I have a 1st generation apple tv that my kids use in their tv room but the remote now will only toggle up and down. Anyone have this problem, can only acess movies and can toggle over to the side for tv shows or other content
Really frustrating. I have tried to pair 2 different remotes to see if that was the problem, but still can't toggle but up or down........ help!!
Have you restarted the AppleTV?
I have several white remotes for ATV1's and a couple have 'sticky' up buttons that require a harder press (one of these was chucked in the sunk a few years ago by my daughter), so I'm not convinced of their longevity as much as I prefer them ergonomically over the new silver ones.
Odd for two to be exhibiting the same issue which which is why I suggest restarting. If you had a low battery you'd probably be getting an onscreen warning icon.
Similar Messages
-
Hello!
Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one.
Many thanks
InjinYou need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
With iOS 8 you can use AirDrop -
HT201302 I have 3 devices that are assigned to my Apple ID that my kids use.....
I have 3 devices that are assigned to my Apple ID that my kids use and I want them to be able to purchase and update their own devices individually. How do I separate those devices onto their own accounts and not lose any of their pictures, messages, apps and music that is saved?
Try Here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
None of the quicktime videos from websites play anymore. This started yesterday. Before that I could play them all. Now none of them work. Has anyone had this problem? How did you fix it? Thanks in advance for the help!
Did you try
1, resetting the device
2, deleting all cookies / history items of Safari? -
Does anyone know how to fix a 1st generation apple tv that plays moves by frames?
My 1st generation apple tv is playing moves in frames. Does any one know how to fix this?
I have done a factory reset but did not work?
I have checked that I have the latest softwear 3.0.2. Is this the problem?Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Nothing more to me said.
Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
I have the same setup as you and don't experience a problem with it. See screenshot. -
Hi frnds,. i hav this problem can anybuddy help me....
Hi,
I want encrypt the Username Token element in a SOAPheader.so im using these...im using axis1.4
clientdeploy.wsdd_
<deployment xmlns="http://xml.apache.org/axis/wsdd/"
xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
<transport name="http"
pivot="java:org.apache.axis.transport.http.HTTPSender" />
<globalConfiguration>
<requestFlow>
<handler type="java:org.apache.ws.axis.security.WSDoAllSender">
<parameter name="action" value="UsernameToken Encrypt"/>
<parameter name="user" value="soft"/>
<parameter name="passwordCallbackClass" value="com.iport.iPortSI.iportInterface.PWCallback"/>
<parameter name="passwordType" value="PasswordText" />
<parameter name="addUTElement" value="Nonce Created" />
<parameter name="encryptionPropFile" value="crypto.properties" />
<parameter name="encryptionKeyIdentifier" value="X509KeyIdentifier" />
<parameter name="encryptionUser"
value="16c73ab6-b892-458f-abf5-2f875f74882e" />
<parameter name="encryptionParts"
value="{Element}{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}UsernameToken" />
</handler>
</requestFlow>
</globalConfiguration>
</deployment>
and my crypto.properties file in client is_
org.apache.ws.security.crypto.provider=org.apache.ws.security.components.crypto.Merlin
org.apache.ws.security.crypto.merlin.keystore.type=pkcs12
org.apache.ws.security.crypto.merlin.keystore.password=security
org.apache.ws.security.crypto.merlin.keystore.alias=16c73ab6-b892-458f-abf5-2f875f74882e
org.apache.ws.security.crypto.merlin.alias.password=security
org.apache.ws.security.crypto.merlin.file=x509.PFX.MSFT
and my crypto.properties file in sever is_
org.apache.ws.security.crypto.provider=org.apache.ws.security.components.crypto.Merlin
org.apache.ws.security.crypto.merlin.keystore.type=pkcs12
org.apache.ws.security.crypto.merlin.keystore.password=security
org.apache.ws.security.crypto.merlin.keystore.alias=16c73ab6-b892-458f-abf5-2f875f74882e
org.apache.ws.security.crypto.merlin.alias.password=security
org.apache.ws.security.crypto.merlin.file=keys/x509.PFX.MSFT
and my serverconfig.wsdd is
<service name="IportWebService" provider="java:MSG" style="document"
use="literal">
<parameter name="user" value="soft"/>
<parameter name="allowedMethods" value="*" />
<parameter name="className" value="com.IportWebService" />
<parameter name="sendXsiTypes" value="false" />
<parameter name="sendMultiRefs" value="false" />
<requestFlow>
<handler name="soapmonitor"
type="java:org.apache.axis.handlers.SOAPMonitorHandler" />
<handler
type="java:org.apache.ws.axis.security.WSDoAllReceiver">
<parameter name="passwordCallbackClass" value="com.PWCallback"/>
<parameter name="action" value="UsernameToken Encrypt"/>
<parameter name="decryptionPropFile" value="crypto.properties" />
</handler>
</requestFlow>
</service>
_now im trying to invoke my webservice Iportwebservice_
In soapmonitor i can view the sending message with encryption.
