I have a 2009 17" macbook pro .... how do I connect two 24" Viewsonic VX2450wm-LED monitors.

I purchased two 24" Viewsonic VX2450wm-LED monitors to connect to my 2009 17" macbook pro.
The monitor inputs is DVI.  Since the plugs do not match up...an oversite on my part when buying the monitors online, I am hoping to run these 2 monitors from mini displayport to DVI.  However, 2 external monitors requires a hub like the DualHead2Go DP Edition
However!  This device has many poor reviews on Amazon and I am concerned about spending the money and wasting the time on a device when there may be a better option.
At this point I dont plan on using the macbook screen while using the twin 24" screens.
The answer to this problem is not an easy one to solve and the answeres to my questions I am finding are bringing up new concerns...for example, learning that the Matrox above mentions that Hz compatability which i had never previously though of, may have been a problem to consider...depending on the monitor...however, i think im good here.
Can someone baby step me through the process and exactly what components I need to get these 2 External monitors working properly via my macbook pro?
Note: Please do not be an arrogant computer d!k.  I have already had 1 person act like a smart @ss when all I need is a real answer...not someone else Googling a 10 second easy answer and responding with sarcasm...I am quite familiar with a Boolean search...thanks but I am looking for someone with EXPERIENCE...not a search engine
*Would it be easier or cheaper for me to return these moitors and get different monitors with different plugs?
I appreciation all the input and assistance anyone can provide...I'm pretty new to the mac world.
BTW.
The system will be used for the Adobe CS5 Suite (mostly Illustrator and Photoshop), Pro Tools 10, Serato SL3, Video Editing (mostly iMovie) and browsing.
MacBook Pro, Mac OS X (10.5.8), 2.66 GHz COre 2 Duo 8 GB RAM

Hey drexfarrakhan,
Thanks for the question. For video, you can use a Mini DisplayPort to HDMI cable or adapter. Our online store has a few offerings:
Mini DisplayPort to HDMI - Apple Store (U.S.)
http://store.apple.com/us/search/Mini-DisplayPort-to-HDMI#!
However, your MacBook only supports video out via this connection:
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
So you’ll need an external stereo or speakers to output the sound to, using the headphone out port and a 3.5mm cable (or adapter, if needed):
MacBook Pro (17 inch, Early 2009): External ports and connectors
http://support.apple.com/kb/HT3407
Thanks,
Matt M.

Similar Messages

  • I have a 2009 13"MacBook pro running on OS X 10.6.8.  How do I know whether this is leopard or mountain? What would you advise that I use as I need to be running OS X 10.7?  All help appreciated.  Thank you.

    I have a 2009 13"MacBook pro running on OS X 10.6.8. 
    How do I know whether this is leopard or mountain?
    What would you advise that I use as I need to be running OS X 10.7? 
    Also can you advise how I upgrade please?
    All help appreciated.  Thank you.

    Thank you for your response Niel.
    I do run Microsoft Office 2011 - will Snow Leopard support this?
    Finally why snow leopard and not mountain lion?

  • HT204053 I do not have ICoud in my MacBook Pro, how to install it

    I do not have ICoud in my MacBook Pro, how to install it

    It looks like you operating system may not meet the minimum requirement.   
    Cheers
    http://support.apple.com/kb/HT4759

  • I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?

    For clarity:  I have a mid 2010, Macbook Pro.  I recently decided to upgrade to a Crucial SSD drive, double the ram (8 gigs), and remove the optical drive in favor of using my old drive as a back up.  I am also currently running Yosemite.
    I want to install Windows 7 onto my SSD, using bootcamp.  Unfortunately I no longer have an optical drive installed, which makes things difficult as Bootcamp does not even give me the option to create a bootable USB.
    Now, this is where things get kinda fuzzy:
    MId 2010 macbooks use EFI, and are quite capable of booting from USB.  How do I know?  Because I booted from a USB drive in order to do a fresh install of Yosemite on my SSD.
    I have read mutliple forums and threads with claims that folks have had no problems doing this on 2008 Macbook Pros running Snow Leopard.  However, what seemed to be required was some clever .plist modding.  I have used both text wrangler, and x-code to do this, unfortunately upon booting of bootcamp, bootcamp instantly crashes.  Naturally, I can restore bootcamp because I made backups of the .plist file.
    It would seem that modffying the .plist file assumes that the option to create a bootable USB device is grayed out.  In my case, it is non existent.
    I have also read that folks have had success using rEFIt, however rEFIt has been forked to rEFIned, and the developer of rEFIned made mention on his site that Yosemite handles booting differently than previous versions of OSX.
    WIth that, I was hoping that some kind person could explain to me whats going on, what I am missing, and what I can do to make this happen just shy of tearing down my MBP and reisntalling the Optical Drive and dusting off my Win 7 disc.
    Also, my Model Number/Bootrom is MBP 6,2.
    Thanks in advance!

    Thank you for your reply, and the information.  This is what I came up with:
    I added the strings as instructed, however when I went to sign the script in terminal, I was told:
    /Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
    /Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
    In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
    Also, here are screen captures of the lines that I added.  Mine are the top string entries:
    Thank you for your help, thus far!

  • How do you connect picopix to MacBook Pro, How do you connect picopix to MacBook Pro

    How do you connect a MacBook Pro to a picopix projector??

