I have a 2006 MacBook with 10.5.9 that won't update to 10.6

My MacBook has an Intel duo 2.0Ghz processor and 2 Gig of Ram. It has 10.5.9 and will not let me update to 10.6.8 from the disc. I know it may have an older build, but without being able to run 10.6.x I will not be able to use Chrome or a working Flash player. Anyone know a way around this or have more info or ideas? Thanks, Jay

The Snow Leopard 10.6 DVD should still be available at this time from Apple for $19.99. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already over $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
You can upgrade to 10.6 with no problems. Any program that runs under 10.5 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ 
You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/  
To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Similar Messages

  • I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?

    When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
    Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
    Here is the longer version I've been compiling:
    Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
    http://support.apple.com/kb/HT5446
    Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
    I have sourced some additional information here:
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
    http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
    If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report >  Serial ATA and the drives should show up as discrete drives with their info listed separately.

  • I have two apps on my app store that won't update. I don't need them. How can I remove them from there? Thank you!

    Hey
    I have two apps on my Mac App Store that won't update no matter what I do.
    One of them  is not even mine. It shows a weird russian email address that does not belong to me.
    The other one says "updated" but won't go away from the updates list no matter what I do (Reboots, etc).
    How can I erase them? I need niether apps.
    Thank you very much.
    Instalada = Installed & Actualizar = Update
    Jose
    <Email Image Edited By Host>

    Hey!
    There are two things here. The first one is that the apps aren't of course hacked/pirated. The mac is of a friend of mine. She's 65 or something and has no idea on how to hack apps, plus, afaik, nobody else has access to her computer.
    Secondly, the thing is that niether app shows at the app list, and we even made a find from a terminal window, and got no results of the apps.
    It is a very strange behavoir and if somebody has a solution I'll be glad to hear it.
    BTW, She just upgraded her machine to OS X 10.8.1, I'll check if the upgrad fixed the bug.
    Thanks!!
    Jose

  • I have a 2008 MacBook with OX10.9.5 and has 160 GB in Hard Drive. Can I expand this in order to Storage more photos and music..?

    I have a 2008 MacBook with OX10.9.5 and has 160 GB in Hard Drive. Can I expand this in order to Storage more photos and music..?

    Yes, any 2.5" dia SATA HDD will be compatible.  The largest are 2 TB at the present time>  Here is a selection from OWC:
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    There are other vendors as well.
    You will need a #00 Phillips and a #6 Torx drivers to install the HDD.
    Ciao.

  • I have a 500gb time capsule. with 100gb free. i have a 160gm macbook with 40gm free. if i get a new 500gm macbook can i keep using my 500gm time capsule?

    I have a 500gb time capsule. with 100gb free. i have a 160gb macbook with 40gb free. if i get a new 500gb macbook can i keep using my 500gb time capsule?

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
    Regards.

  • I have a 2006 iMac with an upgraded 640 gb hard drive. I seem to to be out of space, but if i add all the items, I get a different (100 gb!) answer than the Finder. Why?

    I have a 2006 iMac with an upgraded hard drive, 640 gb. recently i've noticed that the Finder keeps saying I only hve 12 gb available. it lists 18 items under macintosh HD and if (using Get Info) you add up those 18 items I only come up with just over 500 gb of space. Where the other 140 gb's??

    Here are some links as there are too many answers for this general question:
    Where  did  my  Disk  Space  go?
    http://macmost.com/what-to-do-when-your-hard-drive-is-full.html
    OmniDiskSweeper is a good program to see what's taking up space: http://www.omnigroup.com/products/omnidisksweeper/

  • I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.  Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?  I have run the program to check a problem

    I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.
    Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?
    I have run the program to check a problem that I'm having. The particularly with video, and also volume structure. TEchTool Delux reports a failure for both of these components.
    I am wondering if this is realistic or not, given the start-up screen for TechTool Delux mentions on start-up that it has yet to be tested fully with Lion?
    With thanks, Ron.

    Yes, I understand, however, he Macbook is out of its Applecare, but the TechTool it still on the machine. Does that entitle me to an upgrade in TechTool?
    I suspect not, hoever, seeing I am running Lion, I am not sure at all? If you can answer this question it will help as then Imight be able to solve the problem I'm having.
    Best regards, Ron

  • I have an original MacBook Pro 17" It appears that the red is out of convergence. It is not the graphic card because it works fine with separate Monitor

    I have an original MacBook Pro 17" It appears that the red is out of convergence. It is not the graphic card because it works fine with separate Monitor

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • I have 2 2006 macbooks that have chips. Will apple replace them for free?

    Hello, i have 2 2006 macbooks that have palmrest chips. One is black and the other is white. the lack one also has a chip in the top left corner of the screen. I have heard of people getting the replaced for free bacause of faulty construction and wear and tear. Will apple replace the palmrest fro free? What about the chip on the top left of the screen? The optical drives dont work on either too. How can you fix that? Thanks!

    The only one who can answer this question is the Apple Genus after the MacBook has been inspected.
    Allan

  • HT2801 I have a 2009 MacBook with an optical drive built in. It has "spotty" performance lately, so I got a USB super drive for Christmas. Unfortunately, the MacBook doesn't "see" it. Any solutions?

    I have a 2009 MacBook with an optical drive. It is becoming unreliable, and as a result, I got a USB SuperDrive for Christmas. Problem, neither my MacBook, nor my iMac (2008) recognize the drive.  What's the issue? I thought I could get a few more years out of my MacBook by using an external USB optical drive.

    The USB SuperDrive is only designed to work with a few Mac computers.....specificaly the ones that do not have an internal Optical Drive...
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

  • I have a 2007 macbook with a cracked unviewable screen and want to transfer files to a new imac.  Is there a way to do this?

    I have a 2007 Macbook with a cracked (unviewable) screen.  I want to transfer all files from the Macbook to an Imac but have no way of seeing whats on the Macbook.  How can this be done??

    Yes. Put the old MacBook into Target Disk Mode then connect it to your iMac using a FireWire cable. Note that if your iMac is a new one, you may need to use a FW400 (which is what the MacBook has) to FW800 adapter.
    Once the two computers are connected, use the Migration Assistant to do the actual transfer.
    Best of luck.

  • HT1386 Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post.  I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

Maybe you are looking for

  • Problem while starting the weblogic managed server

    Hi, I am facing the following error while starting the managed weblogic server : weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error whil

  • Dimension Number of BSO Application on Essbase

    Hi, I'm new in Essbase and I should review an existent BSO application to improve its performance. This application has an outline with 5 dimensions, Measure (Account), Period (Time), KPI, Recalculated Market and Organizational Structure. These dimen

  • PDF Toolbar in IE7 Grayed Out. Why?

    We are using Acrobat Standard 8 and IE7.  We are experiencing an issue with the PDF toolbar in IE7.  Sometimes the toolbar is grayed out and at other times it is not.  This seems to happen randomly. During a recent training class, all participants vi

  • Sending .arb files to function generator

    Hi  i am  very  fresh to labview  programming.  I have  created some  waveforms  using  HP BenchLink software(and saved in .arb file  format).  Can i send  these  wave forms  to  a  function generater  through Labview  program . if  possible   how  c

  • Metachain in Process chain is failed

    Hi friends, yesterday process chain was failed because of some errors. after correcting i did manual load to all as in the meta chain . Today process chain was failed because of the same meta chain not even running. there is no process monitor option