I have 20 screen model. Came out 2008. When I turn it on it goes straight to zooming in why
HOw do I zoom out with a mouse or key board
Something in OS X is corrupted. Try reinstalling OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Similar Messages
-
i installed ios 7.after that my primary cam, one day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?
This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's. The lens mechanism got stock on each of our iPhones. We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back. Now try the camera ...Fixed! It has been more than six months now and neither of our iPhones have ever experienced the problem again.
-
When i charged my phone,The plug in itune picture came out.But when i plug in my computer,the apple keep coming out and going off.So what should i do?
to me it sounds like it need repair
-
I have the mac book air and when I turn it on its a light blue screen with a flashing folder with question mark on it. Any one know how to get past it?
The MBA is trying to tell you that it is not able to find a bootable system
Either the file is corrupt or access to the storrage has failed
I would start by seeing if it will boot with Command + R depressed -
I have a new IPad Air and when I turn the screen nothing rotates anymore like it should
I have a new IPad Air and when you turn the screen it doesn't rotate anymore
First thing to check is to see if there is a circular arrow around a small lock at the top right of your screen next to the battery indicator. If there is Rotation Lock is turned on. You can turn it off in the Control Center. Swipe up from the bottom of the screen and find that icon in the panel that comes up. Tap on that icon to turn off Rotation Lock.
If Rotation Lock is not on try a reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
HT1430 my screen display has stopped adjusting when i turn it sideways. any ideas?
My screen display is not adjusting when I turn the phone sideways anymore. Any ideas?
You may have accidentally turned on Orientation Lock. From the home screen slide your finger upward to open the control center. Look at the circular icon at the top right. If it is white, they orientation is locked. Tap it to unlock.
-
MBP 13" late 2011. when I turn it on it goes to an update screen then just shuts down
Lately I had problems when I recharged the battery, charging is constantly interrupted... And now, when I turn it on it goes to an update screen, then just shuts down. O.S: MAVERICKS
PLEASE HEEEELP!
P.D: Sorry for my english.LaCalle,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the update screen now? -
When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?
Does it work OK otherwise?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable and USB port and/or charging source
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My screen is black out, how can i turn back to sceen menu?
my screen is black out, how can i turn back to screen menu?
Try restarting the iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP
Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device. Now what should I do?
Welcome to Apple Support Communities
Press Option key on boot and select the OS X partition. If it isn't here, press Command and R keys on boot, open Disk Utility, erase the drive and install Lion or Mountain Lion -
Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
I WAS USING IPHOTO AND THE POWER WENT OUT. WHEN I TURNED IMAC BACK ON IPHOTO WOULD NOT OPEN, JUST KEPT ASKING TO RELAUNCH. NOTHING HAPPENS WHEN I RELAUNCH. I TRIED PUTTING THE RECOVERING DISCS IN BUT STILL WON'T OPEN!
It also broke your cap lock. You need to get your keyboard fixed as it makes reading your posts extremely difficult and is considered shouting which is rude
You need to load your back up or make a temp backup and rebuild your library
LN -
What does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled
hi
what does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled? this phone doesnt even ring, it just goes straight to the BEEP-BEEP-BEEP, its an iphone 4 and on IOS7 and it was ringing eailier on in the day when i spoke to this person. it wouldn't mean i have been blocked would it?
what does all this mean?
thanks
mrredrunner100i got my friend to message this person to see if they had the same problem, and the message went through and i think he got a reply, and all of a sudden this has started to work again (calls only) but apparently none of my messages went through that i have sent since the block activated. and they still havent even though there working again, and "apparently" a message was sent to me at 9pm today and it has never arrived. so imessage and text still isnt working, before i go asking this person about this, is this a genuine block or is there a phone problem?
-
my iPhone has a black background and the classic rotating wheel. I try it to put it in DFU but when I turn it on it goes back in this modality and my mac doesn't recognize the phone. HELP ME!
That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period
Maybe you are looking for
-
How can I create a new database?
Hi, can anyone tell me the steps I have to do if I want to create a new database? Can I perform this operation from the console of the Enterprise Manager or from the DBA studio? Thank you.
-
Reports in .pdf , .xls files....
Hi, I have a requirement that the reports should be extracted/printed in .pdf and/or .xls files.... I know that these types of files can be generated via the use of XML Publisher... So , do i have to develop the reports using the XML Publisher only(w
-
Using Ref cursor from Procedure output in BPEL
Hi Can any body help me .. The output variable of db adapter is refcursor from stored procedure. in ref cursor i will get xml from a clob variable. how to use it in bpel...can an body help me how to do it....
-
Setting Up Logical Data Source - DBConnection_DAC
Hi There, In DAC, you have a logical data source define as "DBConnection_DAC" , The same can be used to populate a parameter value in Source System Parameters. Does any know how to set this up of test this "Logical Data Source". Thanks in advance. AJ
-
How can I receive my email again?
MY IPad stopped receiving mails last Thursday. I have tried restarting my IPad, but it did not help.