I have 2 user names ID's and can't get iTunes match on my iPhone

I purchased iTunes Match so I could listen to my library on my iPhone.  However, my iTunes user ID is different than my iPhone user ID. When I go to "settings" on my iPhone and select "ON" for iTunes match, it says I haven't purchased it.  What can I do? There doesn't seem to be a way to merge the accounts and I'm afraid if I abandon one for the other, I will loose all the information associated with that ID.  Can you help?  Thanks in advance.

Last night I just made a new library and imported the old library into the new one. That took care of the problem. Not sure why I was able to import and not access the library, but whatever. It works.
To follow up on your question, I could see the iTunes folder via Finder and iTunes, but when I tried selecting the folder nothing would happen. The drive is connected to my airport and is seen as a network attached storage.
Thanks

Similar Messages

  • Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

    Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

    You must be signed into the mobile iTunes Store using the same Apple ID you used to originally purchase iTunes Match. On the iOS device go to Settings > iTunes and App Stores and tap the Apple ID. Log out, then log in with the correct ID.

  • I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    I have a gen 3 ipod and can't get it into disk mode.  In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself.  Any ideas?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha

    I have
    Windows XP, 32 bit and can not get the flash player to load
    . Do not know what version I had to start with. When I
    try to load the 10.3 version it gets to 50% then tells me
    to close the Internet explorer and bartshel!
    If i do this then there is nothing left to load.
    I tried to save it to my desktop but then itt says no active thread foun
    d. How do I load it without my Internet being open and a
    dobe site up and running when it tells me to close them?

    Thanks the address you gave me gave me what I needed but still had alot of trouble with the game. Come to find out it was my browser IE8 that was causing all the problem. So I changed to google chrome and loaded the regular version of Flash player and have been able to get on the game. Now i have trouble with my plugins can you send me a link to find Adobe flash player plugin 9.0.124.0?
    Date: Tue, 6 Sep 2011 19:39:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha
    Hi,
    Could you download the appropriate version of the installer from the following page?
    http://forums.adobe.com/thread/889580?tstart=0
    Once downloaded, please quit all of your browsers and launch the installer.  If it still fails, please restart your system and try again.  Let me know how it goes.
    Thanks,
    Chris
    >

  • HT3258 I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan.

    I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan. It works with the macbook pro and iPad. The dialog box states "Setting up 'BrotherMFC-J4610..." Unable to communicate." I worked with the AppleCare guy for a couple of hours. We got it to print via USB but when we switched to ethernet hook up via Time Capsule it won't communicate or install the printer.

    Try two things (separately, trying to add the printer in Print & Scan/fax prefs after each):
    Reset the printing system:
    http://support.apple.com/kb/ht1341
    Reset the router - power it off for 15 secs, then back on. Some routers cause these kinds of errors - not recognizing devices are present.

  • TS1363 I have windows 8  and itunes 11.1 ... it identifies my iphone 4 but insists that I either update my phone to OS 7 or restore to by basic 6.1.3 OS  I don't want to do either.  How can I get  itunes to access my iphone ?

    I have windows 8  and itunes 11.1 ... my laptop identifies my iphone 4 but  itunes insists that I either update my phone to OS 7 or restore to by basic 6.1.3 OS  I don't want to do either.  How can I get  itunes to access my iphone ?

    RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
    With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
    That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
    So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • I have downloaded 2 free books and can't get them to work, I am on a macbook pro

    I have downloaded 2 free books and can't get them to work, I am on a macbook pro

    iOS devices only.

  • I have a new mac pro and can't get a side scroll bar.  What can I do to get this?

    I have a new mac pro and can't get a side scroll bar.  How can I get this?

    The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
    In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

  • I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

    I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is still $29. You must have at least a model 2,1 MacBook.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Have Lion (10.7.3) and can't get my Time Machine to hook up???

    Have Lion (10.7.3) and can't get my Time Machine to hook up???

    Here are some suggestions for getting the best results from this site.
    Give details of the problem. A statement such as "it doesn't work" conveys no information. If it did work, you wouldn't be here. Instead, you should post something like this: "I did A; I was expecting B; but I got C instead." Include the complete text of any error messages you saw and where you saw them: in an application window, a CrashReporter window, a log, or whatever. Also include the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it?
    Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any relevant information, but it didn't help, include details.

  • How can i get itunes to recognize my iphone so i can download it and then download that into my new iphone4s???

    how can i get itunes to recognize my iphone (the first one) so i can download its info so i can then download that into my new iphone 4s.???

    Including going through all of Step 5? That can take some time, and should fix the problem. You have also removed and reinstalled iTunes following the steps in this support document? http://support.apple.com/kb/HT1923  As a last resort, see this support document. http://support.apple.com/kb/TS5376

  • I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

    I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.  I downloaded and installed latest version of itures and can't get it to start.  Any suggestions?

    Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

  • HT4914 Can you stream itunes match to an iphone or does it have to download?

    Can you stream itunes match to an iphone or does it have to download to the device?  I do not have space on my phone and just want to be able to stream.
    thank you

    Download.

  • How can I sync my various email accounts into an iCloud account.  Example.  I have an embarqmail.account.  How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices.  Thanks

    How can I sync my various email accounts into an iCloud account.  Example.  I have an embarqmail.account.  How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices.  Thanks

    You need OSX 10.7.2 or higher in order to access icloud.  The mobile me account is now defunct (it closed down more than a year ago).

  • How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

Maybe you are looking for

  • How do I make a change in a PDF document

    How do I make a change in a PDF document

  • Flex profiler: giving socket timeout error

    Hi, I am using Flex 3 Builder. With Flex 3 SDK and overlayed AIR 2 sdk. When I try profile my AIR app, I get "Socket Exception" in the console. I tried editing the mm.cfg manually but it seems not working. (Followed various posts in forums/blogs). Bu

  • Slider is locked and cannot change dock size

    The slider is locked and I cannot increase the size of the icons on the dock. Please help.

  • DR server set up

    Dears, I need to set up DR server for our PRD server.As I am new to this activity,want to get some information about it. 1-Hardware configuration should be exactly same or not mandotry. 2-During installation should we have to do something additional

  • Send As Permission | Works For One Email

    I'm trying to grant a few users Send As permission on a mailbox. In the EMC: I have granted the users Manage Full Access Permission In ADUC: I have Enabled Advanced Features, added the users to the account and Granted them Send As in the Security pro