I have a 2.4GHz DP Power Mac G5(ppc) and want to know if buying a new graphics card

I need an editing computer and don't have the money to buy a new $1500 or so system. I have a 2.4GHz DP Power Mac G5 (ppc) and want to know if it would be worth buying a new graphics card and more RAM. I'm looking at around a $300 or so upgrade. I am saving for a new computer but need a computer to edit videos for a job I have NOW. I am currently editing on a intel core duo laptop with 6 G of RAM, the computer is taking a real beating and would also like to know if the upgrade would make the G5 run faster than the laptop I am using now.

Hello,
It won't make the G5 run much faster, but we need more info please.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:    GeForce 7800GT
Type:    Display
Bus:    PCI
Slot:    SLOT-1
VRAM (Total):    256 MB
Vendor:    nVIDIA (0x10de)
Device ID:    0x0092
Revision ID:    0x00a1
ROM Revision:    2152.2
Displays:
VGA Display:
Resolution:    1920 x 1080 @ 60 Hz
Depth:    32-bit Color
Core Image:    Supported
Main Display:    Yes
Mirror:    Off
Online:    Yes
Quartz Extreme:    Supported
Display:
Status:    No display connected
And which exact G5 please.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Also, Graphics cards are slim pickings for G5s.

Similar Messages

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
On your new MacBook Pro open "Migration Assistant" in your utilities folder.
Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

Are you on CC or standalone perpetual licence?
If the former I believe you merely download LR from the CC site onto your iMac and log in and off you go.
If the latter, download LR onto your Mac from the perpetual licence site (not the CC version), install it and use the same licence number as with your PC.

I have The last version of the MAC GT 4 desktop, don't intend to buy a new on just so I can upgrade to Firefox 4 so what alternative do I have - keep using Firefox3.6 with no support or switch to

I have The last version of the MAC GT 4 desktop, don't intend to buy a new one just so I can upgrade to Firefox 4 - so what alternative do I have - keep using Firefox3.6 with no support or switch to another Browser?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Firefox 3.6 is still being supported.

I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures.

I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures. Also, how should I go about charging my computer? Should I wait until it is close to dying and then charge it?

I have had good success with HGST and Seagate HDDs. I suggest a HDD that is powered by the MBA eliminating the need for an AC cord. They now come up to 1.5 TB in capacity. In my opinion, one cannot have too much storage. If necessary, let your bank account be your guide.
Ciao.

HT204088 im from the philippines, i use to used debit card from U.A.E to purchase an application for my Apple Ipad 2, i still have pending unpaid application and wanted to pay it using a new Debit card here in the philippines but is being decline. how wil

i use to used my debit card when i was in U.A.E. Dubai in buying applications for my Ipad 2, now im in my country Philippinehand still have billing balance from my previous purchase. i used my new debit card to pay my pending balance but unfortunately my other debit card is being declined. how can i pay my pending bill? my debit card is sufficient. please help as i cannot update my applications because of that billing problem. Thanks

Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Regards.

I have a PowerBook G4 PPC and want to get it running like new.

I have a PowerBook G4 that I bought new years ago. It still works and I use it as a print server for an old Laser Writer Pro 630. It has old drawing software like MacroMedia Freehand MX and Bryce that I still use, but can't on my new machines. I'd like to go through the PowerBook and remove software that's not needed and get ride of all the associated parts. Streamline it if you will. I'm sure there's stuff running in the background that I don't need that makes it run slow. Is there some way to do that?

The big problem is a lot of web applications don't run on Powermacs. If you are willing to live with limited Java and Flash, turning those off, or using Tenfourfox as a web browser can take a load off your Mac. Keeping your hard drive less than 85% full also helps. For other tips, please feel free to subscribe to my tip*:
http://www.macmaps.com/Macosxspeed.html
for other ideas.
* Links to my pages may give me compensation.

I have a 2007 macbook with a cracked unviewable screen and want to transfer files to a new imac. Is there a way to do this?

I have a 2007 Macbook with a cracked (unviewable) screen. I want to transfer all files from the Macbook to an Imac but have no way of seeing whats on the Macbook. How can this be done??

Yes. Put the old MacBook into Target Disk Mode then connect it to your iMac using a FireWire cable. Note that if your iMac is a new one, you may need to use a FW400 (which is what the MacBook has) to FW800 adapter.
Once the two computers are connected, use the Migration Assistant to do the actual transfer.
Best of luck.

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan

I have a power mac G4. OS 10.4.11 I just got a new iphone G3S what will it take to get my phone to sync with itunes?

