I have a 2007 macbookpro w lion 10.7.4. Does swipe not work with this?
i have a 2007 macbookpro w lion 10.7.4. Does swipe not work with this?
What are you talking about? This is the iPhone forum.
Similar Messages
-
I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you helpWhy don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link. -
OS X Lion, will Quicken 2007 work? What other software does not work with this upgrade?
Considering upgrading to OS X Lion. DOes anyone know if it will work with Quicken2007? Or other software which it may not work? Thanks!
Quicken 07 - No
Quicken Essentials - Yes, but the milage varies
Have a look at > App Compatibility Table - RoaringApps -
Iphoto was working fine until I downloaded and installed LION. Now I get a problem message to check that iphoto is compatible with this version of MAC OS X.
I always download software updates.Have put iphoto into trash and tried to re-install it from cd, but although it is there on the list when I try to install, it is not in bold and does not permit me to tick it.
I have been to the app store and it tells me that iphoto is on my computer. -
How does syncing Notes work with Mountain Lion ?
How does syncing Notes with Mountain Lion?
Notes are synched via IMAP. IMAP is a protocol most frequently used by email.
So if you have an iCloud account and have set up a @me.com email address, that's what is used to sync. For Gmail, that can be used as well, though Gmail's IMAP support has to be enabled on their site and their implementation is very nonstandard and can be problematic. Best is to sync notes via iCloud. -
How do I get a virtual lab to work on this computer. The technician said the CD is not compatible. Maybe corrupt. He seemed he did not know
what he was talking about. I asked him was it any software I could download he said no. This CD works fine on my other computer, no it is not an apple computer. And I use quicktime on both computers. But on this apple computer quicktime does not play this CD, which this type
of CD works better with quicktime. Any suggestions on how to solve this problem. This is a new computer, I would hate to think their is nothing that can be done.I need step by step instructions on how to get my virtual lab cd to work. The technician said cd not compatible or is corrupt. I do not believe their is nothing that can be done. When I put the cd in the side slot nothing comes up on the screen. I have tried several ways, the technician did not seem very knowledgeable on what to do. Also this cd plays fine on my other computer which is not an apple computer. Is there anything I can do to correct this?
-
When I try to pinch in and out on the trackpad it's not working, but then it will work on my desktop when I minimize firefox.
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
just bought an iPad 2 and i have a Macbook Pro OS X version 10.4.11. can i not set up my iPad 2 because of this and i have to get the 10.5 version???
You need to purchase and install 10.5 or 10.6.
(58630) -
Why does iMessage not work with people who I have previously iMessaged?
For the past couple of days, I have been having issues with iMessage switching back and from from regular texting. I went to Settings>Messages and turned off the "send as an SMS" option. Which kind of solved the problem, but sometimes it's taking forever for it to say "delivered" underneath when it has sent.
But the MAIN problem I am having is that with 2 of my contacts--who both have iOS5 and with both I have previously iMessaged--it doesn't say "iMessage" in the text box with a blue send button. It says "text message" with a green send button.
Is there any way to fix this?
Thank you for your help!You can only send a imessage if you are connected to the internet if there is low signal it will send the message normally
It takes a while to say delivered because to recieve imessage the other person has to be connected to the internet so if they have a low connection it wont say delivered till they have a good connection -
the Print Mode has a line through it and says it has not been updated.
How do I even install new printer software,I went throught the install process but for what ever reason it is still not working.
Aloha
DavidPlease look at Reset Printing System feature
-
I contacted to tech support of the software and "they are working on it".
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer) -
I have a 2007 Macbookpro and it started up with gray checkered boxes and across the screen I tried to re load OSX and it work 1 day and started again is this a hard drive problem or Video? Now as it starts to load a screen comes up saying to restart over and over again
I'd suspect this known issue:
http://support.apple.com/kb/TS2377
if you have a late 2007 MBP.
The only testing you can do at home is to attach an external monitor and see if the defects repeat on the external. If so, get to an Apple store. If the computer's video chipset fails a test the Apple Store will perform, you get a free logic board replacement. Turnaround is usually one day to one week--not bad at all.
If the defects do NOT repeat on an external monitor, then the problem is not covered by the above Repair Extension Program
The issue is heat-triggered. Be certain that you control heat once you get it fixed. Don't use the computer in your lap without a lapboard; don't block the vents under the display hinge; don't us in clamshell mode, etc.
Maybe you are looking for
-
iTunes will not open, I keep getting the error 7 (windows error 193). I have tried many recommendations, erasing folders, reinstalling it many time but nothing. I have a windows 7 Lenovo ideapad.
-
Toplink\JPA vs JDBC - Toplink died for my app with 5000 users
Hi All Just a quick question about performance when comparing toplink jpa ans jdbc. I have an app I just develpoed using toplink for all data acces that will have approx 5000 users and initial testing with 200 things look good. However after launch a
-
I am running windows 7 Pro. Not a beta copy. It seems like I have relly lost a lot in the Download speed. I am on a wireless connection with a belkin usb n Wireless. I am connecting at 100 to 140 Mbps. Does that seem really slow? I have Time Warner C
-
AE : create request : Error in request. Invalid 'Valid From/Valid To
Dear Forum, Has anybody encountered this error ? A date format issue ? If so, where to solve ? We have reset the dateformat to yyyy-mm-dd within Windows SQL Server. Still doesn't work. Thanks for investigating Sam Szafranski
-
Migrating from FirstClass to Exchange
This message is for the very few out there who will be migrating from FirstClass server to Exchange. I created a VB Script that will convert exported messages from FirstClass into a comma delimited file (CSV) that can be imported into Exchange. First