I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone
On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.
I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.
Similar Messages
-
How can I change all of (or more than one) speaker note to a voice at once?
Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463 -
I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.
Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done. -
I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5721
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002FB7200B6E2500
Current user is not an administrator.
The current local date and time is 2014-01-01 16:14:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: PLDS DVD+/-RW DU, Rev
Audio CD in drive.
Found 15 songs on CD, playing time 55:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:13:47
Track 3, start time 07:40:44
Track 4, start time 11:32:54
Track 5, start time 14:33:34
Track 6, start time 18:24:06
Track 7, start time 22:00:28
Track 8, start time 25:36:27
Track 9, start time 28:47:47
Track 10, start time 32:56:24
Track 11, start time 37:07:54
Track 12, start time 40:11:29
Track 13, start time 45:02:62
Track 14, start time 48:42:65
Track 15, start time 51:56:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: PLDS DVD+/-RW DU on CDR media at speed 24X. -
Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?
If they aren't on icloud.com they are no longer in iCloud. If you don't have another backup, I'm afraid they're gone.
-
I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?
Does this involve iPhoto in some way?
-
Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!
No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.
-
How can I make all 40 audio clips the same volume?
Hello, all!
I'm finishing up a General Orientation video for new employees in Yellowstone National Park and am-this-close to being finished!
I'm creating the video in Premier Elements 9 with some video footage and some still photos blended together. (Yes, I tried to "Ken Burns" it... he would laugh out loud if he saw my version!)
I've narrated most of it in individual WAV. clips that I've inserted into the audio timeline under each video segment.
I have about 40 audio clips, and even though I used a decent microphone, I still find that each clip has a slightly different volume that is really noticeable when the video DVD plays on TV. I'm realizing that I should have made an effort to keep a standard distance from the mic when recording. Hindsight is 20-20.
I have been trying to change the volume on each clip to make them all the same volume, and it's making me a little crazy.
Is there any way for me to capture all the audio at one time and make an adjustment that would make all of them the same volume? I tried CTL-A and then did "normalize" on it, but it seemed to make very little/or no difference when viewing.
Any advice would be really appreciated!
Signed, the lone creative video girl in Yellowstone.You are most welcome, and it has been a great day. Thanks!
Good luck, and pay close attention to the differences between Clip Keyframes and Track Keyframes. They accomplish the same result, but have differences.
Good luck,
Hunt -
Okay. I recently changed my icloud storage plan to 20GB, for $0.99 a month, to have more room in my phone. After that, I realized a lot of my videos were acting up and wouldn't play. I honestly don't know what I did, nor that I can remember, but I tried to play around a little with my phone to see if anything would work again. Then I ended up storing more than HALF of my photos and videos in my icloud storage, and now I can't seem to get them back into my regular iphone stream! I can't see ANY of the pictures/videos stored in icloud, but it tells me that I have 377 photos and 16 videos stored in icloud, and 2.2GB are used, and I could only see 33 photos, and 8 videos in my phone! I want to know how I could UNDO all this, and put EVERYTHING back in my iphone storage, and OFF of icloud! icloud confuses me a lot. I'll just stick with 5GB. HELPP PLEASE!!!
And also, I want to know WHYYYYY I have to keep downloading my videos before playing them!Felixecoga wrote:
My computer is now almost 3 years old and never had any maintenance or any software cleaning whatsoever.
That's fine.
It takes forever to shut down and to star up (compared to when it was new with snow leopard) .. Some programs are now running slow (iMovie, Photoshop) and very often it just doesn’t respond so i have to turn it off the hard way loosing what I was working on.
Have you tested in a fresh user account, or in Safe Mode ?
A clean install is rarely necessary, and may not even solve the problem. If you plan to do a clean install and migrate, you defeat the purpose of a clean install.
If you do a clean install you'll also need to replace your iLife apps from the disks that shipped with your Mac, they're on Disk 2. -
How can I find all HD movies in iTunes?
Count me extremely confused by the iTunes movies user interface. Seems like every time I launch it, it's got a different interface.
1. How do I view a list of all available movies?
As far as I can tell, I am only able to view movies three ways: 1) Featured, 2) Top Charts, and 3) Genius. None of these is what I want. I simply want to go to a list of all movies available. It would be nice to be able to sort this list by Genre and alphabetically by title. Anyone know how I can do that?
