I have a 22 inch monitor set at 150% but since I installed Firefox, the font is too small and the screen is too small. Cannot make font or screen larger. I can do Control++ each time I enter a page but don't want that to be my solution.

In control panel/display, I had my display set at 150% and at 1680 X 1050 resolution. This filled my 22 inch screen with the page content. Now that I have installed Firefox, the font is too small and the content is centered in the screen leaving about3" per side of blank space. I want to fill the screen and make everything larger. Haven't found a way to do that. Firefox tells me in my control panel/display window that by setting my display at 150%, "some items may not fit in your screen if you choose this setting while your display is set to this resolution. It worked fine with Explorer.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Similar Messages

I've tried everything suggested, but since I installed Firefox 3.6.14 it will not start up at all. How can I reinstall 3.6.13?

My System: Windows XP

What problems are you having with the install? Any visible information when you try to start it?
You can get .13 from
http://download.mozilla.org/?product=firefox-3.6.13
(Remember it has known security flaws and surf safe.)
Three things to try:
1) Start with .14 in safe mode. There should be a Safe Mode start-up link in the programs menu, or you can add -safe-mode to the shortcut.
2) Start .14 with profile manager and create a new profile (add -profilemanager to the shortcut).
3) Uninstall and reinstall Firefox .14.
If a new profile solves your problem but want to keep some of your old profile try this: 1) install .13 2) add the Firefox Sync extension, create an account, and save the profile, 3) install .14, create a clean profile 4) install Sync and pull over your saved profile.
The steps in the previous paragraph might not work: Step 4 might prevent the new profile from working (if it copies the bad state). You may need to experiment and only pull over part of the profile. Pulling over everything but the preferences is probably what will solve this type of problem.

I can't log in using password. Each time I enter the log in box comes back unpopulated with my password.

I can't log in to the Imac. Each time I enter my password it is initially accepted then the screen reverts to the log in dialogue box again withhout being populated by the password entered.

Do you have FileVault turned on? People have posted it is requiring a double login.

On my new ipad 2, i cant download any app, each time i enter my App Id , it takes me where i have to enter 3 security info, then once finished it says " your session timed out, try again " !!!!

On my new ipad 2, i cant download any app, each time i enter my App Id , it takes me where i have to enter 3 security info, then once finished it says " your session timed out, try again " !!!!

Call apple.This happened to me in August when i bought mine. They will reset the 3 passwords.

I have a 30 inch monitor on my mac pro tower that just went black, what do I do to fix it?

I have a 30 inch monitor on my mac pro tower that just went black, how can I get it back on?

He's asking what are those things you are using, i.e., ...
What video card are you using?
What version of OSX are you using?
What model of mac pro are you using (e.g., 2010 Mac Pro is 5,1).
And also,
Try smc and pram reset.
And see if the monitor lites up if you boot in safe mode.
It is possible your monitor simply failed -- its power supply or something else.

I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
== This happened ==
Every time Firefox opened

Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
The first is labeled "Printer",
The second is "Presets".
The third is unlabeled but has "Copies & Pages" selected by default.
Click on that third menu and select "Firefox" near the bottom of the list.

TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

I can't print an item,and each time I attempt to do so a message reads that the item is either spam

I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
What gives?

What is the format of the item you are attempting to print (via ePrint?)? Is it a supported format? See an updated list here.
Although I am an HP employee, I am speaking for myself and not for HP

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to FL and switched to Comcast (only option). Now when I access one of my banks, I can get past the login page and the opening page of my account but the data is unavailable. Bank no help.

I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.

Harden your Mac against malware attacks

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

Do you experience the same issue on other WiFi networks?
Do any other iOS devices experience the same issue on your network?
Make sure you follow all steps provided in the article below:
iOS: Troubleshooting Wi-Fi networks and connections

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0.

Hello i have a problem with my macbook pro become to slow to write any thing, to do any thing and the fan is always on never stop what can i do?

hello i have a problem with my macbook pro become to slow to write any thing, to do any thing and the fan is always on never stop what can i do?
i already reinstall the software many times and still the same i dont know what is happening is there is somebody who can help me please im will waiting

There are any number of possibilies... you could have problems with runaway applications, causing your machine to overheat and setting the fans off, you could have bad fan sensors, etc.
Open Activity Monitor (Applications>Utilities) and see if you have any apps that may be hogging the CPU. Call back.
Clinton

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

Have you ever even used skype on an iphone or ipod? We tried it and there is no way to type to each other while you are video chatting. You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

I have a 22 inch monitor set at 150% but since I installed Firefox, the font is too small and the screen is too small. Cannot make font or screen larger. I can do Control++ each time I enter a page but don't want that to be my solution.

Similar Messages

Maybe you are looking for