I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Similar Messages

  • Is there a way to open new tabs on the same site without having them go to a new window?

    i like to go to article sites and open up many tabs where each tab is a new article. this allows me to quickly go from one article to the next. when i try to do this with the new firefox it opens the new tabs in a new window because they are from the same site. is there any way for me to turn that feature off?

    Do you mean the Switch to Tabs kicks in if you enter an already opened URL?
    *Switch to Tab no more: https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

  • About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

    about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

    i sue windows 7 and my orignal macintosh formated and get online same window

  • Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

    Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
    Thanks!

    goldberry wrote:
    Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
    I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

  • I have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

    i have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

    Safari is part of OS X and isn't available as a separate download. How did you get a newer version than the one that comes with Lion?

  • Is there any way to sync 20 iPads to the same account and keep their folders?

    Is there any way to sync 20 iPads to the same account and keep their folders?

    We have 2200 student iPads on our school campus. When starting from scratch they all receive one identical image and then are renamed according to their property tag (manually ). Students are then checked out their device for the school year and often move their apps around into folders. I often have some come back in to be synced, updated, etc. and I do mid-year updates to apps. As long as their names are unique I have no issues with them retaining folders when they are resented late. So basically as long as you don't mind doing the set up to each one of the 20 the first time you sync them, you can update them whenever you'd like, adding and updating apps, and you can retain folders.
    And of course there are all sorts of other options with Configurator and other MDMs. 

  • Is there a way to automatically add another of the same page while a form is being filled?

    Is there a way to automatically add another of the same page while a form is being filled?
    I have a two-page form of which the second page is essentially a spreadsheet analog.  Often, there is need for for more lines than are available on the page.  Is there a way in which to add another or even multiple copies of the second page? 
    Thanks ahead...
    TG

    You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

  • I have bought some apps for my ipad and macbook pro but why did you charge me $1 and app money ?

    I have bought some apps for my ipad and macbook pro but why did you charge me $1 and app money ?
    Thank you.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    That is determined by what type of disk that it is. It may be a disk that only allows you to install Windows on your Dell computer and would not allow Windows to be installed on a Boot Camp partitition or as a virtual machine in an app such as VirtualBox on your Mac. If that is the case, you would need to purchase a retail Windows install disk.

  • Is there a way to delete multiple pictures at the same time from the iphone4s?

    Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

    Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

  • HT201317 I add all photos taken on camera roll to individual albums. However, once a photo is deleted from camera roll, it's also deleted from the albums where it also resides. Is there a way to delete or clear out the camera roll but keep them in albums?

    I add all photos taken on camera roll to individual albums. However, once a photo is deleted from camera roll, it's also deleted from the albums where it also resides. Is there a way to delete or clear out the camera roll but keep them in albums?

    See this discussion...
    https://discussions.apple.com/message/20971818#20971818
    From the  More Like This  section on the right

  • AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I do?

    AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

    iPhone music will not respond to Play button after being paused.
    The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Is there a way to allow two users on the same itunes account to see their individual contacts and calendars

    I'm just looking for away to allow my wife and I to see our contacts, emails, and calendars on the macbook pro. We have a single itunes account, with two different iphones. How do we do this? Right now the computer only shows my wifes information.
    Thanks
    Josh

    Thanks GB,
    Ok, so I've gone ahead and setup another Apple ID for my Iphone so now we have two Apple IDs and two Icloud accounts. My Iphone is on my Apple ID, her Iphone, Ipad and Macbook Pro are on her ID.
    Could you give me some direction as to how to add my information to the Macbook Pro.
    - I'd like to be able to see my her and my calendars by clicking on the calendar icon dock.
    - Same with Email, can we see both emails by clicing on the email icon in the dock - I was able to do this on the Ipad but can't figure it out on the Macbook Pro
    - Contact would also be nice but I'm not sure its possible
    I know I could probably setup a second user on the computer, but that would mean logging in and out of user groups all the time which we don't really want to do.

  • Data Sets - Is there a way to put two fields in the same row?

    I am working on my first Spry Data Set (in Dreamweaver CS4) which, if I can get it figured out, will eventually be used as a calendar on a client's web site. You can see the beginning of the project here:
    http://www.rieradesignco.com/calendarlist_spry.html
    My question is, can I put two or more fields on one row? Specifically, I would like the part that looks like this...
    3
    [WED]
    Fusion
    ... to look like this:
    3   [WED]   Fusion
    I tried simply moving the fields (in Design View) so that they looked like they would be in the same row, but as you can see, that didn't do the trick. (You can see what I did here, in the highlighted part of the screenshot:  http://www.rieradesignco.com/spryquestion.jpg). I also tried nesting a table within the table on my html data document that contained the three fields I needed - it worked okay, but that just makes the table more difficult to work with. I don't want to simply type the three items into one field, because it will be a long list and they all need to line up perfectly.
    Is there another way to do it?

    Change the following line to include the red coloured parts
    <div class="MasterColumn" spry:repeat="ds4" spry:setrow="ds4" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">
      <span>{Dsp_#}</span><span>{Dsp_WkDay}</span><span>{Dsp_Event}</span>
    </div>
    The add the following style rule to your document:
    .MasterColumn span {
        display: inline-block;
    I hope this helps.
    Ben

  • After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    Hello there, Kishoresaraogi.
    The following Knowledge Base article provides some great steps to troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found

    Hi guys, I am getting error 'REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found ' when run the report and i m also use formula column in my report. can any body help me why it's coming. following code is used in formula column plz check

  • Applets embedded in JSP

    Hi, Another newbie question here sorry. I have the following directory structure in my web app: root_dir root_dir/JSP_dir1/JSP_sub_dir1/main.jsp root_dir/WEB-INF/lib main.jsp has an embedded apple - the markup looks like this: <applet   code="com.som

  • Home Sharing needs to be reset every time.

    I use Home Sharing to watch movies from my late 2009 iMac on my 3rd Gen Apple TV. Sometime in the past few iTunes/Apple TV updates my library stopped showing up on the Apple TV. This is remedied by turning off Home Sharing at the iMac and then turnin

  • Formating long currency field

    Hi all. I'm looking forward to format the output of a long currency field. I would like to display it without decimals and using the dot separator, for example: in database i have the value 1234567891011,1234 then display 1.234.567.891.011,1234 is th

  • Automatic workload reassignment of purchase order

    Dear experts , My customer need an option for Automatic workload reassignment of purchase group . We have the rule to determine the purchase group against product group and the price in SC. Now, we need the possibility to change purchase group in cas