I have a -1202 error when attempting to connect to itunes windows xp is up to date

I have a -1202 error and can not get onto an itunes account

OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

Similar Messages

  • There was an error when attempting to connect to the Windows Live Calendar service.

    I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message  
    There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
    Can anyone help me, no sense sending me an email, I cannot get into my email.
    Lucienne1

    Hi,
    Try installing Windows 2012 Live Essentials here.
    You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
    Are you using an Internet Service Provider Email  account or a cloud based (IMAP) Email account?
    Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
    Jaco
    ****I am not an HP employee****
    Errare humanum est.

  • I have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    i have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    The first error comes when i open my laptop:
    APSDeamon.exe -  System Error
    The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
    when I try to open Itunes, it says:
    iTunes.exe
    iTunes was no installed correclty, please re-install itunes
    Thanks!
    Annabel

  • Iphone 4 has a black screen which will display the apple logo for approx 10 seconds, then goes blank for 10 seconds and so on.  I have tried a hard reset with power button and home button but no change.  Get no response when attempting to connect to itune

    iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again.  Same action over and over.
    I have attempted hard reset but cannot complete.  Also attempted to connect with itunes and it does not recongize device.
    Device is frozen in this display loop.  Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.

    Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
    If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
    * power off your phone.
    * Hold the home button while connecting your phone to iTunes.  You should see the connect to iTunes window and your computer should give you the recover mode alert.
    *Restore your device as new. Being sure not to restore from a previous back up.
    You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored.

  • Keep getting 1202 error when attempting to redeem itunes cards

    I just fixed my 9808 issue linking to iTunes store and now I cant redeem Itunes cards from the store because of a 1202 error. What is this 1202 error and is there a fix? I am using a Dell XPS M1530 Lap Top wth a Vista operating system.

    Try to delete this folders and reinstall :
    C:\Program Files\Common Files\Adobe\Adobe PCD.
    C:\Program Files\Common Files\Adobe\caps.
    C:\Program Files\Common Files\Adobe\backup.

  • Error when attempting to play shared iTunes library

    I have two iTunes Shared libraries on my network, coming from seperate machines. I am using a Mac Mini as a media server.
    Both of my shared libraries show up on the list. When I attempt to view one of the libraries I get the following error message...
    "iTunes is not responding. Press the Play/Pause button to return to the desktop"
    Please note that one of the libraries (the much larger one) plays fine via the share.
    Any ideas?

    Do the shared libraries have passwords? If they do, then try leaving iTunes open when you go to Front Row with the library you want to use selected with password entered as if you were going to listen to it directly from iTunes.
    Ampaudi

  • Getting an error when attempting to connect Skype

    Hello.  I am using Windows Vista 32 bit
    I am attempting to connect to Skype through my microsoft account, and I am getting the following message.
    "Sometimes the internet gets a bit sleepy and takes a nap. Make sure it’s up and running then we’ll give it another go."
    I have checked my Internet Explorer LAN settings and have not been able to determine an issue.  My IE is version 9.0.8112.16421
    If there is a clue, Yahoo Messenger has also recently stopped working.
    Please help!
    Solved!
    Go to Solution.

    I just fixed this myself.  I went into Internet Explorer, the went to Internet Options - Advanced - enabled 'Use TLS 1.0'

  • I keep receiving the 3030 error when trying to connect to itunes.

    I am unable to connect to itunes on my pc running Windows 7 64bit.  I have attempted every possible fix for this that I have been able to find online.  I have also deleted all antivirus software from the machine and made sure itunes is allowed through the firewall.  I have no idea what else to try since I can't find any conflicting items.  Is this just a case of itunes not being able to run on my computer, or is there a know issue that is easy to correct and I just haven't found the solution?  Thanks for any help.

    OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

  • I get an error when trying to connect to Itunes Connect

    I recently submitted my payment for my Apple developer account and it was approved and the $99 paid.
    However when I try to connect to Itunes Connect, I get the error message:
         Apple ID does not have permission to access iTunes Connect.
    Is there something that I am missing? Thanks in advance for the help.
    -J

    You can start with this troubleshooting article.
    http://support.apple.com/kb/ts1368
    You may want to restart the iPad and restart your computer as well. You can always download the updates in iTunes on your computer and sync them that way - but that does not solve the problem - it just gets you the updates.

  • Network-related or Instance-specfic error when attempting remote connection from SSMS

    Hello,
    I have installed SQL Server express on a Win7 desktop and want to connect to it via SSMS on a laptop. I have set up a SQL login on the desktop so I can login, but when I try to connect to the instance from the laptop via SSMS I get the error 26 with saying
    there is a network related or instance specific issue and that there is an error locating the Server/Instance specified.
    I am trying to connect to a named instance on the SQL Server on the win desktop. Remote connections are enabled and TCP 1433 and UPD 1434 ports are open in Windows Firewall. Antything else I should watch for?
    Thanks

    Hi MrDAndersen,
    According to your description, you come across the errors of pre-login handshake and wait operation timing out. Please help to post the full error log for further analysis.
    Based on my research, this issue could occur when .NET Framework 4.5 and non-IFS BSP/LSP are installed on the machine, and non-IFS BSP/LSP interferes with the call to Winsock.
    To work around the issue, you could use one of the two methods below.
    1. Determine whether a non-IFS BSP or LSP is installed. You could use the "netsh WinSock Show Catalog" command and examine every Winsock Catalog Provider Entry item that is returned. If the 0x20000 bit is clear (not set), it is a non-IFS BSP or
    LSP and remove the installed non-IFS Winsock LSPs. For more information about the process, please refer to the article:
    http://support.microsoft.com/kb/2568167
    2. Download and apply .NET Framework 4.5.2:
    http://www.microsoft.com/en-us/download/details.aspx?id=42643
    There are two connect items for your reference.
    https://connect.microsoft.com/VisualStudio/feedback/details/745004/ 
    https://connect.microsoft.com/VisualStudio/feedback/details/729323
    Best regards,
    Michelle Li

  • Error message when attempting to connect to itunes store

    When I try to go to the itunes store I receive an error message that says "the network connection was reset. Make sure your network connection is active and try again". I can connect to everything but itunes store. I have contacted itunes support and they say it is a problem with my network. My ISP is HughesNet. No one in their tech support seems to know anything about a Mac. Has anyone else experienced this problem?
    Thanks!

