I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update?
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
Similar Messages
-
Is this a design flaw? Since the 1st Generation has a hard drive (140GB). If both are on, only the 1st Gen get recognized. I would think you could use both at the same time..... Help!
Welcome to the Apple Community.
Yes iTunes should work with them all together. Do they have different names, are they on the same network, have you noticed any other problems. -
the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem
Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2 -
problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.
The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards. -
MY computer beeps when I try to turn it on and it won't turn on. Has anyone else had this problem?
Remove and reinsert the computer's RAM.
(72430) -
I've tried to charge it and i've tried to reset it but it won't even connect to iTunes. Please help!
Don't know why it happened, but if you can't enter the passcode, you'll have to restore the phone to remove it, as explained here: http://support.apple.com/kb/HT1212. If you're running iOS 7 with Find My iPhone enabled, you'll have to force it into recover mode to restore it, as explained here: http://support.apple.com/kb/ht1808.
-
I have tried a reset...no luck. Help!
Text messages are a carrier issue. Contact your wireless carrier.
Or, restore from a backup,or restore as a new device then test the issue. -
Trial version of Elements 13 won't recognise my printer. Anyone else had this problem?
I'm running a trial version of Elements 13 and cannot print either a PSD file or JPG file. I get an error message that it does not recognise the default printer. I'm able to print emails and Word documents, so it is undoubtedly an Elements issue.
Hello,
Sorry for the inconvenience caused. This issue has been fixed in Elements 13.1. Please try updating your application to free 13.1 update.
You may refer to this article for the same: Photoshop Elements Help | Printer errors with Photoshop Elements 13
Let me know if you are still facing this issue.
Regards,
vaishali -
I have an Iphone 5 and only a certain part of my lock button works (The back left portion) is anyone else having this problem?
im having the same problem. but its not justyou and me, its all over!!!!! My friends lock button got stuck 2 weeks after she got her iphone 5, but since its a manufacturing problem, if you go to your carrier store (verizon,ATNT,Sprint etc) and tell them whats happening, theyy have to give you another one
-
My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.
I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.
-
The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.Somewhere in there, is there a question for us, your fellow users in these user to user support forums?
-
My lightning cable is falling apart. Is anyone else having this problem?
christopherfromjamestown wrote:
The rubber coating is tearing away and falling off leaving the braided shielding exposed.
I have not experienced that problem but it's a warranty issue. Contact Apple - 800-275-2273 in the U.S.A. and I think Canada. -
I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program?
I'd start with the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Maybe you are looking for
-
BPM CBS - Exception during process compilation
Hi Experts, I am developing a BPM process using SAP NWDS 7.2 and a remote NWDI track. I have the following issue: When I edit my process, I create an activity for submit this changes. Later I try to check-in the activity and everything is okay, but w
-
RFC_ERROR_SYSTEM_FAILURE -Exception condition 'INCONSISTENCY' rasied .
Hi I created a report with 'Calculated KeyFigure' and 'Restricted KeyFigure' . And i transported to BI-Quality System. Then i opened the query in BI-Quality Query Designer and try to see the 'Calculated KeyFigure' and 'Restricted KeyFigure' . And im
-
Problem while loading metadata in IDX2
Hi I tried to load metadata in IDX2 .I passed the parameters IDOC TYPE and SOURCE PORT .when i asked to continue it is showing me the that " <b>No RFC destination is maintained for the port</b> ". When I checked that particular port in IDX1 I am able
-
HT2477 Installing Adobe Flash Player
I'm having trouble installing Adobe Flash player for my new MacBook Air. All seems fine, but then it is not recognized when I go back to use it and I'm told to download and install it again. Is there another version I should use or something to do di
-
Reconciling Photo Problem when syncing
When I sync my IPhone 3GS an error occurs only when syncing the photos (reconciling the photos), and the error message is : the iphone can not be synced. the required file cannot be found. And all the folders on my iphone that contains photos contain