I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

Similar Messages

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks

Yes. Yes. Yes.
Mylenium

Can two users on the same Mac sync contacts by using the same Apple ID in the iCloud settings?

Can two users on the same Mac sync contacts by using the same Apple ID in the iCloud settings?

Hi Barney,
That's exactly what I want. I have a personal user and a business user on my MacBook Pro. I want both users to have the same contacts so if I add a contact while I'm logged into my personal user, it will show up when I'm logged into my business user. I want both contacts books to be exactly the same; like you said. So, I used my business user AppleID when I enabled iCloud for my personal user and I enabled iCloud for my business user with that Apple ID as well. For my personal user, I selected Contacts and Calendars to sync with iCloud. For my business user, I selected everything to sync with iCloud. The problem is... it didn't change anything. I restarted my computer to see if that would do anything but nothing happened. I'm not super savvy with Apple products, so maybe I'm completely confused.
Hi Xeni,
Thank you for your response, as well.
KEW

HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
please advise me,
best regards,
Ahmed

try to edit your host file ang delete any line that contain gs.apple.com

I recently purchased a time capsule and thought I would put my itunes on it as an external drive as my mac book air only has 120gb. However I can not be connected to the internet and the TC at the same time in order to download the files to the TC. Help?

I recently purchased a Time Capsule and put my iTunes library on there so that I wasn't using up my hard drive space. Only 120gb on my mac book air. However when I download songs from iTunes I can not be connected wirelessly to the internet at the same time. Can I hard wire my TC in to my mac so that I can treat the TC as just an external hard drive? Thanks

Initially, you asked if you can hardwire your MBA to the TC. The answer is yes, by using the optional USB Ethernet adapter that Apple provides. However, in order for your MBA to access the TC's internal or USB-attached HDD, it would need to establish a network connection to it. This would be true of any NAS device on an Ethernet network. Therein, lies the problem. Your MBA cannot connect to two networks simultaneously.
One option then, would be to have two separate iTunes Media folders; one on the MBA & the other on the TC. This way, you can download the music to your MBA when connected to the Internet at the AirPort lounge, and then use iTunes Consolidate Library feature to transfer the audio files to the TC's iTunes Media Folder location. A great program to help maintain multiple iTunes Librarys and/or Media Folders, that you may want to consider, is PowerTunes.

HT2488 Is there a way to highlight a lot of folders at the same time to replace underscore between the title words with a space? If it's possible can someone please explain in easy to follow steps for somebody not good with the mac .. Thanks

Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks

You need a "bulk renamer" to do this.
I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
Renamer4Mac is cheap. Check the App Store too.

Can't get two powerbooks to connect at same time

Our Airport Snow base station is connected to our ComCast cable modem. My roommate and I cannot both get IP addresses on our powerbooks (both running 10.4.10) at the same time. If I turn off my airport then she gets an IP address and can connect. If i then turn mine on the I get a self-assigned IP address and can not connect. Conversely if she turns her airport off then I can get an IP address but she subsuquently can not. Seems the Airport base station is stingy with IP addresses. ComCast tech support is no help.
BTW- the base station is not recognized by either powerbook with the airport admin utility.
We are newbies to wireless and hope some can understand my question enough to help.

I hope that someone in tech support answers this one...
As you know from reading the "Help & Terms of Use", this is a user to user discussion area and there is no guarantee that anyone from Apple will ever read this. If you want to provide feedback to Apple, use the form at http://www.apple.com/feedback/airportextreme.html
I am afraid this might have something to do with Apple trying to phase out the graphite base station...
Since that base station was discontinued in November 2001 I think you are probably correct.

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

Can't access bookmarks that overflow across the toolbar. They are there but can only get them by going into bookmarks toolbar in menu. They used to display off to side when you clicked next to last item. Can I fix this?

This feature always worked before. Then one day it stopped. Can access overflow items on bookmarks toolbar through menu, but rarely across the top. The ones that don't fit across the top can't be brought up anymore.

This feature always worked before. Then one day it stopped. Can access overflow items on bookmarks toolbar through menu, but rarely across the top. The ones that don't fit across the top can't be brought up anymore.

How can I create "drop caps" Anchored frames tool: "Run into Paragraph" in a text document, and at the same time be able to feather the text to the bottom of the pages? I´m using FrameMaker 10.

@

Presumably you are doing the DC as a single letter inside an Anchored Frame run-in from left.
Back when FM had a manual, this was the method discussed in the manual. The manual, however, also said "Framemaker does not feather text in a text frame in which text runs around graphics."
That was FM7.0. I don't know if FM has enhanced DC or feathering since then.
If I had the requirement, I might look at putting the whole lead paragraph in a borderless table.

Hello!!!I need to read some data from the serial port and processing these, at the same time I want to see the process that I am doing.

I read the data without problems, and I see them using Waveform graph, the problem is that I want to see the real time stamps, but in the graph appears 2:00:00,000 and 01/01/04, so the date and the time is wrong !!
Can I change this?
I am thinking that the problem is that I have to adquire the data and the time stamps ( using Get date/time) and after, I have to represent both!!!
Thanks!!!

Hello,
As you probably know a waveform is made of a beginning time (t0), a time difference between each value (dt) and an array of values (Y). Your problem is probably that you don't initialize t0. Use the Vi 'Waveform->Build a waveform' to initialize the time of the waveform.
Hope this helps !
Julien

Is it better to install windows on the same mac hard drive or use the second hard drive bay as it's own? Im also using deploy studio and am having trouble creating a workflow to assign the bay.

Have mac pros with 1tb drives in tem. Trying to figure out imaging via deploy studio.

For the easist install and problem solving having W7 on it's own disk would be the best way to go.
The only thing you need to do is either take out the lower # drives ahead of the future Windows disk or put the Windows HD in bay/slot #1. (or just take out all but the future W7 disk and install it manually works too)
The easiest way would be to put the W7 drive in slot slot/bay #1 then you can still use BC Assistant to install the drivers and such.
After the install you can have the Windows drive in any slot you want.
I'm not familier with Deploy Studio so can't help you beyond this.

Is it possible to stream Video to Apple TV (via Beamer with no real audio output) and at the same time stream Audio to an Airplay compatible device? (Bose Soundtouch)

I currently have the following set-up:
Ipad Mini Retina (with Airplay)
Beamer without proper audio output (picobeamer)
Bose Soundtouch (with Airplay)
Apple TV (3rd Gen)
When I stream a video via the Ipad, I either have the sound on my Soundtouch or Video via the beamer. Is there an option to have both at same moment? It really looks like I cannot have both at the same moment?
Thanks in advance.

Welcome to the Apple Community.
Unfortunately, you can't split the Airplay stream as you would like to.

I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

Similar Messages

Maybe you are looking for