I have a 2nd Display that turns purple.

I thought this was a problem with the Samsung display and bought a Acer replacement. The Acer turns purple too on occasion.

Could be a GPU issue. Considering the computer is about closer to 8 years old you may want to consider replacing it. However you can also take it to an Apple Authorized Service Provider (AASP) to be professionally diagnosed. You can contact one by clicking https://locate.apple.com/country

Similar Messages

HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes. I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

My Mac Book Pro display has turned purple/blue, - why?

My screen started to flickr and has now turned purply/blue as if something has died..any one know why?

Your first choice is to go to System Preferences>Displays>Color. Make sure that your profile set is the appropriate one for the MacBook Pro, which should be "Color LCD".
I'm going to skip all of the normal suggestions of resetting this and that, because from what I've researched this in the past, and it appears you have an issue with either the graphics chip (low probability) or a worn cable causing one of the color channels to be bad or your LED screen has a problem.
In other words, it's probably hardware related.

2nd Display not working on iMAC

I have a 2nd display that has recently stopped working with my iMAC - I had issues with the second monitor before I upgraded to 10.9 - then the problems went away ... had a bad storm one night and power flickered on / off. And can't get it to work since. I know the monitor / cord is good because i have an Mac Air and I plug it in and it comes right up and works great. I cleared the system log - unplugged and replugged the monitor in.. i don't see any errors in the system log.. can anyone see what is wrong? I cleared the log and put a marker on each side of the output.. I looks to me to see it - it say display added then right after that display removed..
4/11/14 10:19:24.832 AM Console[11817]: Marker - Apr 11, 2014, 10:19:24 AM
4/11/14 10:19:27.809 AM WindowServer[96]: Received display connect changed for display 0x42c0140
4/11/14 10:19:27.814 AM WindowServer[96]: Found 60 modes for display 0x042c0140 [39, 21]
4/11/14 10:19:27.835 AM WindowServer[96]: Received display connect changed for display 0x3f003d
4/11/14 10:19:27.835 AM WindowServer[96]: Found 1 modes for display 0x003f003d [1, 0]
4/11/14 10:19:27.836 AM WindowServer[96]: Received display connect changed for display 0x3f003e
4/11/14 10:19:27.836 AM WindowServer[96]: Found 1 modes for display 0x003f003e [1, 0]
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 60 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x1cbf8fef38ae9dfec93508341d780c47, ColorProfile { 2, "iMac"}
4/11/14 10:19:27.849 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.849 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.849 AM WindowServer[96]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.850 AM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.869 AM WindowServer[96]: Display 0x042c0140: Unit 0: Startup Mode 2560 x 1440, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80000000, ioModeDepth 0x2, IOReturn 0x0
4/11/14 10:19:27.869 AM WindowServer[96]: Display added
4/11/14 10:19:27.869 AM WindowServer[96]: Display removed
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x042c0140: GL mask 0x1; bounds (0, 0)[2560 x 1440], 60 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model b005, S/N 0, Unit 0, Rotation 0
UUID 0x1cbf8fef38ae9dfec93508341d780c47, ColorProfile { 2, "iMac"}
4/11/14 10:19:27.870 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.870 AM WindowServer[96]: GLCompositor: GL renderer id 0x01022724, GL mask 0x0000000f, accelerator 0x0000449b, unit 0, caps QEX|MIPMAP, vram 1024 MB
texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.870 AM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
4/11/14 10:19:27.899 AM WindowServer[96]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042c0140 device: 0x7fccf9d04630 isBackBuffered: 1 numComp: 3 numDisp: 3
4/11/14 10:19:29.836 AM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/11/14 10:19:29.868 AM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
4/11/14 10:19:29.881 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.893 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.907 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:29.934 AM WindowServer[96]: Display 0x042c0140: Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
4/11/14 10:19:38.781 AM Console[11817]: Marker - Apr 11, 2014, 10:19:38 AM

You can attempt to use Apple Hardware Test, if you do run it in Extended Mode 2-3 times. It's not the most reliable test however if it does locate an error that confirms you have a hardware fault that needs to be fixed. The ONLY alternative is to take it in for service. However IMHO I'd take it in to an Apple Store or AASP anyway, because A) AHT is not that reliable and B) even if it does find something that means you have to take it in.

Why does my iMac, running snow leopard, turn on by itself? I have looked for anything that might be causing this, but haven't found the solution.

I have an an iMac that turns itself one everyday at the same time. I am trying to stop this but haven't found what's causing it. What is causing this?

Check the schedule in the Energy Saver pane of System Preferences.
(74319)

ADC from vid card to a VGA 2nd display, out of stock?

We have an old quicksilver G4 800 mhz tower that a co-worker wants to have a 2nd display attached to. The card has 2 outputs, a VGA and an ADC. About a year ago, I went to our local Apple Reseller (not an apple store) and bought a ADC to VGA adaptor for 30 bucks (for another machine in use). It was by Dr. Bott. There is nothing on their website now. Dr. Bott service stated that Apple had something to do with the discontinued status? Locked down their technology?
Some site show any ADC to VGA adaptor discontinued.
What is up?
Alternatives? Should I just get a new cheap graphics card? or are there ther alternatives. Yes, this is old technology, and we will get new computers, but we will have this machine a few more years...
Thanks for any help
Mac Pro 2.66 Ghz Mac OS X (10.4.7)