I have a power mac G4 OS 10.4.11 I just purchased a new iphone G3S how can I get it to sync to itunes? When I try I get a message that I need OS 10.5 can I load 10.5 on it? can I still buy 10.5 ?
CPU speed 800mhz
memory 512

Don't fret.
Find a copy of Leopard (call Apple Customer Support and tell them that you have a machine that can't run Snow Leopard).
You could also go to eBay.
After that, install it:
http://lowendmac.com/osx/leopard/unsupported.html
Leopard will run fine in a 800 MHz machine.

Power Mac G5 PPC Screen Freeze Turbo Fan Issue

Hello...
I've read most, if not all of the related posts; however, I have not seen any definitive answer to this issue.
My, almost mint condition, Power Mac G5 PPC has recently started the screen freeze, turbo fan, won't boot issue that seems to be prevalent with these models. I've tried almost all of the suggested troubleshooting fixes and have had no luck. My most recent attempt was to try and start in single-user mode (holding SHIFT + S at startup) and I received the following error screen then turbo fans: http://www.thishateofmine.com/Assets/photos/appleCPUpower.jpg
Remember...this is a PPC, so why am I getting an error referencing Intel CPU Power Management? This leads me to believe the OSX 10.5.8 I've been running has installed system resources for non-existent CPU's and is causing a conflict. This would be a major coding error on Apple's behalf, would it not?
I never had this issue when running any previous OS version and this computer had been running spectacularly.
It has only been used in my clean, smoke-free, home recording studio and if it werent' for a few blemishes left by external HDD's, this computer could pass as brand new. There is very little internal dust and I have kept it clean with electronics approved compressed air. I have not removed anything to get at the PSU area for cleaning, though.
If I could get it to boot from the original DVD's and install up from Panther, I would. Based on the error message I'm receiving, I do not believe this is a logic board, RAM, CPU, etc... issue. The computer will boot into open firmware and function fine, but not the OS; therefore, this would be an OS problem, right? Is that not a logical mental path?
This HAS to be a known issue and have a resolve that is NOT logic board and/or CPU replacement related.
Any help would be greatly appreciated.
BTW...please read this as a positive communication from a frustrated (knowledgeable enough to be dangerous) user. I just want my G5 back.

After plugging in the G5 PPC, as it had been unplugged for several days, here are last night’s efforts:
With only the original, main Hitachi Deckstar 400GB HDD in slot 1, I attempted to boot normal, boot holding SHIFT + COMMAND + V, boot holding COMMAND + S and boot to the original install DVD, all with no joy. In my original post I incorrectly stated I was attempting to boot into single-user mode by holding SHIFT + S, which resulted in the screen displaying the OP’s linked image. In attempting to boot into (actual) single-user mode and verbose mode, I get two different text messages – and have taken screen photos, but have not been able to upload yet – both of which stop with “DART enabled” and then do nothing else with no cursor capability, only to result in turbo fans and having to hold the power button down to shut down.
Next I ran (again) the Apple Hardware Test from the original install DVD and everything passed.
Feeling confident the hardware is all in working order, I used my brother’s Macbook Pro 3.1 (OS v10.6.8) as the host to mount the G5 PPC in target disk mode. The PPC’s HDD mounts up with no issues and everything is accessible, so I shut down and swapped the original HDD with a 500GB Western Digital Caviar SE16 that did not have an OS on it, restarted to AHT DVD and ran test again with everything passing.
Now I reconnected the target disk mode setup, formatted the PPC’s WD HDD and installed Leopard on it while in TDM from the MBP3.1. Everything installed, restarted will still TDM connected, MBP3.1 started up with the PPC’s HDD as the startup disk, went through all the typical initial install information and registration and voila I’m back in target disk mode with the PPC’s HDD as my boot disk and MBP3.1’s HDD on the desktop. Everything’s accessible, functions and looks good.
Keeping in mind I’m only dangerously knowledgeable regarding computers, I’m thinking I should be able to shut everything down and now boot the G5 PPC from the internal WD HDD I just installed the OS on, right? Wrong. All I get is the infamous folder with a flashing question mark.
Help!!! (…please???)
BTW…as it has been mentioned in a few posts, but is one thing I have not done yet, I thought it worth mentioning. I have not replaced the internal battery, but the last time I was able to get the computer to boot to the internal HDD and run for a short period of time, after being unplugged for several days, I did have to re-enter time, date, location, etc… info. The actual last time I got it to boot, I did not do this, as it only got as far as loading the desktop before freezing, but the time was correct. Didn’t get a chance to check date and location, as it froze almost instantaneously.

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a 2.4GHz DP Power Mac G5(ppc) and want to know if buying a new graphics card

Similar Messages

Maybe you are looking for