I have a 2T apple time capsule and router. I bought a Hauppauge WinTV extender which allows regular TV to be broadcasted on a PC. The program allows streaming to a Mac or iPad, iPhone, etc. I need to open a port on the router to allow this to work.

I have a 2T apple time capsule and router. I bought a Hauppauge Win TV extender which allows TV to be broadcasted on a PC. The program allows for the TV to be streamed on a Mac, Iphone, Ipad. I need to access the router set up options to open a port on the router to allow this program to stream the TV to the Mac and Iphone. I do not know how to access the apple time capsule router to change the settings to open a port on the router. help please.

Firstly you do not need to open ports to stream locally.. there is no port block in local LAN.. only WAN to LAN. So there is a good chance it is not needed at all..
Opening ports on the TC I strongly recommend a v5 airport utility.. you can download one for windows if you don't have a Mac.. iOS version of the utility I am not sure but it will not work to do complex things.
In the v5 utility go to the NAT area, and click on port mappings.
Sorry I don't have a screen shot at the moment of the actual mapping page.. but simply put the IP of the device you want opened and the port.
There are plenty of posts with this info if you google.
But as noted.. this is purely WAN to LAN.. nothing else.

Similar Messages

I have an apple time capsule and am about to have xfinity cable and internet hooked up in my new apartment. The cable provider said I need a modem that is Docsis3 capable - will my time capsule do the job or do i need another modem? Thanks

I have an apple time capsule and am about to have xfinity cable and internet hooked up in my new apartment. The cable provider said I need a modem that is Docsis3 capable - will my time capsule do the job or do i need another modem? Thanks

will my time capsule do the job or do i need another modem?
The Time Capsule is only a router...with a built in hard drive. It does not have a modem built in, so you will need to use a separate modem with your new calbe service.
If the cable provider offers a modem with their service it would be good idea to use that device, as you know that it will be supported by your provider in the event of any Internet connection difficulties.
If the provider does not offer a modem, I am sure that they have a list of compatible modems on their website, or check with customer support for more information.

I have a 1st generation time capsule and an extreme b/g. Is the extreme slowing the network down

I have a 1st generation time capsule and an appe extreme b/g. Is the extreme slowing the network down? Should I dump it an get the new n version?

yes it is likely to be slowing down the network because you are using 802.11b/g
from what i recall with b/g a slow client can slow down the entire network to that clients speed.
this was the major improvement with 802.11n and Mimo. each client can be connected to the access point without affecting your speed to the rest of the network
its reccomended to get all new "N" equipment if you have the budget for it. some of those old airports and time capsules can still be worth something on amazon marketplace so you might be able to sell them
if you want to create / join / extend a netwowrk your going to probably need all "n" based equipment.
buy the new 4th generation time capsule or the new 5th generation airport they have better stronger radios
in the mean time configure your base station router to a high multicast rate, so it will prevent devices connecting to it at 1-2 mbps speeds and slowing down your network
if you have an apple care covered mac remember the airport / time capsule rule. all airports and time capsules purchased 2 years before you bought your mac to the 3 years of apple care covers them. if you do not have apple care then the standard warranty applies

Apple Time Capsule and Comcast Internet.. a Relationship from HE77

Hello,
I cannot believe I have waited this long to ask for help from you guys, but here I am pleading for advice..
I have Comcast Internet, and Direct TV television service. I've been experiencing major issues with both but I think that I've realized the issue. My wifi signal with Comcast All in One or the seperate modem.router they tried SUCKED!!! But I'm pretty sure that the issue is the fact that I have 2 digital baby monitors that run on a 2.4ghz frequency, which is exactly the frequency that Comcast wifi runs on.
The reason why I brought up the Direct TV thing is bc I've had them at my house several times because my Whole Home Media Center simply would not stay online, and when it did, its speeds were so slow downloading on demand content. But, everything in my house is slow, not just Direct Tv. This week the Direct Tv people hardwired their equipment directly to the Arris All in One Comcast router so that shoule alleviate that issue.
My thoughts are this. I know that my Apple Time Capsule can put off 2.4 as well as 5ghz frequency. So my questions are:
Can i have both the all in one AND the time capsule putting off their own wifi signals.. The all in one using their standard 2.4ghz for some things, and the Time Capsule putting of the 5.0ghz for others.. If so, how do I do this and not have any issues such as double NAT, and things like that?
Should I just put the All in One in Bridge mode, and simply use the 2.4ghz and 5.0ghz from the Time Capsule to address this issue? How do i do that? Also, would having the direct tv equipment plugged into one of the 4 ehternet ports on the All in One still allow it to pull internet from it, or should I just plug that into the time capsule as well?
Are there devices that for whatever reason will NOT be able to log onto the 5ghz frequency?
I keep hearing about bandwith this, and bandwith that.. I know I have a lot of devices pulling internet at once including, 5 direct tv recievers that somehow always need to be online, 3 iphones, 2 ipads, imac, apple tv, smart tv, laptop, xbox 360 (which really isnt ever even plugged in) Is there any reason to be fearful that the bandwith the Time Capsule puts out may not be able to handle this load any better or worse than the all in one?
I will but lunch and/or dinner for anyone that can help me get this working, i swear!!