    This is the only solution that worked for me. I tried the setting the date one year ahead, didn't work. Tried settings reset, didn't work. Tried using alternate apple ID, didn't work. This is the only thing that worked, hope it helps anyone else that other soluctions don't work.
    Thanks for the information and help!

  • Error when attempt to open Photoshop in Windows Vista, "Some of the application components are missi

    Using Windows Vista-32. Installed CS4 suite & used Photoshop and other components but randomly one day it stopped working. Clicked to open and received error, "Some of the application components are missing from the application directory, Please reinstall the application."
    I uninstalled & reinstalled entire Suite and just Photoshop several times with no success. When I reinstall, I receive error message,
    Adobe Photoshop CS4 English Language Pack
    Error:
    Error 2.
    LangPack (English) for DeviceCentral
    Error:
    Error2.
    Solutions I have used include:
      -  replacing System Color Profile library by creating a different folder on desktop...
      -  replacing Backup Key for Adobe CS4
      -  Administrators & System are listed & permissions for security are set to Full Control
    PLEASE HELP! I have assignment Due Tomorrow & Can't Access Software I PAYED Big $$$$ FOR!
    Phone support won't help w/o paying a fee???

    You've done something to your system, or it's possibly gotten a malware infection.
    You can't even reinstall Photoshop?  Have you tried completely removing it, including running the Creative Suite Removal script? 
    How recently did it work?  Have you tried System Restore?
    -Noel

  • I have a stupid error when trying to re-install itunes

    after having an error with the apple mobile device support (1067) it wiped all apple programs from my computer and tried a re-install well i keep getting this error now im stuck with an ipad 2 and ipod that cant be synced at all.. and fyi i am not going to wipe my pc clean for some pos software.

    These ones are tricky. But the following instructions are worth a try.
    First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
    b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
    c. Perform the following actions
    i. Right Click on Components Folder
    ii. Select Permissions
    iii. Select Full Control and Read Permissions options
    iv. Select Advanced Button
    v. Select Owner Tab
    vi. Select to Change Owner to the Administrators
    vii. Check the option “Replace owner on subcontainers and objects”
    viii. Select OK when prompted that it may not change all.
    ix. Select Apply
    x. Select Apply again
    xi. Exit the Registry Editor
    Now try reinstalling iTunes again. Does it go in properly this time?
    If you're still getting the 1067 after that, try uninstalling any MegaUpload software on the PC. Does AMDS launch correctly now?

  • Error when attempting to connect

    hello there. whenever i try to connect to our new airport extreme 802.11n i get a strange error that consists of an 8 digit number that's different every time, and "PIN for "`¬Ä†å""
    it fails to connect but keeps trying and completely freezes the airport menu for about ten minutes until it finally announces that it's completely failed with, "Please contact the network administrator about access to "`¬Ä†å". `¬Ä†å isn't the name of the network.
    the light on the airport is blue and it works for someone else using it, he's using a Macbook Pro (not a core duo so no N support). the administrator isn't home at the moment but i'm getting pretty frustrated with being unable to print and scan using my printer. any ideas regarding something i could do on my end?
    Macbook Intel Core 2 Duo   Mac OS X (10.4.9)  

    OK, I see what happened. I had the 10.2 client installed with the connections configured via the tnsnames file. When I then installed the DB (with it's own tnsnames file), SQLDeveloper starting pointing to that instance of the file, with none of my tns connection entries. So, I copied the tnsnames file from the client directory to the database directory, re-created my connections, and everything was fine.

  • Unknown error when attempting to connect to my speakers via airtunes

    It was working fine yesterday morning and just like that it ceased to function correctly. The airport express and the airport extreme base station are both seemingly functional. Any ideas?

    Hello,
    I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
    I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
    Chris Mayer
    The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

Maybe you are looking for

  • Hp laserjet 3055 won't scan in windows 8

    I have a HP Laserjet 3055 All In One printer/scanner/copier/fax/cusinart and it will print on my new Lenovo desktop with Windows 8 but will not scan.  It is hooked up at the computer and the HP device by USB.  Little help for a Luddite out there?

  • Project Online Task Sync with Exchange Online

    We have Project Online and Exchange Online subscriptions both part of same tenant. When we go to Tasks in Project Online and try to set up a syn with outlook, we get below error: Status: We weren't able to sync your tasks. This could be because your

  • Validations in GL Master Records

    Hi Gurus, My client wishes to have checks in creations of GL Master Records e.g. for creation of an account on putting the account group the system will check if the radio button "P and L Account or Balance Sheet Account", is correct or not, etc. The

  • When I open my photos an error occurs

    I can read all of my photos in the library, but when I double click on many of them, a blank screen pops up with an exclamation point. How can I fix this? Thanks.

  • Themes in personalization

    How to place the themes in personalization? Thanks, Prasad.