but in the serverside in PWCallback class im getting the identifier values is"01000000"
i can't get the actual username which i gave in my clientconfig.wsdd.and im getting this exception
org.apache.ws.security.WSSecurityException: General security error (WSSecurityEngine: Callback supplied no password for: 01000000)
at org.apache.ws.security.processor.EncryptedKeyProcessor.handleEncryptedKey(EncryptedKeyProcessor.java:280)
at org.apache.ws.security.processor.EncryptedKeyProcessor.handleEncryptedKey(EncryptedKeyProcessor.java:88)
at org.apache.ws.security.processor.EncryptedKeyProcessor.handleToken(EncryptedKeyProcessor.java:77)
at org.apache.ws.security.WSSecurityEngine.processSecurityHeader(WSSecurityEngine.java:279)
at org.apache.ws.security.WSSecurityEngine.processSecurityHeader(WSSecurityEngine.java:201)
at org.apache.ws.axis.security.WSDoAllReceiver.invoke(WSDoAllReceiver.java:159)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invokeService(AxisServer.java:234)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:375)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Thread.java:595)
any one help me...
thanks Dhans..You can contact iTunes support via this page and ask them why the message is appearing (on these forums we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption
-
I can't access my Numbers documents now that I have OS Mavericks 10.9.3. It says I need to buy an upgrade for 19.99 to access them. Anyone else have this problem?
If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
If you clean installed, look for your old install disks for iWork and reinstall.
They will run on Mavericks but they need to be there. -
TS3354 I downloaded a HD and SD version of the movie and can't play it on my 1st generation Apple TV
I bought a HD version of a movie and it won't play on my 720 p TV or WIndows PC, then I went back and re-downloaded the SD version of the movie. Now the SD version will play on my Windows computer, but it still won't play on my 1st generation Apple TV.
AppleTV1 can sync with 1 iTunes library - the top one listed in Settings>Computers.
Other libraries are 'shared' or streaming only, and appear under the top entry.
You basically need to remove the current iTunes library from AppleTV - select it and remove it - then adfd it again as the to 'sync' compuetr entry.
NOTE - changing the sync liubrary wipes AppleTV of data though apparently it does not delete items not yet reverse synced to iTunes. If it buggers up contact iTunes store support.
AC -
I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?
I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference? -
Hope I'm using this forum right. I purchased a 1st Generation Apple TV on eBay. Unfortunately, I cannot get it to turn on. I have another Apple TV (1st Generation) that works flawlessly on another TV. So I tried to use the new unit on this TV with same electrical cord and HDMI cable. No luck. It would not turn on. So I do not know if I have a defective unit or if there's another method of turning on the Apple TV. Again:
1. I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
2. I double checked that the electrical was correct - again, the other Apple TV worked correct.
Any suggestions on fixing this would be most appreciated.
Thank youWelcome to the Apple Community.
A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
Pause a couple of seconds after each press for the Apple TV to accept your selection.
When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
If that doesn't help, I fear the Apple TV is defective. -
I bought a movie on my 1st generation apple tv and it isn't automatically transferring to my computer so I can watch anywhere. Anyone have this problem? Is there a solution?
AppleTV1 can sync with 1 iTunes library - the top one listed in Settings>Computers.