    Does your new MacBook Pro have the retina display? if so you can get a HDMI to VGA adapter here- http://store.apple.com/us/product/HB416ZM/A/belkin-hdmi-to-vga-projector-adapter ?fnode=51
    It's a bit pricey but should do the trick.

  • Brand-New MacBook Pro: How do I connect 2 internet?

    I have a MacBook Pro that came with AirPort Extreme. I don't know how to connect it to the internet.

    In order to connect to the Internet with you new MacBook Pro, you will need access to either a wired or wireless Internet service provided by a local Internet Service Provider (ISP). Do you currently run DSL or Cable for Internet access now?

  • Hi - How do I connect an HDTV as a second monitor to Thunderbolt display with macbook pro in clamshell mode?

    I have a Late 2011 Macbook Pro in clamshell mode connected to a Thunderbolt Display with the built in Thunderbolt cable. I want to then connect an HDTV via the Thunderbolt port at the back of the Thunderbolt display. I already had a  cable that I thought would work which turns out to be a MiniDisplay port to HDMI cable and therefore not compatible with Thunderbolt to Thunderbolt (Mini DisplayPort not being the same technology although it uses the same port - although I'm not an expert !!) So far a web search has provided me with the only solution being using a Thunderbolt dock or storage that has multiple Thunderbolt ports and then  using that to daisychain inbetween the Thunderbolt Diplay and the HDTV. The cheapest solution I can find for this would be about £250. Surely not ??!!!!
    Many thanks for any comments - Nik

    You could also use aThunderbolt dock with HDMI, such as:
    <http://www.belkin.com/uk/F4U055-Belkin/p/P-F4U055/>
    <http://www.caldigit.com/thunderboltstation/>
    <http://www.elgato.com/en/thunderbolt/thunderbolt-dock>

  • MacBook Pro can't actually connect to Wi-Fi with Self-Assigned IP

    Hi there
    I have a 15 inch MacBook Pro and it can connect to Wi-Fi but have no actual data coming in. And it says self-assigned IP.
    This only happens to my home Wi-Fi, however, I can connect and use Wi-fi at school or anywhere else perfectly. In the mean time, my Android phone and my flatmates' Windows have no problem using the Wi-Fi. The problem has been going on and off for a month, sometimes it works again and sometimes it goes wrong like this again.
    During this time I mostly use my other MacBook Pro 13 inch Retina. Until today, this problem happens on my 13 Retina mac for the first time, and the 15 Pro again as well. A few days ago, my 15 Pro started working again, and today they just gone wrong together at the same time.
    I just found out that my 15 pro can still work if connected to ethernet, but I can't just work in the living room, where the router is. And as you know Retina doesn't support Ethernet.
    I've check on the Internet and found many people have the same problem as I do. I also tried lots of ways to fix it with the information I found online. And nothing works. I even suspect that it's actually my flatmate blocks me out with some setting on the router (Is it possible?)
    Anyways, can someone please help me fix it thoroughly... Please and thanks.

    Each country regulates wireless networking differently. Wi-Fi devices are restricted to certain frequencies and power levels. The client devices try to find out where they are and configure themselves accordingly. Since a wireless access point (WAP) usually does not move across national boundaries, the Wi-Fi regulatory domain (country code) is set by querying the first one to respond when the client initializes itself. You don't have any direct control over it on the client. If your device is picking up the wrong country code, and is therefore locked out of using some Wi-Fi channels or operating at full power, the only lasting solution is to fix or remove the misconfigured WAP.
    To find out which WAP's are broadcasting a wrong country code, do as follows.
    Triple-click anywhere in the line below on this page to select it:
    /S*/*/P*/*/*/*/*/airport -s | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    A TextEdit window will open with the output of the command. The first line should look like this:
    SSID BSSID RSSI CHANNEL HT CC SECURITY (auth/unicast/group)
    Each line below that one represents a WAP within range. Compare the two-letter code in the column headed "CC" with the ISO code for your country. The code "X0" means that the country couldn't be determined. If a WAP with a wrong code is not under your control, try restarting the computer as close as possible to your own router.

  • Macbook pro won't boot with two new 4GB RAM sticks.

    I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

    rdsvs wrote:
    all specs are the same. old and new has code as below
    pc2-5300 ddr2 667 200pin
    Unless I misread your reply, that is not quite accurate.
    Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
    Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
    Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • I have FaceTime on my macbook pro but want to add it to my Mac pro.  Since I've already purchased the app, it won't allow me to purchase it again.  Can I use the app for both computers?  How can I access FaceTime for this computer v. 10.6.8?

    I have FaceTime on my Macbook Pro but want to add it to my Mac Pro v. 10.6.8.  Since I've previously purchased it in the app store, it won't allow me to purchase it again.  Can I use the same app for both of my computers?  If so, how do I access the app to download it?

    If you upgrade to Lion it comes bundeled with it!
    To get it on your Mac Pro just copy the aplication from the aplication folder on your MacBook.  You can do this via a thumb drive or over a local network connection.

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

  • I have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

    i have an iphone and i took notes on it today and i want it to appear on my macbook pro. how do i do this. i think the phone is under a yahoo account and my computer is under something else. how do i log out of the yahoo acct and into the other.

    Create a new user account on the computer that he can log in to.

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

  • I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard.  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems.  Is it possible to go back in time with Time Machine and reinstall Snow Leopard?  Then upgrade to Lion or Mavericks?  Any other ideas on how I can exit Yosemite?

    Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
    1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
    2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
    You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
    After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
    3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

Maybe you are looking for