRUE if the sub-query finds any rows; it doesn't matter how many, or what's on them.
Perhaps you want something like this:
WITH got_total_amount_due AS
SELECT customer_site_use_id
, SUM (acctd_amount_due) AS total_amount_due
FROM ar_payment_schedules_all
GROUP BY customer_site_use_id
SELECT ps.customer_site_use_id
FROM ar_payment_schedules_all ps
JOIN got_total_amount_due td ON ps.customer_site_use_id = td.customer_site_use_id
WHERE ps.status = 'OP'
AND NVL ( ps.receipt_confirmed_flag
, 'Y'
) = 'Y'
AND ps.customer_site_use_id = 1593
AND td.total_amount_due < 0
;That gives you access to the total amount for each customer_site_id -
I need help with Analytic Function
Hi,
I have this little problem that I need help with.
My datafile has thousands of records that look like...
Client_Id Region Countries
[1] [1] [USA, Canada]
[1] [2] [Australia, France, Germany]
[1] [3] [China, India, Korea]
[1] [4] [Brazil, Mexico]
[8] [1] [USA, Canada]
[9] [1] [USA, Canada]
[9] [4] [Argentina, Brazil]
[13] [1] [USA, Canada]
[15] [1] [USA]
[15] [4] [Argentina, Brazil]
etc
My task is is to create a report with 2 columns - Client_Id and Countries, to look something like...
Client_Id Countries
[1] [USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexico]
[8] [USA, Canada]
[9] [USA, Canada, Argentina, Brazil]
[13] [USA, Canada]
[15] [USA, Argentina, Brazil]
etc.
How can I achieve this using Analytic Function(s)?
Thanks.
BDFHi,
That's called String Aggregation , and the following site shows many ways to do it:
http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Which one should you use? That depends on which version of Oracle you're using, and your exact requirements.
For example, is order importatn? You said the results shoudl include:
CLIENT_ID COUNTRIES
1 USA, Canada, Australia, France, Germany, China, India, Korea, Brazil, Mexicobut would you be equally happy with
CLIENT_ID COUNTRIES
1 Australia, France, Germany, China, India, Korea, Brazil, Mexico, USA, Canadaor
CLIENT_ID COUNTRIES
1 Australia, France, Germany, USA, Canada, Brazil, Mexico, China, India, Korea?
Mwalimu wrote:
... How can I achieve this using Analytic Function(s)?The best solution may not involve analytic functions at all. Is that okay?
If you'd like help, post your best attempt, a little sample data (CREATE TABLE and INSERT statements), the results you want from that data, and an explanation of how you get those results from that data.
Always say which version of Oracle you're using.
Edited by: Frank Kulash on Aug 29, 2011 3:05 PM -
I have a TBI and need help using ADOBE products
I was injured/blown up by a suicide bomber in Iraq. I have a brain injury. I am no longer the sharpest knife in the draw. My brain does not follow along like it used to, and I need someone with some patience to help me go through some Adobe proucts to that I may learn them, and yes.. I can learn them... if someone will help me. The tutorials are exceedingly difficult/impossible for me to follow and make my head want to come from together.
I have the following products that I need help with please:
CS5 Premium
Photoshop Elements 2.0
Creative Suite 5
Visual Communicator 3
Acrobat 9.0 pro
I am not rich.. I am on a fixed income but am willing to pay whatever I can if you will help me.
[email protected]First, you have my thanks and respect. I wish I had time to dedicate to helping you.
I do try to treat my own customers in my business as I would want to be treated. It's amazing the number of people who come back after I answer their queries with comments like "Wow, it's nice to get a real person to answer, and quickly too!"
-Noel -
Need help with uploading web gallery
When I try to upload a gallery, I recieve the following error message: An error occured sending the file: a response was not received in time.
How do I correct this?Find the exported gallery on the hard drive, and open the index file in a web browser. If that works correctly, then yes, it's a problem that you'll need to discuss with your web host, rather than a Lightroom problem that we can help with, sorry.
Maybe you are looking for
-
How to track a Material Code in MM with a Fixed Asset number?
Hello Gurus! is there any t-code or way to track or link a material code generated in MM with its related fixed asset nummber? < removed by moderator - anybodies discussion is equally important > Thanks Message was edited by: Jürgen L
-
I need to change my Photoshop licence from PC to Mac, appreciate advice
Could you advise me please. I have a DVD/ROM copy of Photoshop CS6 for PC and am going to change to an Apple MAC in December 2014 or January 2014. I understand from the Cambridge Apple Store that it is possible to "migrate" the licence provided it is
-
Can a java code interact with trigger
Hi guyz , is there any way by which a trigger can interact with JDBC ? I want to check the database each time its updated and if some condition is violated , the info((row from table which has voilated some rule) is passed to java code which can then
-
Recently I was given an eMac that had been sitting in a cupboard for a couple of years.; When I tried to power it up I was getting all kinds of noise at first. I checked all connections that I could, then checked that the memory was correctly inserte
-
Its not my ipod because its the same when I have them plugged into a computer. I have tried cleaning it, other people have listened to it and have said the same thing. As far as I know there has been no damage to them and the are still under warrenty