I have a 2010 macbook pro 2010 13.3" laptop that will not update from 10.6.3
I have an Apple macBook pro that will not update at all. It is a 13.3 model the initial load is 10.6.3. The battery is dead as well and the pram seems to not hold as well, time reset even when plugged in on restart. any update leads to the spinning wheel freezing, and i mean freeze even the dvd drive stops working completely. Any ideas?
You can update to higher versions of Snow Leopard by applying the combo updates, anyway. Your predicament may come from the fact that a prior update didn't install properly, and is blocking the install of other updates. You should download the combo updates from Apple's website, and apply them.
You'll find the 10.6.8 update here. You'll still have to apply the various security updates that have been released since, if any.
Similar Messages
-
Has this happened to anyone else?
Jaybunni wrote:
I have had my macbook pro for 3 days, and it will not charge.
You have 14 days from the date of purchase to return your MBP. Personally, I would not waste my time "troubleshooting" if the normal solutions do not work.
Return the MBP for one that works before your 14 days are up and/or call AppleCare ASAP!!!
Good luck! -
As already stated, I have recently purchased a MacBook Pro with Retina display. It will arrive in 4-5 weeks so I don't assume it will arrive in less than 30 days. I would like to know wheather I will still be entitled to a free softwere update to the Mountain Lion. The laptop will ofcourse be completely new and recently purchased, so it would be very disappointing if I am not entitled to this update. Please let me know if you know anything about this or have any assuptions. Thank you
You can call apple if you need reassurance, but they will not turn you down on the free upgrade just because you have not received your computer by day 30.
-
I folks please help we have a grey screen issue here it will not allow me to re install the OS it does not appear to allow itself to get back on line to verify itself it's little legs are up in the air, just begging for the crusher!
What model MBP do you have? What OS are you trying to install? And, from where?
-
I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over
Polly,
usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste. -
MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?
Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan -
My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?
The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation. -
Every time my MacBook Pro is put to sleep, it will not connect to the internet upon reopening unless I perform diagnostic assistant.
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. Reinstall OS X. -
I have purchased Black Jack Pro - G 3 Studios. It will not work. It come up but immediately flips off. I called apple Support and they said delete it and re-down load. I have tried that many times. When I go to App store and try to re-download - it comes up "Downloaded" - as in you alreadly have purchased it. Always before on other Apps, I just delete and repurchase and when it comes up OK. But this one comes up "Downloaded", so it will not let me repurchase it.
It still does not work- How do I get it to work?Hi Ken,
Wow, I've logged into adobe and never seen your response until now.
I need to make the forums more of a daily stop I guess.
Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared
Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
I have of course rebooted,
Gone into taskmanager, killed all the relevant threads, tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
Is there a way we can use it more of a "ftp" sort of thing, when I want to I can put files there? There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting. Just an fyi. for what it's worth.
Please, feel free to contact me,
I'm on g+ chat [email protected] -
just purchased call of duty 4 on my macbook pro 10.6.8 4GB but will not launch or open. Any suggestions, please.
Installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you. Restart your Mac after the combo is installed. It's ok to do this even though you are already running v10.6.8. Then try launching the app.
if that doesn't help, try contacting the developer of the app > http://support.aspyr.com/home -
After upgrading my MacBook Pro, my 3rd generation i-pad will not charge. The device says, "this accessory (the charger) may not be supported. My i-phone 5 charged just fine. Thanks.
iPad: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Also, this is the MacPro desktop forum. I requested your post be moved to the MacBook Pro forum -
can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.
What browser?
Is this a Mac Pro? -
I have an Ipad 2 and have about 20 apps that will not update, How can I delete these?
I have some apps that will not update on my IPad 2. They say they are installing, but Installing is grey..not black, and they have been like this for several weeks. I cannot find out how to finish the updates or delete them. Can someone suggest a solution? Thanks, Ann
You can only delete them one at a time on the iPad. If you have an IMAP email account, go to your email in on the server using a web browser and select as many as you can at a time and delete them that way. That action will be reflected on the iPad. In IMAP - whatever you do on one device syncs across all devices. If you have POP email - start deleting one at a time.
-
I am trying to activate LR6 on a laptop that will not be connected to the internet. I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet". I never get there. How do I get it to generate the code that I can take to an internet enabled device so I can validate it?
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
-
I have pending app updates that will not update, any suggestions great fully received
I have pending app updates that will not update, any suggestions great fully received
Try This...
Close All Open Apps... Sign Out of the Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Maybe you are looking for
-
Dear Friends, In our company we are using item category HAWA (Trading Goods) but when i am going to IMG > Sales and Distribution > Sales > Sales Documents > Sales Document item > Define Item Category. Kindly suggest wht to do? whether its under hide
-
Missing Attachments From ONE Sender
We have one user who can't seem to get PDF or Excel attachments from one sender. I sent him test emails with pdf and excel attachments and he got them just fine. We are running BES 4.1.7.17. I'm drawing blanks on this one. Oh, and the email in his o
-
Multi language support for BI graphs
Hi All, We are using Bi Beans 10.1.2 and AWM 102030. In a particulars field, we have values in many languages say English, Japanese, Korean etc. We are getting the output of database correctly in these languages. But once we create the BI graphs, it
-
OSX Snow Leopard install problems
I need to install Snow Leopard over 10.5.8, but can't get the install to complete. If I do a straight install, it'll progress for about 15 mintues, then notify me that the install will complete on restart. If I resart, the disc will eject in the st
-
I signed for a year last week, the payment was confirmed, but my accout was not updated. How should i proceed?