I have 8GB Ram in 1st DIMM slot... can i add another in 2nd slot?
i have ordered a HP Evny 700-310xt with windows 8.1
I opted to have 8ram in one Dimm slot instead of 4ram in two slots....
I had hoped to get another 8ram module to put in the 2nd slot when my pc arrives...so i will have 16 ram, but i have a hard time to find out where i can get original parts from HP. I tried th parts store at HP no luck. I don't want to throw the 8ram away that comes with the machine and by two more ....... i want to keep the 8ram that comes with it...and add a single 8ram module.
"The part number for my 8GB memory module is part number 698651-154"
do i have to use the same exact manufacturer part?
thanks so much in advance
This question was solved.
View Solution.
Hi,
Yes, you can add 1 piece of 8Gb to the second slot to make 16Gb as mentioned:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c04344813
You can use other RAM with SAME specs but using same RAM is much better in terms of peace of mind. HP RAM may be a bit more expensive.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
DylanThe only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao. -
I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?
Have icon but cannot connect - Please Help.
Mine is Gen. 2 - Model MC572C/A. I have the YouTube icon but cannot access YouTube. Message says "No content was found - There is a problem communicating with YouTube. Try again later." This problem has been for at least 1 month now. Any ideas? -
I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....
Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe -
My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize new Laptop?
You can only deauthorize everything to do that. Click on Account under Quick Links. You can deauthorize all five there. But you can only do this once a year.
-
I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?
I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed -
we have moved over to iCloud but now we need a another email for a blog we are doing can we add another email but not alias
Welcome to the Apple community.
You can add an alias but not a second email address to your iCloud account. You can however add a second iCloud account to your iOS device (which will come with its own email address) at settings> mail, contacts calendars. -
Does ps have quick and guided mode? Or can I add this mode?
I am newbie. I have not used ps before. I tried ps elements and it's very good.
But considering I will update this sw annually, photoshop cc may be better as for price.
So I have a question.
Does potoshop cc have quick and guided mode? Or can I add this mode?No, Photoshop does not have Quick and Guided modes. There isn't Organizer in Photoshop either but you have Adobe Bridge instead.
-
i have problem with the newest itunes. i can't add lyric to my ipod through itunes. anyone know how to fix this?
On the iPod in Settings>Music do you have Lyrics and Podcast info ON
-
I have an ipod touch and I can not add apps to it as it is saying I need to update my ipod.
The trouble is when I go to General - there is no SOFTWARE UPDATE on the ipod.
What do I do to update it and be able to download apps?
Please Help!The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848
NOTE: The 2nd generation iPod Touch can not be upgraded beyond 4.2.1. -
I bought my computer 2 months ago i have 8GB ram
i have 8 GB ram and whenever i check how much im using its always using 4.5GB maybe more is this normal?
if i run parallel on it and set 4GB for the parallel how in te world will it work?Try this and see if the iPad will restart.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I would like to do this, but I just want you to know that I am not an expert so some things I would like you to be clear on.
Please watch this movie for instructions:
http://eshop.macsales.com/installvideos/imac_mid_2007_mem_m/ -
I have an hp wireless d110a printer how can i get another wep key for it to set it up?
Have a new HP d110a wireless printer how do i get or put in another key that it will take to finish setting it up to work? I need help. I had one of these before,and had to send it back, and HP sent me another one just like it. It will not take anything i put in it. How do i fix this. I went through all the steps, and it still does not take anything. Need help.
Hi,
Only you (or relatives) know your WEP key, it should be in your access point (AP), you can logon to it and check this out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
For example, there are 10 check boxes and the user selects 5 of those boxes. Then they click a submit button. Just the information from those boxes would be displayed so they can print it. Is this possible? Any help pointing me in the right direction would be appreciated.
That is definitely possible.
Option 1: checkboxes are all named differently.
In the click event for the submit button, add some code like this...
if (cbChoice1 == "1") p2.tfChoice1.presence = "visible";
else p2.tfChoice1.presence = "hidden"; //can use "invisible" if preferred
if (cbChoice2 == "1")...