Apple did not try to stop others from using ADC. They made it an open standard, but few other manufacturers used it. Formac did make a LCD display with ADC. Most display makers didn't want to make models that would only work with a Mac, even though it would be cheaper (no power supply needed). Other computer makers didn't use it because they would need bigger power supplies (Apple made a CRT with ADC that needed 113 watts), adapters would be needed for most displays, and they would need special graphics cards. Because of lack of demand from other computer makers, no graphics card maker made any ADC cards for non-Apple computers.
Apple dropped AC for several reasons:
Multiple displays were being used more, and there was only one ADC per computer. DVI to ADC adapters are expensive and messy.
They wanted to sell their displays to non-Mac users.
Bigger displays needed more power (30" needs 150 watts)
With their main customer gone, the connector maker dropped the connectors, so adapter makers have no more parts for the adapters. Adapters are now scarce and expensive, but it's not Apple's fault.
There are still a few ADC to VGA adapters for sale:
<http://www.mac-pro.com/s.nl/it.A/id.230/.f?sc=2&category=128>
<http://www.welovemacs.com/mcaadcvga.html>
If the Quicksilver is the earlier (2001) model, such as the dual 800 Mhz, the adapter won't be useful with any of the graphic cards that originally came with it. It will work with 2002 Quicksilvers, such as the single 800MHz.

LR5 - Photos in 2nd Display are blurry / don't render completely - intermittent issue

Just upgraded to Lightroom 5, and the performance issues I saw in 4 appear to be gone - which is awesome. I've come up on an issue that I've seen referenced in other posts, but only for LR4. Also, the issue seems to be slightly different than mine. My issue is that when I have the 2nd display running in Loupe mode, the image won't render completely and looks blurry/fuzzy, when in Develop mode on the first screen. However, it's not every time. Sometimes it works fine. Sometimes it takes a few seconds, and then it works. Sometimes, it doesn't ever work. It just sits in a blurry state - not fully rendered. Sometimes if I go to the next photo, and then back, it will then load. Sometimes that doesn't work.
While I did have tons of performance issues in LR4 (including 4.3 and 4.4), this was not something I remember seeing.
I'm running Windows 7 64-bit, i7 2600-K, 24gb RAM, multiple SSDs.
Any help would be appreciated.

I'm having the exact same problem in LR5
Selecting another picture and coming back usually fixes the problem.
Windows 7 64-bit, Core I7 2600-K, 32GB RAM, NVidia Geforce GTX 580 - driver version 320.49 WHQL

Run iPhoto slideshow on 2nd display without 1st display going black?

Hi there,
I can't seem to find a clear answer on this one. I have just connected a 2nd display to my mac mini via the thunderbolt connection. When I put iPhoto 11 onto the 2nd display desktop and run a slideshow it plays on the 2nd screen but my 1st screen goes black, which isnt ideal as I want to be able to carry on working on my 1st screen.
Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black? If not, is there a way around this by using other software?
I have the 2nd display set up in extended mode not mirror.
I am running OSX 10.9.2.
Many thanks,
Andy.

Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black?
No.
There may well be, but it's not possible with Aperture either.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

I have a 2nd generation iPod that only displays an image of the cord, and an arrow to connect to iTunes. I've done this and it says it needs to be restored. Tried that but I get an error: 1611. Any suggestions?

I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else. I tried turning off using both buttons...nothing. Any suggestions?

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

HT201412 I have an iPad 2 that just stopped working...no display...won't turn on...tried all steps in above article.

I have an iPad 2 that just stopped working...no display...won't turn on...tried to sync to iTunes and couldn't because I need to put in my passcode. There is no display, so can't do this. Am dead in the water. Does anyone have ideas to solve this issue?

Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

EMac 700MHz display turned purple/pink. Can't boot from HD and CD

hi,
I have several issues here:
1) My eMac display turned purple/pink from the start
2) It won't start from either HD or CD. It gets to the grey Apple and the spinning wheel.. After a while of spinning, it freezes and nothing else I can do. This happens on booting from HD and CD.
Please help.

try unplugging the cord for an hour or so. unplug it completely, from where it goes into the machine as well as the outlet. if that doesn't work, you could also try a pmu reset. instructions are found in part 6 of this article. http://docs.info.apple.com/article.html?artnum=34885 let me know if that makes any difference.

I can't seem to turn off my 2nd display (with no adapter plugged in)

Been looking on the internets for ages about this and not got anywhere, so did a completely fresh install last night.
The problem is that the DVI (2nd display connection) thinks that I have a VGA display connected (i.e. the 2nd display) when I plug in the DVI-VGA adapter to use with a TV that works fine. The 2nd display resets to align itself to the TV connected.
When I disconnect the adapter the Mac resets it display. Back to having this phantom display connected.
I've plugged in the DVI-VGA adapter as well and then carefully removed that and sameroblem.
Having done a fresh install that would mean it's not a software issue, so it has to be a hardware one? Something with the actual connection? Does anyone know of any potential problems as to why this would happen?
I've tried some compressed air. (I've lost the straw so it was straight from the can, spray paint style)
Please help.
Thanks.

Anyone?

On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

Sirs,
The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
Can you make them stop, or at least explain how it is that anyone can do this without our permission.
We have never allowed advertisement on our website and don’t plan on starting now.
I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
I would appreciate any expediency in the return of an answer that you can provide.
Kindest Regards,
Dave Broeker
VDHA Life Member #1797
VDHA Webmaster & BX Manager
http://vdha.us

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

I have a 2nd Display that turns purple.

Similar Messages

Maybe you are looking for