I have a 2006 iMac with an upgraded 640 gb hard drive. I seem to to be out of space, but if i add all the items, I get a different (100 gb!) answer than the Finder. Why?
I have a 2006 iMac with an upgraded hard drive, 640 gb. recently i've noticed that the Finder keeps saying I only hve 12 gb available. it lists 18 items under macintosh HD and if (using Get Info) you add up those 18 items I only come up with just over 500 gb of space. Where the other 140 gb's??
Here are some links as there are too many answers for this general question:
Where did my Disk Space go?
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html
OmniDiskSweeper is a good program to see what's taking up space: http://www.omnigroup.com/products/omnidisksweeper/
Similar Messages
-
I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
Feeling vulnerable. Please help.
SusaninNYFrom the menu bar, select
▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock. -
I create about 25 -50 new bookmarks daily for my business. So, it would seem user friendly to put that command at the top of the scroll down list. Maybe I am unique and others want to "show all bookmarks" repeatedly. I can't understand why one would need to do that more often than add multiple bookmarks on a daily basis. i look forward to your response,. Respectfully MC
cor-el, as you said, that solution puts the "show all bookmarks" all the way at the bottom. How do you either make "bookmark this page" first without changing the order of the other options or force "show all bookmarks" to be second instead of last, the way the menu was before?
-
I
I have a WD drive that won't "mount". Tried repairing, turning off and back on, unplugging and nothing has worked. Can anyone help?The WD Passport has no independent power supply, relying instead on getting power from a USB port on the computer. AS the drive ages it can need more power to spin the platter and many USB ports on notebook cannot provid that much.
Anther issue is the WD drive itself. WD uses an odd proproprietary formatting scheme that makes the drive not always behave like typical Mac drives.
If the drive contains nothing you need to access, use Disk Utility to reformat it to "Macintosh Extended (Journalled)"
If the drive contains important data, there are a couple of inexpensive ways to get more power to it:
1) Get a "Y" conenctor cable like this:
http://eshop.macsales.com/item/OWC/USB2AYMBPB/
It draws power from two USB ports and ofter that is enough to make the drive work.
2) Get a powered USB Hub:
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
It has its own power brick and that is usually enough to get an older USB external drive recognized. -
I have an iPad 3 with 64 GB of storage. I am out of space, but when I add up my movies music and apps, my usage isn't even close to 64GB. I used to have about a dozen movies. One day they were just gone and couldn't sync back on. I used to think it was a syncing problem, but it is storage. I have done a hard restart. I have deleted some junk from "memory". I have tried to "clean up" my iPad, but I am missing a ton of space. Is there a trash can that I need to empty? Are my movies still stored but inaccessible? I have read forum posts about an "other" category in stoarge which I don't see on my iPad. Not sure what else to try.
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
An "other" larger than aboutn 1 1/2 GB usually indicates that the "other" includes corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see: -
Time Capsule - OS Upgrade and External Hard Drive
Hi, This is my first request and am happy to have found this community helpful so far. It has answered many of my previous questions because somebody else had already asked. However, this time I’m not able to get all the answers since I have specific questions. Please help.
I have a Macbook (late 2008 Aluminum) with 2GB memory, Intel Core 2 Duo, 2 GHz running Leopard. I just went and bought these to start an upgrade project–
a. CD for Snow Leopard
b. Time Capsule
c. 4 GB memory (2*2GB)
d. 1 External Hard Drive – 1 TB Seagate GoFlex (running out of space in 160GB macbook)
I will buy these applications via Mac App Store after I have the OS upgrade:
e. iPhoto ‘11
f. iMovie ‘11
I have successfully connected time capsule and configured it as my router and have set it up as the time machine backup device (what a breeze!). Also, I have taken the first full backup of macbook and am ready to go. Before I go ahead with next steps, I have few questions:
Should I install the new memory first and then Snow Leopard or doesn’t matter?
Any advice for my memory upgrade? I found the instruction manual in Apple’s site and am planning to do it myself.
Any advice for my Snow Leopard upgrade or anything to be cautious about? I believe the instructions after I pop in the CD will be self-explanatory.
After I have done the Snow Leopard Upgrade, I believe I will still have access to my files in the time machine backup in TC from before the OS upgrade? The reason I ask is I am planning to delete/move files after the OS upgrade.
FYI – After the Snow Leopard Upgrade, I will upgrade to iPhoto ’11 and iMovie ’11 from ’08. I have the latest iTunes.
After I have Snow Leopard, iPhoto/iMovie ’11, I will connect the EHD to the TC USB port and am planning to move the iTunes Media and iMovie project/events to the EHD (found the instructions on this) and delete the media from the macbook internal drive to relieve space. Say, just in case my EHD crashes in the next 2 days after I do this, will I still be able to recover the previous media/project files from Time Capsule? Or do I need to copy the iTunes Media and iMovie project/events into the Time Capsule manually before I move it into EHD? Basically, I want to make sure I have 2 copies of my media, 1 in TC and 1 in EHD, since I am deleting it from mac’s IHD.