2. How do I view a list of all HD movies?
When I entered iTunes today, it was showing me a list of all HD movies. No idea how or why it got into that state. The title bar up top said "All HD movies" (or similar), and there was a "Back" button in the upper left. I clicked "Back" and after reloading it showed me exactly the same UI: I was still looking at a list of "All HD movies". I clicked Back again. Same thing. I then clicked back repeatedly (out of frustration), and it ended me by showing the same less-than-useful UI it usually (but not always) does: "Featured" "Top Charts" and "Genius" buttons up top, and a "Genres" button in the upper left. How do I get back to viewing just a list of "All HD Movies"?
Bur.Lost & Found
Create a playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
Optional: It depends a bit on why things aren't where iTunes expects to find them but if they are in sensible Artist & Album folders in some common location then my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread. Once you have repaired the tracks that can be found you can drag the contents of the Lost playlist into Found which will update things.
Or, you can simply delete all the tracks in the Lost playlist with Ctrl-A to select them and then Shift-Delete to delete.
tt2 -
How can I combine all of my music into one folder for itunes
I have a PC running windows XP I have just bought a IPad 3 and I am trying to consolidate all my music into one folder on one drive so that the sync does not have a problem finding many tracks every time I connect my IPad please can anyone help.
Kind Regards
DerekHi Derek. Do you know where your active iTunes library is? If not download & run the script iTunesInfo which should output something like this:
I'm interested in the values of the first four lines. If needed you can hide your username with <User> if it's in there. Also worth checking that media folder location given by the script agrees with Edit > Preferences > Advanced. If not, let me know.
Which of your drives has the most free space? Ideally you should move your current library to that drive as X:\iTunes (when X: is the drive letter) and then consolidate all your existing content that wasn't inside the current iTunes Media folder. I can descibe what to do on a generic basis but with the details I can produce a step-by-step guide that will be easier to follow.
tt2 -
How can I put all output error message into a String Variable ??
Dear Sir:
I have following code, When I run it and I press overflow radio button, It outputs following message:
Caught RuntimeException: java.lang.NullPointerException
java.lang.NullPointerException
at ExceptionHandling.ExceptTest.actionPerformed(ExceptTest.java:72)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:291)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6038)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
at java.awt.Component.processEvent(Component.java:5803)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4410)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2429)
at java.awt.Component.dispatchEvent(Component.java:4240)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)Caught RuntimeException: java.lang.NullPointerException
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)I hope to catch all these error message into a String Variable such as StrErrorMsg, then I can use System.out.println(StrErrorMsg) to print it out or store somewhere, not only display at runtime,
How can I do this??
Thanks a lot,
See code below.
import java.awt.Frame;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.io.FileInputStream;
import javax.swing.ButtonGroup;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JRadioButton;
public class ExceptTest extends JFrame implements ActionListener {
private double[] a;
private JRadioButton divideByZeroButton;
private JRadioButton badCastButton;
private JRadioButton arrayBoundsButton;
private JRadioButton nullPointerButton;
private JRadioButton negSqrtButton;
private JRadioButton overflowButton;
private JRadioButton noSuchFileButton;
private JRadioButton throwUnknownButton;
public ExceptTest() {
JPanel p = new JPanel();
ButtonGroup g = new ButtonGroup();
p.setLayout(new GridLayout(8, 1));
divideByZeroButton = addRadioButton("Divide by zero", g, p);
badCastButton = addRadioButton("Bad cast", g, p);
arrayBoundsButton = addRadioButton("Array bounds", g, p);
nullPointerButton = addRadioButton("Null pointer", g, p);
negSqrtButton = addRadioButton("sqrt(-1)", g, p);
overflowButton = addRadioButton("Overflow", g, p);
noSuchFileButton = addRadioButton("No such file", g, p);
throwUnknownButton = addRadioButton("Throw unknown", g, p);
getContentPane().add(p);
private JRadioButton addRadioButton(String s, ButtonGroup g, JPanel p) {
JRadioButton button = new JRadioButton(s, false);
button.addActionListener(this);
g.add(button);
p.add(button);
return button;
public void actionPerformed(ActionEvent evt) {
try {
Object source = evt.getSource();
if (source == divideByZeroButton) {
a[1] = a[1] / a[1] - a[1];
} else if (source == badCastButton) {
Frame f = (Frame) evt.getSource();
} else if (source == arrayBoundsButton) {
a[1] = a[10];
} else if (source == nullPointerButton) {
Frame f = null;
f.setSize(200, 200);
} else if (source == negSqrtButton) {
a[1] = Math.sqrt(-1);
} else if (source == overflowButton) {
a[1] = 1000 * 1000 * 1000 * 1000;
int n = (int) a[1];
} else if (source == noSuchFileButton) {
FileInputStream is = new FileInputStream("Java Source and Support");
} else if (source == throwUnknownButton) {
throw new UnknownError();
} catch (RuntimeException e) {
System.out.println("Caught RuntimeException: " + e);
e.printStackTrace();
System.out.println("Caught RuntimeException: " + e);
} catch (Exception e) {
System.out.println("Caught Exception: " + e);
public static void main(String[] args) {
JFrame frame = new ExceptTest();
frame.setSize(150, 200);
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
frame.show();
}yes, I update as follows,
but not looks good.