But I'm pretty sure that the issue is the fact that I have 2 digital baby monitors that run on a 2.4ghz frequency, which is exactly the frequency that Comcast wifi runs on.
That will sure as anything mess up your wifi.
This week the Direct Tv people hardwired their equipment directly to the Arris All in One Comcast router so that shoule alleviate that issue.
Ah.. hard wired.. that is the solution. Do not use wireless for media streaming.. it is destined to fail.
Can i have both the all in one AND the time capsule putting off their own wifi signals.. The all in one using their standard 2.4ghz for some things, and the Time Capsule putting of the 5.0ghz for others.. If so, how do I do this and not have any issues such as double NAT, and things like that?
You cannot turn off 2.4ghz in the TC.. but that is unlikely to be an issue.
Bridge the TC.
Setup wireless to create a wireless network.. Use the same SSID as the Comcast all in one. Same security.. but use a different channel.. how you will do that with baby monitors x 2 I am not sure.. you may have to accept some overlap. There are only three non-overlapping channels, 1, 6, 11 .. pick the least signal one where you setup the TC.
Should I just put the All in One in Bridge mode
No you cannot do that. You can turn the wireless off though.
Also, would having the direct tv equipment plugged into one of the 4 ehternet ports on the All in One still allow it to pull internet from it, or should I just plug that into the time capsule as well?
That is why the unit cannot be bridged.. you will mess up the TV.
Are there devices that for whatever reason will NOT be able to log onto the 5ghz frequency?
Most old stuff.. only the most recent iphone and ipad are 5ghz. Most stuff requires 2.4ghz.
And there is an issue.. range of the 5ghz is poor.. you need high power wireless devices.. and none of the apple routers rate above mediocre. Even high power ones suffer dropoffs.
I keep hearing about bandwith this, and bandwith that.. I know I have a lot of devices pulling internet at once including, 5 direct tv recievers that somehow always need to be online, 3 iphones, 2 ipads, imac, apple tv, smart tv, laptop, xbox 360 (which really isnt ever even plugged in) Is there any reason to be fearful that the bandwith the Time Capsule puts out may not be able to handle this load any better or worse than the all in one?
To be honest it is not going to fix the basic problem.. you probably do not have enough internet bandwidth share.. but the more devices connected the lower time slice each one gets .. that isn't the main trouble though.. it is the efficiency also drops off. Apple routers have no QoS.. this is important.. some things need real time connections.. streaming media, voip, etc.
Other stuff doesn't .. uploading or downloading email or updates. It is important that a choked system has a way of getting the best out of limited resources.. and that is QoS Quality of Service.
Look at a better router.. I recommend Asus RT-N66U as having far superior range and handling QoS.
You should also do a proper site survey to see how much wireless signal you really have.. but again you run into trouble.. the baby monitors are not going to show up unless they are wifi based, which is unlikely.
Sorry but until you can finish with the baby stuff you are going to have to live with non-ideal world.

Apple time capsule and BT Hub 3

I have just swapped over to BT and have recieved the Hub 3.
My original setup was using an apple time capsule providing my WIFI network, and then using the previous ISP router just acting as a modem. I would like to do the same with the BT home hub 3 as I have a reasonable complicated WIFI network for which the time capsule is already set up and working fine and I do not want to change this.
All I am wanting to do is plug the time capsule into the HUB 3 using an ethernet cable, but I cannot seem to get it to work. The previous router had a WAN port, but the HUB 3 does not seem to have one. Any ideas?

