I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that Apple sends? I already checked my files but i don't find anything that would cause that much of a big jump.

Hey hippie, this should help you figure out where your disk space is going http://pondini.org/OSX/DiskSpace.html

Similar Messages

I have a 2011 Macbook Pro 15" Snow Leopard Quadcore icore 7 with 8Gb of RAM and Im a Webpage Graphic Designer but why is my Macbookpro is so slow!?

I have a 2011 Macbook Pro 15" Snow Leopard Quadcore icore 7 with 8Gb of RAM and Im a Webpage Graphic Designer but why is my Macbookpro is so slow!?
I'm opening like Skype, AIM, Chrome the Memory Hog, Adobe Photshop and Illustrator... Its so slow! I tried Onyx, CleanMyMac, iFreeMemory or just purging but still i still have to restart to get it back to normal after closing all the applications... im not really impressed with the memory swapping thing,Even though my inactive RAM is like 2GB its so SloW! Anyone knows how to fix this problem?

It's hard to say why your machine is slow, but that machine with 8 GB of RAM should not be slow. Could be any number of possible problems. Try taking a look at the Mac OS X Speed FAQ.

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this?

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this? and no, there is nothing wrong with the cards, they shoot fine, my dell inspiron 15 reads these cards fine, but yet my brand new macbook pro does not.

After many days of frustration, I try a stupid thing.... Put the SD card in the Lock Position and... Voilá!
The way I find to access the content is put the SD card in the Lock position..
Cheers

I have a 2010 Macbook Pro and am a very new user to Mac community. My Mac is just hanging and I am unable to shut it down or do anything at all. I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago.
My Mac is just hanging and I am unable to shut it down or do anything at all. I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

In order to resolve the issue if it occurs again, more info would be helpful as to what occurred prior to the "hang." One potential fix would be to try a Safe Boot:
After the Mac is completely shut down, push the power button and immediately after the startup tone, hold down the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
There should be a message that says "SafeBoot." After the Mac is completely booted, try restarting and see if the issue is gone.

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help.

I have Late 2011 Macbook Pro and zxcv keys are not working?

I have late 2011 Macbook Pro and the zxcv keys are no longer working. Once I connect USB keyboard I can utilize these keys. Do anyone have solution?

How did you try to use Acitivty Monitor?
Open Activity Monitor, choose "All processes" from the list, and sort processes by CPU usage. More likely than not, there will be task using up good bit of CPU.
You could also try resetting SMC:
http://support.apple.com/kb/HT3964

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

I have an older macbook pro os x 10.5.8 , processor 2.4ghz intel core 2 duo 2gb . Can I upgrade it and is it worth doing?

i have an older macbook pro os x 10.5.8 , processor 2.4ghz intel core 2 duo 2gb . Can I upgrade it and is it worth doing?

Yes. Here's the information:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Only you can decide if it's worth doing.

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

I have a 2011 MacBook Pro and installed Mountain Lion recently and I want to uninstall it to my old software how do I do that?

Please help me out I really don't like the Mountain Lion software, the old one i had was much better and I can't seem to figure out how to get back to the one I use to have.

if you plan on doing an internet recovery install of your old os which is Lion - keep in mind that everything will be erased in your hard drive. your files are gone - unless you have made copies of them in another drive.
you will have to reinstall everything over again. if you're prepared to do that, then click on the link below to learn on how to start internet recovery since booting through your recovery partition will reinstall Mountaln Lion.
Force Lion to Start Internet Recovery.
Now, if you have a early 2011 Macbook Pro - then it came with Snow Leopard - use your install disk to reinstall.

I have a 2011 MacBook Pro and the battery has died what kind of battery do I need?

What kind or battery does my late model 2011 MacBook Pro need?

The one that your Apple Store or your Apple Authorized Service Provider will install. MBPs from 2010 on forward do not come with user-replaceable batteries and special tools are needed to remove the one within. Plus whatever one you get outside of the official channel will cost the same if new, so there is no sense in going solo on this.

I have created a Apple ID but the e-mail adress is invalid due to a typo. I could purchase apps in the store but now the store is requesting a confirmation (after several month) and I cannot confirm the ID as the e-mail is invalid. What can I do?

I have a IPAD. During the initialisation I had to submit an Apple ID. I have one, but unfortunately I had a typo in the adress. I could purchase apps with the invalid adress but now (after several month) it is asking for verification. This is not possible as the e-mail is invalid
What can I do?
Thanks for your help!!

The good news is you should be able to get into your Apple ID by answering security questions instead of email at appleid.apple.com. Click the Manage Your Account and then Forgot Your Password links. If you get in you'll see the place to change your primary email address.
The bad news is there are some issues with Apple ID accounts right now. Some accounts are unable to change their primary email address (Mobile Me accounts in particular), some accounts cannot even log in because Apple has screwed up the security information (for example, I have 2 Apple ID accounts where it tells me my own birthday is invalid).
So give it a shot.

Hi i bought a new 500gb hard drive on my 2011 macbook pro, it is a blank hardrive and i forgot to save my other files on an external hard drive , i have a usb stick with mavericks installed on it. can i just go ahead and do a straight install by using it?

hi i have a macbook pro 2011 model, i decided to upgrade my hardrive and bought a 500gb blank hardrive, my query is because i wasnt able to save most of my files and my operating system to an external hard drive, i have a usb stick with a mavericks os installed on it. will i be able to do a straight install by just doing this method? i will be grateful for any tips or help u might offer, thanks.

Is it just bootable or does it have the Mavericks installation files on it? If so, yes. If not, no. You might consider getting an external enclosure. Put your old drive in it and boot to its Recovery partition. You can install from there. As a matter of fact, you can run Migration Assistant and get all your stuff over too.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1396656137&sr=8-3&keywords=2.5+enclosure

HT2404 I have a 2011 macbook pro 13". I am trying download software for the clear network and it won't let me saying I'm running in a 64 bit mode and I need to change my computer to a 32 bit mode before downloading. Is that possible and how do I do it?

I am trying to download software for the clear internet network. It is telling me that I am running in a 64 bit mode and
need to be in a 32 bit mode to run their software....can I and how do I change it to a 32 bit mode?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Late 2011 Macbook Pro wont upgrade to Mavericks or restore from time machine backup

I recently tried installing Mavericks on my MBP, but during the installation, it will hang up and restart. I then tried to restore with time machine, same issue. I have used check disk and repair, no issues. I have a boot camp partition on the hard drive as well. When mavericks first came out, I tried to install with the same issues, and I remember recieving an error saying core services couldnt be found. I was able to restore from time machine then.
I have cleared the PRAM, repaired the hard drive, attempted a clean install from a bootable usb, and re-install the OS from the recovery partition with no results. At this point, the mac is a aluminium paper weight.

I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that

Similar Messages

Maybe you are looking for