import java.io.*;
public class UncaughtLogger implements Thread.UncaughtExceptionHandler {
private File file;
private static String errorMessage;
public UncaughtLogger(File file) {
this.file = file;
//Thread.setDefaultUncaughtExceptionHandler(this);
public UncaughtLogger(String str) {
this.errorMessage = str;
Thread.setDefaultUncaughtExceptionHandler(this);
//@Override()
public void uncaughtException(Thread t, Throwable e){
try {
log(e);
} catch (Throwable throwable) {
System.err.println("error in logging:");
throwable.printStackTrace();
private void log(Throwable e) throws IOException {
PrintWriter out = new PrintWriter(new FileWriter(file, true));
try {
e.printStackTrace(out);
} finally {
out.close();
private static UncaughtLogger logger = new UncaughtLogger(new File("C:/temp/log.txt"));
private static UncaughtLogger logger2 = new UncaughtLogger(errorMessage);
public static void main(String[] args) {
String s1 = "Hello World!";
s1 = null;
String s2 = s1.getClass().getName();
System.out.println(s1);
System.out.println(s2);
System.out.println("errorMessage =" + errorMessage);
} -
How can I get all my music files into my itunes folder?
I have tons of music scattered all over my computer in different locations, I want to put all the music in my itunes folder- C:\Documents and Settings\David\My Documents\My Music\iTunes\iTunes Music
The problem is, is when I move the music to my itunes folder the music I move does not play in itunes. So how can I do this
ThanksDon't move files manually! That indeed causes iTunes to lose track. Use the command Advanced > Consolidate Library. Before you begin, read up on Consoidate in the Help file so you understand what it does.
When you are done consolidating, you can delete the extras if you wish. -
Please tell me how to get my GPS signal back on my phone. Thanks.
And they do offer a compatible version. As I am running running Netflix on my first generation iPad just fine.
You'll need to first "purchase" the non compatible version either on a newer device that can run it or on a computer running iTunes using the Apple ID that is on the first Gen iPad.
After that is done, you should be able to go into the App Store App, and find Netflix under the Purchased Tab. Tap on it to download it and you should be warned its not compatible, but will be offered the compatible version.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919 -
When we bought our iMac, all the programme shortcuts and my files ended up migrated from our old PC to my wife's desktop. How can I get these onto my desktop which is virtually blank. I cannot even access our photos from my desktop.
Unless I have misunderstood you, your requirement is to use your desktop (presumably a Windows PC) to access files on your wife's desktop (presumably the iMac). If so, can't you allow "sharing" of the files on the iMac by going into System Preferences > Sharing" and then setting up a network connection on the PC to access these files? Alternatively, write the files on the iMac to a flash drive or CD/DVD (if your iMac has an optical drive) and then copy these to the PC.
Maybe you are looking for
-
Quicktime 7 does not seem to work properly on my system
I have juste tried installing the latest Quicktime version on my system (Asus G71Gx, CPU Intel Core2 Quad Q9000 @2GHz, RAM 6 GB, Windows Vista Ultimate 64 bits with SP2), but it never worked properly: + I am unable to view Quicktime content on web si
-
Using Apple TV as a multi-room music server
I am trying to decide whether Apple TV is a good choice for use as a multi room wireless music server. I would rather use Apple TV than say Sonos because I like Apple TV's video capabilities. My decision is going to be largely based on Apple TV's/iTu
-
Commons-logging Error when starting JRun with Flex
Created new JRun Server and deployed Flex2 to this server. Receiving this error when starting up this server instance. Starting Macromedia JRun 4.0 (Build 92909), logicerm2 server 07/13 22:23:28 info JRun Naming Service listening on *:2911 07/13 22:2
-
Cannot view pdf files on Safari
I am unable to view pdf files with Safari
-
Please Please Help Me!! Virus?
Hi all, i am afraid i have a virus and i would love someone to check my syptoms and diagnose me. On the 3|1|07 an unknown server popped up on my desktop and on futher inspection it had the name "dev". I tried to disconnect but i was told I had insuff