Hey Tommy,
I anticipate being in a similar situation to Roger, in that I’ve three WiFi computers [1] that I need to migrate...
• from – Virgin Media FTTP modem » ethernet cable » Apple Time Capsule
• to – BT Infinity FTTC Openreach modem » ethernet cable » Apple Time Capsule
...during or after the BT engineer’s BT Infinity installation visit next Thursday.
Thanks for your tips on integrating an existing Apple Time Capsule into a BT Infinity set-up. As I understand you, you’re suggesting swapping from the regular BT Infinity set-up...
The regular BT Infinity set-up (source image page)
...for an Apple Time Capsule based BT Infinity set-up, like this:
An Apple Time Capsule based BT Infinity set-up (source – tommybobbins suggestion in the post above this one)
But AFAIK, it’s the BT Home Hub 3 that provides support for the mutual aid BT FON network; am I correct in thinking this Apple Time Capsule based BT Infinity set-up would deprive other BT customers of a BT FON WiFi hotspot?
AN ALTERNATIVE SET-UP SUGGESTION
I notice that the Openreach modem actually has what looks like two identical LAN ethernet ports side by side:
BT Openreach modem, illustrating dual ethernet LAN ports (source image)
So is it feasible to set up both the BT Home Hub 3 AND an Apple Time Capsule with just the addition of a second ethernet cable?
For instance:
A dual Apple Tim Capsule + BT Home Hub 3 Infinity set-up
Would this set-up work?
If so, would it provide a seamless migration for my three WiFi computers (once the Time Capsule’s been reconfigured with Airport Utility to use PPPoE, as per your instructions), AND a mutual aid BT FON network WiFi hotspot?
[1] Three WiFi computers:
• Apple MacBook Pro 17-inch notebook, running OS X 10.5.8
» http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2.5-17-early-2008-pen...
• Notion Ink ADAM 10.1 inch tablet, running Linux (Android 2.2)
» http://www.notionink.com/techspecs.php
• Nokia N900 3.5 inch tablet, running Linux (Maemo 5 v21.2)
» http://www.developer.nokia.com/Devices/Device_specifications/N900/

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

Apple TV Do I need to open a port on my router

Do I need to open a port on my cisco router for my ipad to mirror on the tv.
I have internet access on the Apple TV and ipad I just can't mirror

Ports used listed here:
http://support.apple.com/kb/HT2463
(If it doesn't load 1st time refresh the page).

I need to open specific ports in the firewall - how do you do that?

Hi There,
I'm trying to setup a web development server on a spare mac mini but I can't figure out how to open ports for the MySQL server under Snow Leopard.
Is there a way to do this? I've set the firewall to allow MAMP to open ports whenever it needs to but when I do a port scan of the Mac mini the MySQL port doesn't show up - SSH, HTTP and VNC do however.
I'm happy to configure it via the Terminal but I can't find any info on how to do this in Snow Leopard as I think it's different from Leopard (based on what I've found online).
e.g.
$ ipfw show
Gives me an error:
"ipfw: socket: Operation not permitted"
Any help would be much appreciated
Cheers
Ben

After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
Will try WaterRoof and see what happens.
Cheers
Ben
Message was edited by: Ben Sciascia

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

I have a time capsule and airport express one floor lower, the signal keeps dropping. Would an airport extreme give me a longer range for wifi?

I have several computers. My equipment is upstairs in a house, apple time capsule and downstairs airport express. Lately the downstairs computer keeps disconnecting from the internet. Would replacing the airport express with and airport extreme give me a greater range for my wifi connections?

Yes. Question is... would the difference be enough.
The extreme has a bigger & more powerful antena array. But if that alone still doesn't suffice, you also have the option to use the express to EXTEND from the Extreme.

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

Time Capsule and the rest of the network

I have today installed my Time Capsule and I am not sure that I have configured everything in the optimum way. Everything works so far and it's backing up via Time Machine etc.
the thing is, in my office we have PC's and 1 Mac (mine). We have a network and a wireless access point. Everything is connected to a switch. So, I have connected a LAN cable in the WAN port of my Time Capsule (TC). The other end goes to the Switch. The DSL modem is connected to the same switch. My MacBook Pro (MBP) was previously connected to the WLAN router that is also connected to the same switch.
Now I am not sure how things are interacting. What I want is for my MBP to connect wirelessly with my PC that goes out on the internet over the DSL modem via the Switch.
When I click on my AirPort icon on the top of the screen it seems that I am still connected to the old WLAN.
I am also not sure if I should connect my LAN cable to the WAN port of the TC or one of the Ethernet ports.
Here's how I'd like it to work:
The DSL modem goes to the Switch. To the switch is connected a whole bunch of PC's, plus 1 wireless router and the TimeCapsule. The TC connects wirelessly with my MBP. I don't want the MBP to connect to the old wireless router any more.
I hope this is not too confusing. Btw, I never had to put in my key for the existing WLAN when I installed the TC. I am not sure how the TC connects to the internet.
Does anyone know how I can verify over MobileMe if the TC is connected to it?
Message was edited by: philmarriott

Yes, you are right. There is a router between the switch and the modem. I forgot about that. The router also provides the WLAN here in the office.
After some investigation I found that when I select "create network" in the Time Capsule settings there is a second WLAN network created in parallel with the one we already have. The problem was that these 2 WLAN's had the same name. After changing the name of the WLAN from the TC I was able to distinguish them.
I couldn't find any information anywhere on how to use the WAN/LAN ports on the TC so I had to call Apple care to find out.
Another question if someone knows - how access the TC from the Internet? I have MobileMe and I have put in my username and password. Suppose that I go to a remote place in the world and find that I need a file on my TC. I connect my MacBook to the Internet and.......then? How access the TC?

