I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more. Help!

I have a 2009 MB Pro. I have been trying to do some cleaning of files and discovered that in Finder, All Images, I am experiencing a frustrating problem. I spent a few hours trashing over 4K images and within a few hours, I had as many more.  I did a couple of thousand trashed images and half hour later, more arrived. There are a lot of images that seem off the internet, including gif.s, png.s. Help!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Similar Messages

  • I have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows

    i have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows. i trying to install windows using bootcamp but does not allows me to download the drivers..

    From the system requirements page: http://support.apple.com/kb/HT5634 for your computer
    MacBook Pro
    (13-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, 2.53 GHz, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Early 2009)
    4
    4
    DVD
    DVD
    DVD
    The drivers are located on the OS DVD that came with your computer.

  • I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

    I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise?  During installation emptied cache, etc. Backed up using time machine, fortunately.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I have a 2009 Mac Pro 10.8.3 and half of the time Disc Utility doesn't respond?  Any ideas?

    I have a 2009 Mac Pro 10.8.3 and half of the time Disk Utility doesn't respond and I have to force quit and restart the machine.  Any ideas?

    You have some (major) issues.
    Are you in Recovery Mode ? Used Option key or Command R to get there?
    I would grab the ML installer ESD you saved and do a clean install on another drive and begin to rebuild to a new system.
    You may or may not have TimeMachine but have backed up problem files.
    Having a bootable backup clone of your system is a must.
    Hard shutdowns will add more layers of problems and add to whatever there was before.
    Generally there is not a need to use Disk Utility other than to repair permissions either before or after installing updates.
    Have you:
    tried with everything else unplugged so you don't have any external devices
    tried with a safe boot
    Why.
    After any forced shutdown you should use ML Recovery and one Safe Boot on the first next boot from a working system.

  • I have a 2009 macbook pro and my email account is doubling every message I get.  I've had it for about 3 weeks and this just started.  Any help?

    I have a 2009 macbook pro and my email account is doubling every message I get.  I've had it for about 3 weeks and this just started.  Any help?  Every time I get one email, I get 2 copies of the same message.

    This discussion may prove useful:
    http://forums.macrumors.com/showthread.php?t=88279

  • I have a 2009 MacBook Pro. Does anyone else have issues with their laptop having problems starting when shut off or restarting when asleep since installing Yosemite?

    I have a 2009 MacBook Pro which I have upgraded a few things on. I have updated to Yosemite and am having problems with getting my laptop to come out of sleep mode, and to start when shut off. Any ideas of what this might be or how to correct it? Is this more probably a hardware issue or software?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Download and install the 10.10.1 update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

    My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

    2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
    I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

  • HT1338 I have a 2009 MacBook Pro running OS X 10.5.8. How do I upgrade to 10.6 or later??

    I have a 2009 MacBook Pro running OS X 10.5.8.
    How do I upgrade to 10.6 or later??

    Click here and buy it on DVD.
    (75849)

  • I have purchased Acrobat X1 Pro, I have downloaded and have received an order no. but no email giving a serial no. also can't find My Adobe to access the serial no

    I have purchased Acrobat X1 Pro, I have downloaded and have received an order number by email but no email giving a serial no. Also can sign in and find account details but can't find My Adobe to access the serial no

    Like most online purchases you would normally receive the order number before the order is processed so you should be patient and allow some time for the processing to happen.  If you feel you have waited long enough then you should contact Adobe Support directly and try to get information on your order since you now have a reference for it that you can share with them.
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Get chat help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Have an older Macbook Pro 10.6.8 tried to update it to XMavericks. Discovered that my microsoft apps are not compatible. Can I keep my files and convert them?

    Have an older Macbook Pro 10.6.8 tried to update it to XMavericks. Discovered that my microsoft apps are not compatible. Can I keep my files and convert them?

    Use a product such as LibreOffice, the iWork applications, or Microsoft Office 2008 or newer to open them.
    (107914)

  • Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems.

    I Have an HP Officejet Pro 8500 Wireless. Trying to print to it from my iPad2. Having some problems. Trying to print docs or files from the iPad usuall gets me a page that looks scrunched up to one side. Is there a good printer app (preferably free or shareware) that I could get or is there a patch, new driver, new firmware or something for the 8500 that would allow good printing fro the iPad wirelessly?

    The latest firmware version for your printer is DLM1FN1006BR; you can verify yours by printing out a self test page via the front panel of your printer. 
    Also, the HP ePrint Home & Biz app supports printing over your local wireless network, so please verify if your printer is connected to the same access point as your iPad2.  You are also able to verify connectivity by typing your printer's ip address within the address bar of your safari web browser.
    Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
    I am an HP employee.

  • I have just purchased Premier Pro - I have been waiting to down load it but it says it is still processing my order? how long does this take?

    I have just purchased Premier Pro - I have been waiting to down load it but it says it is still processing my order? how long does this take?

    Hi There,
    We have checked the details for your account, your subscription is activated.
    Kindly download the product using the below mentioned link.
    Creative Cloud Help | Install, update, or uninstall apps
        2. If you face any trouble kindly check.
    Troubleshoot Creative Cloud download and install issues
    Error downloading and installing Creative Cloud application
    Thanks,
    Atul Saini

  • Went with Verizon because the rep and Verizon's coverage map showed strong 4G LTE signal at my address. Got home and discovered that the signal is nowhere near what I was shown. People have said that they contacted Verizon and received signal boosters and

    Went with Verizon because the rep and Verizon's coverage map showed strong 4G LTE signal at my address. Got home and discovered that the signal is nowhere near what I was shown. People have said that they contacted Verizon and received signal boosters and I was wondering if anyone had knowledge of this?

        jslack73,
    Thank you so much for those details. I do see that the area should have pretty good coverage. Since you have been at home have you been able to remove the sim card for a good 10-15 seconds http://vz.to/1ys6Uj0? Also, please try resetting the network settings on the phone. You can do that by going into Settings, General, Reset, and Reset Network Settings. After this is complete you would need to re-add in your wi-fi passwords. Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • My last computer had outlook on it and I have been trying to access some of my old email. Is there an outlook program I can use on my mac?

    My last computer had outlook on it and I have been trying to access some of my old email. Is there an outlook program I can use on my mac?

    You would need to purchase MS Outlook for Mac - here's a link.
    Unfortunately this means you would need to buy the whole MS Office package.

  • I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

    I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

    The formats YouTube supports can be found here:
    http://www.google.com/support/youtube/bin/answer.py?answer=55744
    Since YouTube supports AAC, the file format iTunes uses by default, it's probable you don't need any sort of converter.
    If you continue to have problems with uploading to YouTube, I'd suggest you ask for assistance in their forums:
    http://www.google.com/support/forum/p/youtube?hl=en
    Regards.

Maybe you are looking for