I have 3 Airport Expresses...can that help if I hook em up?

I have 3 airport Expresses...yes 3...My sons went hardwire and gave them to me....is this an advantage....can I set them up and increase my coverage in the far coner of the two story house?
How?
Thanks!

Can I reset just one Airport express and then reconnect it to the one I use as the main.
Yes. Hold in the reset button on the Express for 7-8 seconds and allow a minute for it to restart to a slow, blinking amber light.
Now you can reconfigure the Express again.

Similar Messages

Forgot password for Airport Express can you help?

I've forgotten my password, could someone help please?
Thanks

Try using something like a straightened paperclip or tip of a ballpoint pen to press and hold the reset button for one or two seconds - that will reset the Airport Express.
This from page 40 or thereabouts of the AE user guide:
Chapter 5 Tips and Troubleshooting
You Forgot Your Network or AirPort Express Password
You can clear the AirPort network or AirPort Express password by resetting AirPort
Express. Follow these steps:
1 Use the end of a straightened paper clip to press and hold the reset button for one
second.
2 Select your AirPort network.
-On a Macintosh, use the AirPort status menu in the menu bar to select the network
created by AirPort Express (the network name does not change).
-On a computer using Windows 2000 or Windows XP, hold the pointer over the wireless
connection icon until you see your AirPort Network Name (SSID), and choose it from
the list if there are multiple networks available.
3 Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh,
and in Start > All Programs > AirPort on a computer using Windows XP or Windows
2000).
4 Select your AirPort Express and click Configure.
5In the dialog that appears, make the following changes:
-Reset the AirPort Express password.
-Turn encryption on to activate password protection for your AirPort network. If you
turn on encryption, enter a new password for your AirPort network.
6 Click OK.
AirPort Express restarts to load the new settings.

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
(66017)

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

I have 2 airport express base stations that I am trying to use to extend my wifi. I have windows 7 and downloaded the airport utility but it wont pick up my airport express. Does anyone know what im doing wrong and how to get them to work?

I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.

Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results.

I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

I have installed airport express on my Window 7 and had problem to find the airport express.
I solved the problem by turning off my AVG firewall and the airport tool found the airport express and it went steady green.
I then turned on the AVG firewall again and it continues ok.
But when I turn off and restarted my laptop I have to follow the same procedure.
The AVG firewall is set to All Allowed for the airport express.
Is there anybody out there that can give assistance to solve this problem?

Hi,
I solved the problem myself by updating the Wi-fi driver.
Now it works perfect.

I have 3 airport express units, an Ipod and a PC. I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses. The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

I have 3 airport express units, an Ipod and a Windows 7 PC. I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses. The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available. I get an error code -15000 when I try to connect from the PC to one of the expresses.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

I have the airport express and trying to connect to the internet on my Vizio and can't find a code to put in to connect..

I have the airport express and trying to set up internet service on my TV (Vizio) but having no luck.... I need a code to enter in order to connect! Can you help?

Hi - you might be getting full bars but a slow connection - games can be very sensitive to this - have you tried connecting via ethernet to see if it is better? - however if your wireless speed is good too then it could be a ps3 issue and a call to their support might help - otherwise there could be interference issues, radio channel conflicts, etc. - without knowing the specific aspects of your entire network environment it is hard to make any more suggestions.

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

Hello 84wvu,
It sounds like you want to setup your Airport Express to Airplay music from iTunes. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. AE no longer works.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. Airport Express no longer connects to my network. I have downloaded Airport Utility 5.6 to try and configure, but with no luck.

TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.

I have 3 Airport Expresses...can that help if I hook em up?

Similar Messages

Maybe you are looking for