Option 2: checkboxes are named the same
In the click event for the submit button, add code like this...
var checkboxes = xfa.resolveNodes("cbChoice[*]");
var textfields = xfa.resolveNodes("p2.tfChoice[*]");
for (i=0; i<checkboxes.length; i++){
if( checkboxes.item(i).rawValue == "1") textfields.item(i).presence = "visible";
else textfields.item(i).presence = "hidden"; -
5 GB SGA on 8GB RAM HP Server 64Bit
Hi all
Recently three months we installed Oracle 10g Database on HP Server (having 4 XEON Processors) with Windows 2003 (64 Bit) OS and we have 8GB RAM.
We wished to have 5500M as the SGA Target but we could not configure more that 3800M on that machine as after that it would error and the database would not get start.
error messages would be like - Out of memory
OR
???? (not recollecting)
Now we are running with only 3500M as sga_target and not utilizing the full available RAM with us. Of course we are using in addition 1500M for pga_aggregate_target without any problem. Even if we increase pga_aggregate_target to 3000M there is no problem but that is not desired to us. We wish to increase sga_target.
We are getting excellent response timings on 3500M sga_target but as human nature would be , we wish to be more greedy and use the full available RAM with us i.e 8GB out of which we can safely use 7GB for Oracle instance. While deducting 1500M for pga_aggregate_target we would like to use 5500M for sga_target.
Any help is appreciated.
Suresh BansalExcerpt from oracle docs.
Benefits of Automatic Shared Memory Management
Automatic Shared Memory Management simplifies the configuration of the SGA. Before Oracle Database 10G, buffer cache, shared pool, java pool, and large pool need to be manually specified for the database. Under sizing can lead to poor performance and out-of-memory errors (ORA-4031), while over sizing can waste memory. This feature enables you to specify a total memory amount to be used for all SGA Components (buffer cache, shared pool, java pool, and large pool). The Oracle database periodically redistributes memory between these components according to workload requirements. Before Oracle Database 10G, the user did not have exact control over the total size of the SGA since memory was allocated by Oracle for the fixed SGA, and for other internal metadata allocations over and above the total size of the user specified SGA parameters. The new SGA size parameter SGA_TARGET now includes all the memory in the SGA, including all the automatically sized components, manually sized components, and any internal allocations during startup.
Configuring Automatic Shared Memory Management
Automatic Shared Memory Management can be configured by using the SGA_TARGET initialization parameter. If you specify a non-zero value for SGA_TARGET, the following four memory pools are automatically sized:
* Database buffer cache (Default pool)
* Shared pool
* Large pool
* Java pool
If you set SGA_TARGET to 0, Automatic Shared Memory Management is disabled. The default value of SGA_TARGET is 0.
The individual parameters used before Oracle 10G releases to specify the sizes of the automatically sized components have not been made obsolete. The initialization parameters that size these pools (DB_CACHE_SIZE, SHARED_POOL_SIZE, LARGE_POOL_SIZE, and JAVA_POOL_SIZE) are now referred to as auto-tuned SGA parameters.
The following buffers are now referred to as manually sized components:
* Log buffer
* Other buffer caches (KEEP/RECYCLE, other block sizes)
* Streams pool (new in Oracle Database 10g)
* Fixed SGA and other internal allocations
Note: STATISTICS_LEVEL must be set to TYPICAL (default) or ALL to use Automatic Shared Memory Management.
Jaffar
Maybe you are looking for
-
my imessage is not working all messages are being sent to ipad
-
Connect applet to database using JDBC
I try to connect Applet to database, but have error: Access denied (Java.lang.Runtime.Permission access Class In paclage.sun.jdbc.odbc) I think the reason is the security issue, but how to implement the security issue in the code? Help me...
-
I recently tried to make a book using iPhoto06 and was not very excited about the limited options available (background patterns, ability to move photos etc). I have Aperture 1.5.6 and am satisfied with the flexibility for moving text and pics etc..
-
Aperture 3 freezes the whole computer
Upgrading to AP3 has been for me rather an obvious step. Yesterday I downloaded the trial version. It created a new library. I created a new test project, imported some 50 RAWs and started playing with it. EVERY TIME I use AP3 during making adjustmen
-
How to check Valid Email in sqlserver2008R2
Hi , I was created one application using Asp.Net, Sqlser2008 R2 , Actually I have one table named "tblRegisterUser" and have column names are id, email in Sqlserver2008 R2. id Email 1 [email protected] 2 [email protecte