Other libraries are 'shared' or streaming only, and appear under the top entry.
You basically need to remove the current iTunes library from AppleTV - select it and remove it - then adfd it again as the to 'sync' compuetr entry.
NOTE - changing the sync liubrary wipes AppleTV of data though apparently it does not delete items not yet reverse synced to iTunes. If it buggers up contact iTunes store support.
AC -
Why is Apple trying to phase out the 1st generation Apple TV, but they still sell shows, and movies?
Why would Apple continue to sell movies to people who won the 1st generation Apple TV, while they are obviously trying to phase it out? That is totally unfair to the original customers! The upgraded remote only works with audio content, and not video! If they are phasing it out, than they should no longer sell products to download to it! Or when they upgrade their remote app, have it work with the item that you're still making money off of! Now, I have to turn on my computer in order to listen to music with the new upgrade, whereas I never had to do that before!
Hello:
You are only talking to users here (not Apple). I suggest your direct your question to Apple HQ in Cupertino.
Barry -
I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?
I had same problem last night with a movie rental not showing up under the 'Rented' tab in iTunes/Movies on my iMac: as I had no other rentals, there was no 'Rented' tab at all.
In iTunes 11, the Downloads icon only appears next to the Search bar while there is an active download. Once any downloads are finished, the icon disappears. I had no icon so I had to assume the downloading had finished (in the previous UI you could check download progress even after they had finished).
My movie rental did, however, show up under 'Rented Movies' under the 'Movies' tab in iTunes/Devices/(select any i/device) so I knew it was somewhere in my iTunes. Yet, we couldn't access it via Apple TV.
I fiddle around for a bit, restarting iTunes, restarting the iMac, to no avail. Then I did a little housekeeping and moved a different movie I'd imported awhile ago, from the 'Home Videos' tab under iTunes/Movies. Under File/Get Info, the 'Media Kind' was incorrectly set to 'Home Video' so I changed it to 'Movie'. Thus the file was moved over into the Movies tab. Hey Presto! The Rented tab suddenly showed up, and there was my rented movie!
This is the second time a movie rental did not show up after downloading. Unfortunately my husband initiated the download so we figured he must've messed up somehow as he's not as familiar with iTunes as me. Hence we opted to download the movie under a different iTunes account, which worked the second time with no problem. Needless to say the invoice for the original download had no problem in finding us, hence we were effectively being charged twice for the same movie! We have to contact apple support (such a hassle) but hopefully they will understand the issue (that's the difficult bit) and they are usually good at refunding when they finally accept the customer is genuine in their claim.
In case anyone is tempted to critique my method, we download rentals through iTune on our computer as we had too many problems trying to rent via Apple TV. Often the movie was not available to watch for many hours after it was rented, even though we'd start 'download' halfway through the day and sit down at night to watch it! We have also had problems with movies that kept stopping during viewing because it wasn't streaming fast enough. We'd give some time and come back to viewing, only to encounter the same. One time we gave gave up and tried again the next evening, only to find the movie expired. There is meant to be 48 hours after you've started viewing to resume watching a movie. Apple's only response to this was to advise we needed a broadband internet connection to stream the movie - this was despite me already telling them we have broadband.
Anyway, I hope this helps anyone experiencing similar issues with movie downloads. -
My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.
Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden
Maybe you are looking for
-
how can two family members use same itunes download with two different apple id's? how do you change user within itunes?
-
This just started recently, since installing firefox 4. Now whenever I search on google or other search engines, when I click on a result, I am automatically redirected to another search site. Any ideas?
-
Quicktime 7.4.1 / 7.4.5 file type association
Hello, I have upgraded quickime 7.1.3 to 7.4.5. Since then, I've got a problem with the file type associations. I can add new ones without problem, but I can't remove them. when I choose the default associations, click apply, click ok. And open the p
-
With Lightroom 2, is there still no ability to choose a custom path to save files to on import based on EXIF? I use a folder hierarchy different than the few pre-defined folder paths. A July 31st, 2008 image would go to the following on import: 2008/
-
Has anyone downloaded an app from App Store it got stuck and you can't fix it I reset network and still stuck