Now say I have the EHD connected to TC via USB and have moved my all media and movie projects into the EHD. So macbook is accessing the EDH wirelessly, as the source for iTunes and iMovie media. For performance or portability, if I plug my EHD directly into the macbook, can it seamlessly recognize it as the media source for iTunes and iMovie or are there any settings involved? I am just wondering since via the TC it was a shared drive, and now it’s a plugged-in EHD.
I know that Time Machine does incremental backups. Is there an explanation on this as to what is meant by hourly, daily and weekly backups and what are the copies made? I heard the hourly are replaced by daily backups and the daily are replaced by weekly, what does that mean?
This may not impact me now, but may be soon. Is it true that once TC is full, time machine will delete copies of the oldest backup? My concern is that I want to somehow conserve today’s backup for good. Is that do able?
Should I be concerned that time machine backs up every hour, since it may reduce my macbook’s performance during the backups? I know a way to reduce the backup frequency, am just trying to understand if it’s necessary to do so?
How do I use my time capsule as an external hard drive? The reason is I have another PC from which I want to copy files and store in TC as a backup.
I know I have many questions, but am hoping to get your expert advice. Thank you.Hello, seems like you wanted to do pretty much what i wanted to do. that is free up space on lap top. But still have instant access to your itunes stuff. I found a solution that works for me.
I have a portable WD hdd attached to my time capsule via usb, i then access both through the capsules wireless connection, using the TC for time machine.
The Apple tv then accesses my itunes lib through my MBP via TC's wireless. I did however connect the WD Hdd directly to my MBP for the initial transfer to the apple tv, but itunes seems to find the lib as long as its there, doesnt matter if its connected to MBPs usb or the TCs usb. Sometimes it might revert to the default location, but i've found that if you click on a song it still plays, then if you close then reopen itunes every thing goes back to your external hdd...
Which means if you go away or want your itunes lib on the move you just need a little WD hdd.
I'm not totally sure if its worked yet but i connected my WD hdd to my MBP vie usb and told the TC to back up that too by going to options in TM preferences, seems to have worked, not sure if it would work while connected to the TC usb connection, doesnt seem to.
NB:Before you do this do a back up of everything in you Itunes Lib on your TC incase you screw up.
(For easy transfer of your itunes lib go to preferences on itunes and create a folder called iTunes Music on your Hdd then close preferences and allow itunes to do its thing, then in itunes go to
file - library - consolidate library, itunes. Itunes then makes a copy of all music on your new hdd. I then deleted the tunes off my MBP)
Just make sure you open your finder and click on the TC to wake the drive before you open Itunes other wise you'll have to go in to preferences and keep altering the location for your itunes folder. which can take i tunes a while.
This method seems to cope with video and music just fine.
Well hope that wasn't too confusing, as i confuse myself at times.
Good Luck......... -
I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it
Move your content to a new Mac - Apple Support
-
Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting? -
I have a mid 2010 iMac with an upgraded i5 processor, however mirroring still doesn't work. What's the deal?
You did not look at Mountain Lion's Tech Spec's, click www.apple.com/osx and click the Tech Specs tab. That information has been posted for months.
-
I have a 2006 iMac that I've upgraded to each new os as they came out. I just wiped it (for the kids to use, I have a new iMac with Mavericks) and reintalled Tiger from the original discs. I want to get it back to Lion - which I purchased from the Mac App Store. But Tiger doesn't have the App Store and I don't have the discs anymore from the intermediate versions. I tried downloading Lion from the new iMac but it's not available...
Any ideas?To get to the App Store, you need to upgrade the Tiger machine to Snow Leopard.
-
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have 1 Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both of these devices use different Apple ID's than the Mac does? As in, can I set up 'find my "device"' for my husband's iPhone and my daughters iPad?
Welcome to the Apple Community.
No, but you can log into any of their accounts on your computer at iCloud.com and see their devices. -
If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?
You need a newer 2011 or later iMac to use Airplay.
Sorry.
For older Mac, look at an app called AirParrot
http://www.airsquirrels.com/airparrot/ -
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print
Maybe you are looking for
-
I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?
-
How to limit the search scope in single site collection for SP2013?
On our SP2013 farm, there is one web application and 4 site collections under it. At the beginning I was trying to setup 4 different "Content Sources" but Sharepoint warn me that I can only setup 1 source per web application. I don't want user search
-
How to enable multi-language support in JAVA
i want to make an application whose language will be URDU but how to enablw urdu or any non-english language characters in java.plz help.i am an SCJP.
-
I have a B&W G3 Powermac...It currently has a 20gb SCSI with about 11gb free...I mainly use this older G3 for just messin around on the net, but a buddy of mine gave me an old Seagate Cheetah 9.1gb SCSI, and i would like to install it as a 2nd HD, bu
-
Adobe Air I cannot open up a popup browser
I'm having a problem with adobe air. I cannot open up a popup browser window from clicking on a button in a adobe air program. I can only open up browser windows within existing browser windows or a new window if none is open.