1st Gen Time Capsule and External Hard Drive Issues

I have a 1st generation Time Capsule and have never had any luck connecting an external hard drive (both Western Digital MyBook and Seagate FreeAgent Pro) via an USB hub for an extended period. They will connect for a few hours or up to a day or two before they lose the connection and look up the wi-fi connection (although the internet and connected printer don't seem affected). Thought it might be an issue with the powered hub, but have same issue with both (Belkin and APC). I have read that others have had similar issues.
For laughs, I connected a dinky personal drive (WD My Passpoert 750gb) to the USB hub and it came up instantly and had no issues for the 12+ hours it was connected. Question #1: can I run a portable drive for an extended period of time (weeks, months, years) via USB hub without killing it?
Also, I would like to house my large iTunes and iPhoto libraries to be accessed by 3 different MacBooks. Question #2: is a NAS drive connected directly via ethernet to the TC is the best answer?
I am spoiled by the simplicity of the plug-and-play connectivity of Apple products. Is there a mysterious sequence of procedures that I need to follow to get the Time Capsule to play well with the USB connected HDs?
Thanks in advance for your help.

To answer the general question, a drive that is constantly spinning is both more likely to be damaged and less likely to give issues of access to the USB.. the one fights the other. Feel the small passport drive and see if it is continually spinning.. if so that could account for it maintaining connection.. although according to your testing 12hrs is not long enough to know for sure. Feel the other drives. If they spin down and then when you try to access them, do they spin up? Or is it the spin down time that dictates the time they are available on the network. It may simply be a case of usb connected to a router is not getting the correct spin up info.
IMHO a NAS is the right way to do this.. especially if you have multiple computers accessing it. USB is not a fast connection. Especially hanging off the TC series 1, were not renowned for speed. A NAS is not that expensive now and using a mirrored raid you at least have some protection. Remember to always have the source files in mulitple locations. A NAS can also work as an itunes server, which the TC cannot. And the connection from gigabit ethernet to sata is not made via usb.
As a secondary option.. open your series 1 TC and put in a 2TB hdd.. this is well documented.. larger sizes give trouble but the series one can easily be updated to 2TB.. remember also the power supply in a series one can go at any moment. Get ready for it, plan for it.. one day it will happen.

Can an Apple Time capsule be used as a external hard drive?

Hello I have a 4th Generation time capsule and I've had it for some time now and never used it and I was wondering if it could be used as a external hard drive instead of just a back up disk. Also I am planning to install a copy of Windows 7 on my Mid 2011 21.5" iMac and I was wondering if Windows would recognize the TC as a external hard drive and would alow me to use it as such.

It is not an external hard disk.. you cannot use it via USB if that is what you mean.
It is now and forever more a Network drive. You can store files on it as a network drive.. with the following provisos.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html
Windows can also use the TC for files. Much the same warnings apply.

Time Capsule and Mac disconnecting frequently while other devices connected

I have had my Time Capsule and my MacBook (pre-2008 update) for some time now and it seems like once every week my Mac cannot see the Time Capsule and the utility claims that there are no wireless networks in range and it requires a powercycle and a few minutes to reconnect (usually making me re-enter my network since the SSID is not broadcasted due to security reasons where I live; even though I have it set as my only preferred network). My Xbox 360, PS3 and iPod Touch are all connected at this time and generally perform fine. The problem is only with my Mac and my Time Capsule.
Is the Mac's wireless card faulty or is it something I'm not seeing right away? Any thoughts at all are totally welcome. I have Applecare and live near an Apple store, I'm just not sure which item would be at fault if any.
Thanks much!

I have similar issue with Time Capsule and Airport Extreme. They both worked fine until about 2 weeks ago, now they show green but do not show on the Airport Utility. If I unplug and replug the TC it works (50%) of the time, but the remote speakers on the Airport Extreme do not. I have done a hard reset on Both .. same results.

I have a 2T apple time capsule and router. I bought a Hauppauge WinTV extender which allows regular TV to be broadcasted on a PC. The program allows streaming to a Mac or iPad, iPhone, etc. I need to open a port on the router to allow this to work.

Similar Messages

Maybe you are looking for